IEEE 692-2013 en Standard Criteria for Security Systems for Nuclear Power Generating Stations《核电站安全系统准则用IEEE标准》.pdf

1、 IEEE Standard for Criteria for Security Systems for Nuclear Power Generating Stations Sponsored by the Nuclear Power Engineering Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Power and Energy SocietyIEEE Std 692-2013(Revision ofIEEE Std 692-2010) IEEE Std 692-2013 (Revision of IEEE

2、Std 692-2010) IEEE Standard for Criteria for Security Systems for Nuclear Power Generating Stations Sponsor Nuclear Power Engineering Committee of the IEEE Power and Energy Society Approved 23 August 2013 IEEE-SA Standards Board Abstract: Criteria for the design of an integrated security system for

3、nuclear power generating stations are provided in this standard. Requirements are included for the overall system, interfaces, subsystems, and individual electrical and electronic equipment. This standard addresses equipment for security-related detection, surveillance, access control, communication

4、 data acquisition, and threat assessment. Keywords: access control, CAS, central alarm station, cyber security, duress alarms, IEEE 692, integrated security system, intrusion detection, line supervision, perimeter intrusion alarm, portal security lighting, remote video surveillance, SAS, secondary

5、alarm station, security lighting, security systems, threat assessment, uninterruptible power supply system, UPS, voice communications The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2013 by The Institute of Electrical and Electronics

6、Engineers, Inc. All rights reserved. Published 30 September 2013. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, I

7、EEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure

8、 purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of th

9、e standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standar

10、ds document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT

11、 INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (IN

12、CLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process involves the review of docum

13、ents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual

14、 shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall

15、make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. Howev

16、er, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests

17、 it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cas

18、es where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the fol

19、lowing address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicab

20、le regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be cons

21、trued as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and

22、use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. Photocopies Subject to payment of t

23、he appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer

24、 Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should b

25、e aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any a

26、mendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly refle

27、ct the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit th

28、e IEEE-SA Website at http:/ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can b

29、e accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered b

30、y patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement

31、 is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions tha

32、t are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for c

33、onducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are ex

34、pressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association. Copyright 2013 IEEE. All rights reserved. vi Participants At the time t

35、his IEEE standard was completed, the Security Systems Working Group had the following membership: David A. Horvath, Chair Thomas M. Worrell, Vice Chair Marie-H. Cuvelier, Secretary Randall H. Flowers Brian B. Linde T. David Mills Paul A. Phelps James E. Vaughn Raymond W. Yeager In addition, the work

36、ing group would like to acknowledge the valuable contributions of Sara E. Seamans and Michael E. Waterman to this revision. Working Group 3.2 would like to acknowledge and commemorate the instrumental and dedicated efforts of our colleague Einar “Bill” Pearson to our working group. We regret his unf

37、ortunate passing in 2011 shortly after this revision was initiated. At the time this standard was balloted, Subcommittee 3 on Operations, Maintenance, Aging, Testing, and Reliability had the following membership: James K. Liming, Chair Yvonne Williams, Vice Chair Tom Crawford, Secretary Gopal Aravap

38、alli George A. Ballassi John Beatty Thomas Carrier Suresh Channarasppa Hamidreza R. Heidarisafa Sharon Honecker David A. Horvath Steven Hutchins Peter J. Kang Jacob Kulangara Robert Lane Singh G. Matharu Kirklyn Melson Joseph Napper Jim Parello Vish Patesh Ted Riccio Glen E. Schinzel Zdenko Simic Re

39、becca Steinman John A. Stevens Yvonne Williams The following members of the individual balloting committee voted on this standard. Balloters may have voted for approval, disapproval, or abstention. William Ackerman Satish Aggarwal Stan Arnot George Ballassi Royce Beacom Robert Beavers H. Stephen Ber

40、ger Wesley Bowers Daniel Brosnan Nissen Burstein Robert Carruth Suresh Channarasappa Keith Chow Alireza Daneshpooy John Disosway Gary Engmann Wells Fargo Stephen Fleger James Gleason Randall Groves Daryl Harmon Hamidreza Heidarisafa Werner Hoelzl David A. Horvath Greg Hostetter Peter Hung Randy Jami

41、son Paul Johnson James Jones Piotr Karocki Chad Kiger Joseph L. Koepfinger Robert Konnik William Lumpkins John MacDonald Faramarz Maghsoodlou Kimberly Mosley Michael S. Newman James Parello vii Copyright 2013 IEEE. All rights reserved. Einar Pearson Ted Riccio Bartien Sayogo Glen Schinzel Sara Seama

42、ns Gil Shultz David Singleton James Smith Robert Stark Rebecca Steinman S. Thamilarasan James Thompson John Vergis Thomas Worrell When the IEEE-SA Standards Board approved this standard on 23 August 2013, it had the following membership: John Kulick, Chair David J. Law, Vice Chair Richard H. Hulett,

43、 Past Chair Konstantinos Karachalios, Secretary Masayuki Ariyoshi Peter Balma Farooq Bari Ted Burse Wael William Diab Stephen Dukes Jean-Philippe Faure Alexander Gelman Mark Halpin Gary Hoffman Paul Houz Jim Hughes Michael Janezic Joseph L. Koepfinger* Oleg Logvinov Ron Petersen Gary Robinson Jon Wa

44、lter Rosdahl Adrian Stephens Peter Sutherland Yatin Trivedi Phil Winston Yu Yuan *Member Emeritus Also included are the following nonvoting IEEE-SA Standards Board liaisons: Richard DeBlasio, DOE Representative Michael Janezic, NIST Representative Catherine Berger IEEE Standards Senior Program Manag

45、er, Document Development Malia Zaman IEEE Standards Program Manager, Technical Program Development viii Copyright 2013 IEEE. All rights reserved. Introduction This introduction is not part of IEEE Std 692-2013, IEEE Standard for Criteria for Security Systems for Nuclear Power Generating Stations. Th

46、e physical protection and security of nuclear power generating stations concerns utilities, manufacturers, the general public, and those who are responsible for licensing and regulating nuclear power generating stations and other nuclear facilities. The International Atomic Energy Agency (IAEA) defi

47、nes nuclear security as “the means and ways of preventing, detecting, and responding to sabotage, theft, and unauthorized access to or illegal transfer of nuclear material and other radioactive substances, as well as their associated facilities.”a“For reactor facilities, the malicious act may target

48、 either systems whose failure would cause core damage, leading to radiological consequences, or areas where nuclear fuel (fresh or spent) or radioactive material is kept or stored.” The requirements for the development of security systems criteria for nuclear power generating stations are emphasized

49、 by international organizations publications such as the Nuclear Security Series from the IAEA. In particular: a) IAEA Nuclear Security Series No. 13 Nuclear Security Recommendations on Physical Protection of Nuclear Material and Nuclear Facilities (INFCIRC/225/Revision 5) B9bprovides “guidance to States and their competent authority on how to develop or enhance, implement and maintain a physical protection regime for nuclear material and nuclear facilities in order to reduce the risk of malicious acts involving that material or those facilities.” b) IAEA Nuclear Secur