IEEE C37 82-2017 en The Qualification of Switchgear Assemblies for Class 1E Applications in Nuclear Power Generating Stations.pdf

1、IEEE Standard for the Qualification of Switchgear Assemblies for Class 1E Applications in Nuclear Power Generating Stations IEEE Std C37.82-2017 (Revision of IEEE Std C37.82-1987) IEEE Power and Energy Society Sponsored by the Switchgear Committee IEEE 3 Park Avenue New York, NY 10016-5997 USAIEEE S

2、td C37.82-2017 (Revision of IEEE Std C37.82-1987) IEEE Standard for the Qualification of Switchgear Assemblies for Class 1E Applications in Nuclear Power Generating Stations Sponsor Switchgear Committee of the IEEE Power and Energy Society Approved 28 September 2017 IEEE-SA Standards BoardAbstract:

3、The methods and requirements for qualifying switchgear assemblies for indoor areas outside of the containment in nuclear power generating stations are described in this document. These assemblies include: metal-enclosed low-voltage power circuit breaker switchgear assemblies, as de ned in IEEE Std C

4、37.20.1; metal-clad switchgear assemblies, as de ned in IEEE Std C37.20.2; metal-enclosed bus, as de ned in IEEE Std C37.23; and metal-enclosed interrupter switchgear assemblies, as de ned in IEEE Std C37.20.3. Keywords: Class 1E metal-enclosed power switchgear assemblies, design basis event, DBE, I

5、EEE C37.82, quali ed life The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2018 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 2 February 2018. Printed in the United States of America. IEE

6、E is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents ar

7、e supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore

8、, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional

9、 or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any gi

10、ven circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREME

11、NT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STAND

12、ARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE W AS FORESEEABLE.4 Copyright 2018 IEEE. All rights reserved. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is transl

13、ated, only the English version published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position o

14、f IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the perso

15、nal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertain

16、ing to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions als

17、o receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same re

18、ason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane P

19、iscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are respo

20、nsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards ar

21、e copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion

22、 of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents.5 Copyright 2018 IEEE. All rights reserved. Photocopies Subject to payment of the appropriate fee, IEE

23、E will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood

24、Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these docu

25、ments may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda,

26、or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of

27、 the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE Xplore at http:/

28、 ieeexplore .ieee .or g/ or contact IEEE at the address listed previously. For more information about the IEEE-SA or IEEEs standards development process, visit the IEEE-SA Website at http:/ standards .ieee .or g. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at

29、 the following URL: http:/ standards .ieee .org/ findstds/ errata/ index .html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publicati

30、on of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE- SA We

31、bsite at http:/ standards .ieee .or g/ about/ sasb/ patcom/ patents .html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably

32、free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries

33、 into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised tha

34、t determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association.6 Copyright 2018 IEEE. All rights reserved. Participants At the time this standard was comp

35、leted, the SASCIEEE Standard for the Qualification of Switchgear Assemblies for Class 1E Applications in Nuclear Power Working Group had the following membership: Dave Riffe, Chair Larry Connor Michael Flack Amy Rowell Terrance Woodyard The following members of the individual balloting committee vot

36、ed on this standard. Balloters may have voted for approval, disapproval, or abstention. S. Aggarwal Jean-Marc Biasse William Bloethe Gustavo Brunello Paul Cardinal Suresh Channarasappa Gary Donner Edgar Dullni Jerry Earl Douglas J. Edwards Michael Flack Lou Grahor Randall Groves Ajit Gwal Thomas Haw

37、kins Hamidreza Heidarisafa Werner Hoelzl Richard Jackson Yuri Khersonsky Boris Kogan Jim Kulchisky Albert Livshitz Jeffery Mizener Charles Morse Darryl Moser Michael Newman T. W . Olsen Lorraine Padden Bansi Patel K. James Phillips Bartien Sayogo C. Tailor John V ergis John Webb Terry Woodyard Yaowu

38、 Zhang When the IEEE-SA Standards Board approved this standard on 28 September 2017, it had the following membership: Jean-Philippe Faure, Chair Gary Hoffman, Vice Chair John D. Kulick, Past Chair Konstantinos Karachalios, Secretary Chuck Adams Masayuki Ariyoshi Ted Burse Stephen Dukes Doug Edwards

39、J. Travis Griffith Michael Janezic Thomas Koshy Joseph L. Koepfinger* Kevin Lu Daleep Mohla Damir Novosel Ronald C. Petersen Annette D. Reilly Robby Robson Dorothy Stanley Adrian Stephens Mehmet Ulema Phil Wennblom Howard Wolfman Y u Y uan *Member Emeritus7 Copyright 2018 IEEE. All rights reserved.

40、Introduction This introduction is not part of IEEE Std C37.82-2017, IEEE Standard for the Qualification of Switchgear Assemblies for Class 1E Applications in Nuclear Power Generating Stations. This standard complements IEEE Std 323-2003, IEEE Standard for Qualifying Class 1E Equipment for Nuclear Po

41、wer Generating Stations, by providing specific requirements for the qualification of switchgear assemblies for safety-related applications in Nuclear Power Generating Stations. 1This standard is typically used in combination with seismic qualification standards IEEE Std 344 and IEEE Std C37.81 to pe

42、rform a complete qualification program for switchgear assemblies. The primary purpose of this standard is to define the requirements that should take place prior to a seismic qualification program. Significant degradation could occur during the service life of switchgear assemblies; therefore it is

43、important that test samples be in a state of degradation prior to seismic event simulation. IEEE Std 323-2003 provides guidance for evaluating time based aging mechanisms caused by excessive ambient temperatures and /or a radiation environment. Safety-related switchgear assemblies are typically loca

44、ted in mild environments, and are not impacted by these time-based aging mechanisms. Circuit breakers and other switchgear components used in nuclear facilities may be subjected to frequent cycling through testing or routine plant operation. Therefore, a pre-seismic aging program that cycles circuit

45、 breakers and components through endurance testing is typically required. This standard considers that qualified life may be a time interval, operational cycles, or both, whereas IEEE-323-2003 defines qualified life as a time interval. Changes in this standard include adding definitions of Seismic C

46、ategory I and Seismic Category II equipment. Seismic Category I is equivalent to Class 1E. Seismic Category II is for equipment that is not required to function but whose failure could adversely affect the safe shutdown of any Seismic Category I equipment. In approaching the task of developing a sta

47、ndard for these procedures, the authors noted the following: a) Standards for switchgear assemblies have been developed over a long period of time through the efforts of the Institute of Electrical and Electronics Engineers (IEEE), the National Electrical Manufacturers Association (NEMA), and other

48、interested parties under the auspices of the American National Standards Institute (ANSI). b) The switchgear assembly products that have been produced in accordance with these standards and that have been properly manufactured, applied, handled, installed, operated, and maintained, have had long and

49、 successful performance records. c) Because switchgear assemblies are protective equipment, the standards are conservative and provide ample margin with respect to normal application. Design and application also tend to be conservative. d) The application of switchgear assemblies is always outside the containment in a nuclear power generating station. Normal service conditions are not severe. The only unusual requirements sometimes presented are as follows: 1) The need to meet safety-related performance demands during a design basis event (DBE) at any time, up to