IEEE 741-2017 en Criteria for the Protection of Class 1E Power Systems and Equipment in Nuclear Power Generating Stations.pdf

1、IEEE Standard for Criteria for the Protection of Class 1E Power Systems and Equipment in Nuclear Power Generating Stations IEEE Std 741-2017 (Revision of IEEE Std 741-2007) IEEE Power and Energy Society Sponsored by the Nuclear Power Engineering Committee IEEE 3 Park Avenue New York, NY 10016-5997 U

2、SAIEEE Std 741-2017 (Revision of IEEE Std 741-2007) IEEE Standard for Criteria for the Protection of Class 1E Power Systems and Equipment in Nuclear Power Generating Stations Sponsor Nuclear Power Engineering Committee of the IEEE Power and Energy Society Approved 15 June 2017 IEEE-SA Standards Boar

3、dAbstract: Criteria that establish protection requirements for Class 1E power systems and equip- ment are prescribed in this standard. The purpose of and the means for obtaining protection from electrical and mechanical damage, or failures that can occur within a time period that is shorter than tha

4、t required for operator action, are described. Testing and surveillance requirements are includ- ed. Plant physical design requirements to protect against events such as pipe whip, re, dropped load, etc., are not included. Keywords: Class 1E, electrical equipment, IEEE 741, nuclear power generating

5、stations, power systems, protection The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2017 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 31 August 2017. Printed in the United States of Ame

6、rica. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards doc

7、uments are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Fu

8、rthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering pro

9、fessional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care

10、in any given circumstances or, as appropri- ate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY , OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED T

11、O: PROCURE- MENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY , WHETHER IN CON- TRACT, STRICT LIABILITY , OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIA

12、NCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.4 Copyright 2017 IEEE. All rights reserved. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE s

13、tandard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the of

14、ficial position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be con

15、sidered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information

16、or advice pertain- ing to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comment

17、s and questions also receive the concur- rence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordi- nating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been add

18、ressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standard

19、s Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory require- ments. Implementers

20、of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft

21、and approved standards are copyrighted by IEEE under US and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardiza

22、tion, and the pro- motion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents.5 Copyright 2017 IEEE. All rights reserved. Photocopies Subject to payment of

23、 the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Custom

24、er Ser- vice, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents shou

25、ld be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corri- genda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with

26、 any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every 10 years. When a document is more than 10 years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly r

27、eflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visi

28、t the IEEE Xplore at http:/ ieeexplore .ieee .or g/ or contact IEEE at the address listed previously. For more information about the IEEE-SA or IEEEs standards development process, visit the IEEE-SA Website at http:/ standards .ieee .or g. Errata Errata, if any, for all IEEE standards can be accesse

29、d on the IEEE-SA Website at the following URL: http:/ standards .ieee .org/ findstds/ errata/ index .html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by

30、patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement i

31、s listed on the IEEE- SA Website at http:/ standards .ieee .or g/ about/ sasb/ patcom/ patents .html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and condit

32、ions that are demonstrably free of any unfair discrim- ination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not re- sponsible for identifying Essential Patent Claims for which a license may be req

33、uired, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this sta

34、ndard are expressly advised that determination of the valid- ity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association.6 Copyright 2017 IEEE. All rights reserved. Participants A

35、t the time this IEEE standard was completed, the WG-4.7 Working Group had the following membership: Mark Bowman, Chair John Disosway, Vice Chair George Attarian Jason Bellamy Jeri Chadwick Paul Colaianni Nader Eldeiry Kenneth Fleischer Christopher Georgeson Melvin Hess Steven Hutchins Ayodele Ishola

36、-Salawu Wayne Johnson Yoon Kim Hari Kodali Edvin Kozo Jusuf Krvavac Harvey Leake Timothy Lensmire Roy Lyon Tania Martinez Navedo Paul Martini Singh Matharu Kenneth Miller David Pokon Gene Poletto Jim Reddy Gregg Reimers Myat San Thomas Solinsky Robert Stark Hideki Tanaka Sudhir Thakur Tamatha Womack

37、 The Subcommittee on Auxiliary Power (SC4) of the Nuclear Power Engineering Committee that recommended approval of this IEEE standard had the following membership: Keith Bush, Chair Mark Bowman, Vice Chair George Attarian Elnora Basler Duane Brock Robert Carruth Jack Carter Richard Casalaina Paul Co

38、laianni Parthiv Desai John Disosway Nader Eldeiry Kenneth Fleischer Robert Fletcher Christopher Georgeson David Gladey Dale Goodney Evans Heacock Melvin Hess Dirk Hopp Ayodele Ishola-Salawu Yoon Kim Hari Kodali Edvin Kozo Jusuf Krvavac Justin Lane Harvey Leake Bruce Lord Roy Lyon John MacDonald John

39、 Mallanda Singh Matharu Kenneth Miller Gene Poletto Gregg Reimers Bill Roettger Myat San Shawn Simon William Snider Robert Stark Mitchell Staskiewicz Sudhir Thakur Tamatha Womack7 Copyright 2017 IEEE. All rights reserved. At the time this IEEE standard was submitted to the IEEE-SA Standards Board fo

40、r approval, the Nuclear Power Engineering Committee (NPEC) had the following membership: Stephen Fleger, Chair Thomas Koshy, Vice Chair Daryl Harmon, Secretary Satish Aggarwal Ijaz Ahmad George Attarian George Ballassi Royce Beacom Mark Bowman Keith Bush Robert Carruth Jack Carter Suresh Channarasap

41、pa Paul Colaianni Tom Crawford Dennis Dellinger David Desaulniers John Disosway Kenneth Fleisher Robert Fletcher Robert Francis Christopher Georgeson James Gleason Dale Goodney Robert Hall David Herrell Dirk Hopp Greg Hostetter Gary Johnson Christopher Kerr Wolfgang Koenig Robert Konnik James Liming

42、 Bruce Lord John MacDonald Scott Malcom Kenneth Miller Michael H. Miller Edward Mohtashemi Yasushi Nakagawa Warren Odess-Gillett Ted Riccio Mitchell Staskiewicz Rebecca Steinman John Stevens Marek Tengler Sudhir Thakur James Thomas Masafumi Utsumi Michael Waterman John White Yvonne Williams Tamatha

43、Womack Paul L. Yanosy Sr. The following members of the individual balloting committee voted on this standard. Balloters may have voted for approval, disapproval, or abstention. Amber Aboulfaida Satish Aggarwal Robert Atkinson George Ballassi Robert Beavers Jason Bellamy William Bloethe Mark Bowman D

44、uane Brock Daniel Brosnan Nissen Burstein Keith Bush Robert Carruth Suresh Channarasappa Arvind Chaudhary Preston Cooper John Disosway Wells Fargo Stephen Fleger Kenneth Fleischer David Gladey Dale Goodney Randall Groves Ajit Gwal Daryl Harmon Hamidreza Heidarisafa Werner Hoelzl Steven Hutchins Jim

45、Kulchisky G. Lang Benjamin Lanz Michael Lauxman Harvey Leake Timothy Lensmire Bruce Lord Robert Lyon John Macdonald Michael Maddox Michael May Omar Mazzoni Andrew Nack Michael Newman Rajendra Patel Jan Pirrong Robert Stark John Stevens Eugene Stoudenmire John Vergis Kenneth White James Wilson Tamatha Womack Shuhui Zhang