IEEE 675-1982 en Standard Multiple Controllers in a CAMAC Crate《CAMAC系统内的多重控制器》.pdf

1、Recognized as anAmerican National Standard (ANSI)Copyright 1982 byThe Institute of Electrical and Electronics Engineers, Inc. 345 E. 47th Street, New York, NY 10017No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the priorwritten perm

2、ission of the publisher.IEEE Std 675-1982(R2006)(Revision of IEEE 675-1979)IEEE Standard Multiple Controlers in a CAMAC1CrateSponsor Instrumentation and Detectors Committeeof theIEEE Nuclear and Plasma Sciences SocietyReaffirmed March 30, 2006Approved September 17, 1981IEEE-SA Standards BoardReaffir

3、med December 21, 1990Approved December 15, 1981American National Standards Institute1Computer Automated Measurement and ControlIEEE Standardsdocuments are developed within the Technical Committees of the IEEE Societies and the StandardsCoordinating Committees of the IEEE Standards Board. Members of

4、the committees serve voluntarily and withoutcompensation. They are not necessarily members of the Institute. The standards developed within IEEE represent aconsensus of the broad expertise on the subject within the Institute as well as those activities outside of IEEE whichhave expressed an interest

5、 in participating in the development of the standard.Use of an IEEE Standard is wholly voluntary. The existence of an IEEE Standard does not imply that there are no otherways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEEStandard. Fu

6、rthermore, the viewpoint expressed at the time a standard is approved and issued is subject to changebrought about through developments in the state of the art and comments received from users of the standard. EveryIEEE Standard is subjected to review at least once every ve years for revision or rea

7、frmation. When a document ismore than ve years old, and has not been reafrmed, it is reasonable to conclude that its contents, although still ofsome value, do not wholly reect the present state of the art. Users are cautioned to check to determine that they havethe latest edition of any IEEE Standar

8、d.Comments for revision of IEEE Standards are welcome from any interested party, regardless of membership afliationwith IEEE. Suggestions for changes in documents should be in the form of a proposed change of text, together withappropriate supporting comments.Interpretations: Occasionally questions

9、may arise regarding the meaning of portions of standards as they relate tospecic applications. When the need for interpretations is brought to the attention of IEEE, the Institute will initiateaction to prepare appropriate responses. Since IEEE Standards represent a consensus of all concerned intere

10、sts, it isimportant to ensure that any interpretation has also received the concurrence of a balance of interests. For this reasonIEEE and the members of its technical committees are not able to provide an instant response to interpretation requestsexcept in those cases where the matter has previous

11、ly received formal consideration.Comments on standards and requests for interpretations should be addressed to:Secretary, IEEE Standards Board345 East 47th StreetNew York, NY 10017USAiiiForeword(This Foreword is not a part of ANSI/IEEE Std 675-1982, IEEE Standard, Multiple Controllers in a CAMAC Cra

12、te.)This standard makes provision for the use of auxiliary controllers in a CAMAC crate to extend the capabilities andelds of application of the CAMAC modular instrumentation and interface system of ANSI/IEEE Std 583-1982,Modular Instrumentation and Digital Interface System (CAMAC). (Also Report EUR

13、 4100e of the Commissions ofthe European Communities.) The report on which this document is based (Dept of Energy Report DOE/EV-007), wasprepared by the NIM Committee of the United States Department of Energy* and the ESONE Committee of EuropeanLaboratories*. Corresponding documents are ESONE Report

14、 EUR 6500e and IEC Publication 729 of theInternational Electrotechnical Commission.Auxiliary Controllers (ACs), located in several crates on a CAMAC Command Highway (Parallel Branch or Serial),can provide the user with an extremely effective distributed processing capability. This capability is usef

15、ul in both dataacquisition and automatic control systems where parallel processing is desirable. Auxiliary controllers can be ofvarious degrees of sophistication, and some may include processor elements for increased autonomy from centralcomputers.A further extension of the AC-based CAMAC system may

16、 include a special communication channel direct from an ACto another element in the system. High-speed block transfer of data can be effected to and from the AC in such a case.To permit use of the ACs in CAMAC crates, this report denes the hardware and protocol so as to:1) Provide means for granting

17、 control of the Dataway to auxiliary controllers that request control and to providea priority selection scheme to arbitrate in the case of simultaneous requests from multiple controllers.2) Provide means for the auxiliary controller to address (a) the dedicated module address lines and (b) thededic

18、ated interrupt request LAM (Look-at-Me) lines, all of which terminate only at the crate controllerstation and at the module stations to which they are dedicated.This standard was reviewed and balloted by the Nuclear Instruments and Detectors Committee of the IEEE Nuclearand Plasma Sciences Society.

19、Because of the board applicability of the CAMAC system, this standard was submittedfor review to liaison representatives of numerous societies and committees including the Communications Society,Computer Society, Industry Applications Society, Industrial Electronics and Control Instrumentation Group

20、,Instrumentation and Measurement Group, and the Power Generation and Nuclear Power Engineering Committees ofthe Power Engineering Society.The revision of this standard was in conjunction with the 1981 review (1982 issue) of the entire family of IEEECAMAC standards undertaken to incorporate existing

21、addenda and corrections into the standards.At the time of approval of this standard, the membership of the Nuclear Instruments and Detectors Committee of theIEEE Nuclear and Plasma Sciences Society was as follows:D. C. Cook, Chair Louis Costrell, Secretary J. A. ColemanJ. F. DetkoF. S. GouldingF. A.

22、 KirstenT. R. KohlerH. W. KranerW. W. ManaganG. L. MillerD. E. PersykP. L. PhelpsJ. H. TrainorS. WagnerF. J. WalterivAt the time it approved this standard, the American National Standards Committee N42 on Nuclear Instruments, hadthe following personnel:Louis Costrell, Chair David C. Cook, Secretary

23、American Conference of Governmental Industrial HygienistsJesse LiebermanAmerican Nuclear Society . Frank W. ManningHealth Physics Society. J. B. Horner KuperJ. M. Selby (Alt)Institute of Electrical and Electronics Engineers .Louis CostrellJulian Forster (Alt)D. C. Cook (Alt)A. J. Spurgin (Alt)Instru

24、ment Society of America M. T. SlindJ. E. Kaveckis (Alt)Lawrence Berkeley National Laboratory . E. J. WagnerOak Ridge National Laboratory. Frank W. ManningD. J. Knowles (Alt)US Department of Energy. Gerald GoldsteinUS Department of the Army, Materiel Command .Abraham E. CohenUS Department of Commerce

25、, National Bureau of Standards Louis CostrellUS Federal Emergency Management Agency . Carl R. Siebentritt, JrUS Naval Research Laboratory D. C. CookUS Nuclear Regulatory Commission.Robert E. AlexanderMembers-at-Large.J. G. BellianO. W. Bilharz, JrJohn M. Gallagher, JrVoss A. MooreR. F. SheaE. J. Val

26、lario*NIM Committee2L. Costrell, Chair C. AkerlofE. J. BarsottiB. BertolucciJ. A. BiggerstaffA. E. BrennerR. M. BrownE. DaveyW. K. DawsonS. R. DeissS. DhawanR. DowningT. F. DroegeC. D. EthridgeC. E. L. GingellA. GjovigB. GobbiD. B. GustavsonD. R. HeywoodN. W. HillD. HorelickM. E. JohnsonC. KernsF. A

27、. KirstenP. F. KunzR. S. LarsenA. E. Larsh, JrR. A. LaSalleN. LatnerF. R. LenkszusR. LeongC. LoggS. C. LokenD. R. MachenD. A. MackJ. L. McAlpineL. B. MortaraV. C. NegroL. PaffrathD. G. PerryI. PizerE. PlatnerS. RankowitzS. J. RudnickG. K. SchulzeW. P. SimsD. E. StilwellJ. H. TrainorK. J. TurnerH. Ve

28、rweijB. F. WadsworthL. J. WagnerH. V. WalzD. H. White2National Instrumentation Methods Committee of the US Department of Energy.Organization Represented Name of RepresentativevNIM Executive Committee for CAMACL. Costrell, Chair E. J. BarsottiJ. A. BiggerstaffS. DhawanF. A. KirstenR. S. LarsenD. A. M

29、ackJ. H. TrainorNIM Dataway Working GroupF. A. Kirsten, Chair E. J. BarsottiJ. A. BiggerstaffL. CostrellS. DhawanA. GjovigD. R. HeywoodD. HorelickC. KernsP. F. KunzR. S. LarsenD. R. MachenL. PaffrathS. RankowitzS. J. RudnickNIM Software Working GroupD. B. Gustavson, Chair W. K. Dawson, Secretary A.

30、E. BrennerR. M. BrownS. R. DeissS. DhawanC. D. EthridgeM. E. JohnsonR. A. LaSalleF. B. LenkszusC. A. LoggJ. McAlpineL. B. MortaraD. G. PerryNIM Mechanical and Power Supplies Working GroupL. J. Wagner, Chair L. CostrellC. KernsS. J. RudnickW. P. SimsNIM Analog Signals Working GroupD. I. Porat, Chair

31、L. CostrellC. E. L. GingellN. W. HillS. RankowitzNIM Serial System SubgroupD. R. Machen, Chair E. J. BarsottiD. HorelickF. A. KirstenR. G. Martin L. PaffrathS. J. RudnickNIM Block Transfer SubgroupE. J. Barsotti, Chair W. K. DawsonF. A. KirstenR. A. LaSalleF. R. LenkszusR. G. MartinR. F. Thomas, Jrv

32、iNIM Multiple Controllers SubgroupP. F. Kunz, Chair E. J. BarsottiF. A. KirstenD. R. MachenR. G. Martin*ESONE Committee3W. Attwenger, Austria, Chair 1980-81H. Meyer, Belgium, Secretary Representatives of ESONE Member LaboratoriesW. Attwenger, AustriaR. Biancastelli, ItalyL. Binard, BelgiumJ. Biri, H

33、ungaryB. Bjarland, FinlandD. A. Boyce, EnglandB. A. Brandt, F.R. GermanyF. Cesaroni, ItalyP. Christensen, DenmarkW. K. Dawson, CanadaM. DeMarsico, ItalyC. A. DeVries, NetherlandsH. Dilcher, F.R. GermanyB. V. Fefilov, USSRR. A. Hunt, EnglandW. Kessel, F.R. GermanyR. Klesse, FranceE. Kwakkel, Netherla

34、ndsJ. L. Lecomte, FranceJ. Lingertat, D.R. GermanyM. Lombardi, ItalyM. Maccioni, ItalyP. Maranesi, ItalyC. H. Mantakas, GreeceD. Marino, ItalyH. Meyer, BelgiumK. D. Muller, F.R. GermanyJ. G. Ottes, F.R. GermanyA. D. Overtoom, NetherlandsE. C. G. Owen, EnglandL. Panaccione, ItalyM. Patrutescu, Rouman

35、iaR. Patzelt, AustriaA. C. Peatfield, EnglandI. C. Pyle, EnglandB. Rispoli, ItalyM. Sarquiz, FranceW. Schoeps, SwitzerlandR. Schule, F.R. GermanyP. G. Sjolin, SwedenL. Stanchi, ItalyR. Trechcinski, PolandM. Truong, FranceP. Uuspaa, FinlandH. Verweij, SwitzerlandA. J. Vickers, EnglandS. Vitale, Italy

36、M. Vojinovic, YugoslaviaK. Zander, F.R. GermanyD. Zimmermann, F.R. GermanyESONE Executive Group (XG)W. Attwenger, Austria, XG Chair 1980-81H. Meyer, Belgium, Secretary P. Christensen, DenmarkM. Dilcher, F.R. GermanyB. Rispoli, ItalyM. Sarquiz, FranceR. Trechcinski, PolandA. Vickers, EnglandH. Verwei

37、j, SwitzerlandESONE Technical Coordination Committee (TCC)A. C. Peatfield, England, TCC, Chair P. Christensen, Denmark, TCC, Secretary W. Attwenger, AustriaR. Biancastelli, ItalyG. Bianchi, FranceH. Dilcher, F.R. GermanyP. Gallice, FranceW. Kessel, F.R. GermanyJ. Lukacs, HungaryR. Patzelt, AustriaP.

38、 J. Ponting, SwitzerlandW. Schoeps, SwitzerlandS. Vitali, Italy3European Standards on Nuclear Electronics Committee.viiECA/ESONE CAMAC Document Maintenance Study Group (DMSG)P. Gallice, France, Chair R. C. M. Barnes, EnglandL. Besse, SwitzerlandJ. Davis, EnglandF. Iselin, SwitzerlandH. Meyer, Belgiu

39、mH. J. Trebst, F.R. GermanyWhen this standard was approved on September 17, 1981, the IEEE Standards Board had the following membership:I. N. Howell, Jr, Chair Irving Kolodny, Vice Chair Sava I. Sherr, Secretary G. Y. R. AllenJ. J. ArchambaultJ. H. BeallJ. T. BoettgerEdward ChelottiEdward J. CohenLe

40、n S. CoreyJay ForsterKurt GreeneLoering M. JohnsonJoseph L. KoepfingerJ. E. MayDonald T. Michael*J. P. RiganatiF. RosaR. W. SeelbachJ. S. StewartW. E. VannahVirginius N. Vaughan, JrArt WallRobert E. Weiler*Member emeritusCAMAC and NIM Standards and ReportsNOTE Availability of DocumentsANSI Sales Dep

41、artment, American National Standards Institute, 1430 Broadway, New York,NY 10018.IEEE IEEE Service Center, 445 Hoes Lane, Piscataway, New Jersey 08854, USA.IEC International Electrotechnical Commission, 1, rue de Varemb, CH-1211 Geneva 20,Switzerland.DOE and TID Reports National Bureau of Standards,

42、 Washington, D.C. 20234, USA, Attn: L. Costrell.EURATOM Ofce of Ofcial Publications of the European Communitities, P.O. Box 1003,Luxembourg.ESONE Commission of the European Communities, CGR-BCMN, B-2440 GEEL, Belgium,Attn: ESONE Secretariat, H. Meyer.Title IEEE, ANSI Std NoIEC No DOE NoEURATOM(EUR)

43、orESONE NoCAMAC Instrumentation and Interface Standards*This is a hard cover book that contains ANSI/IEEE Std 583-1982 , ANSI/IEEE Std 595-1982 , ANSI/IEEE Std 596-1982 , ANSI/IEEE Std 675-1982 , ANSI/IEEE Std 683-1976 (Reaff 1981), ANSI/IEEE Std 726-1982 and IEEE Std 758-1979 (Reaff 1981), plus int

44、roductory material and aglossary of CAMAC terms.SH08482*(Library of Congress No 8185060) Modular Instrumentation and Digital Interface System (CAMAC)ANSI/IEEE Std 583-1982 516 TID-25875and TID-25877Superseded by corresponding IEEE Standard listed.EUR 4100eSerial Highway Interface System (CAMAC)ANSI/

45、EEE Std 595-1982 640 TID-26488EUR 6100eParallel Highway Interface System (CAMAC)ANSI/IEEE Std 596-1982 552 TID-25876and TID-25877EUR 4600eMultiple Controllers in a CAMAC CrateANSI/IEEE Std 675-1982 729 DOE/EV-0007 EUR 6500eBlock Transfers in CAMAC Systems ANSI/IEEE Std 683-1976 (Reaff 1981)677 TID-2

46、6616EUR 4100 supplAmplitude Analog Signals within a 50 WSystem TID-26614 EUR 5100eThe Definition of IML A Language for Use in CAMAC Systems TID-26615 ESONE/IML/01CAMAC Tutorial Articles TID-26618 Real-Time BASIC for CAMAC ANSI/IEEE Std 726-1982 In preparation.TID-26619ESONE/RTB/03Subroutines for CAM

47、AC ANSI/IEEE Std 758-1979 (Reaff 1981)713 DOE/EV-0016ESONE/SR/01Recommendations for CAMAC Serial Highway Drivers and LAM Graders for the SCC-L2 DOE/EV-0006 ESONE/SD/02Definitions of CAMAC Terms Included in SH08482 678 DOE/ER-0104 ESONE/GEN/01Standard Nuclear Instrument Modules NIM 547Covers only mec

48、hanical features and connector pin assignments.TID-20893 (Rev 4) ixCLAUSE PAGE1. Introduction.12. Interpretation.13. The Auxiliary Controller Bus and Associated Front Panel Signals24. Use of the Lines on the Auxiliary Controller Bus and Associated Signals 84.1 Control Signals. 84.2 Encoded-NSignals.

49、 104.3 Look-at-Me Signals 104.4 Other Signals 105. The Auxiliary Controller Bus Connector and Associated Front Panel Connectors116. Signal Standards136.1 Signal Standards on the ACB. 136.2 Signal Standards for the ACB Associated Front Panel Signals . 146.3 Signal Standards for AC Dataway Connections 146.4 Protection of Critical Signal Inputs 14Annex A (Informative)15Copyright 1982IEEE All Rights Reserved1An American National StandardIEEE Standard Multiple Controllers in a CAMAC Crate1. IntroductionThis standard de