IEEE C57 12 00-2015 en General Requirements for Liquid-Immersed Distribution Power and Regulating Transformers《油浸式配电 电力和调压变压器的标准一般要求》.pdf

1、 IEEE Std C57.12.00-2015 (Revision of IEEE Std C57.12.00-2010) IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers Sponsor Transformers Committee of the IEEE Power and Energy Society Approved 5 December 2015 IEEE-SA Standards Board 2 Copyright

2、2016 IEEE. All rights reserved. Abstract: Electrical and mechanical requirements for liquid-immersed distribution and power transformers, and autotransformers and regulating transformers; single-phase and polyphase, with voltages of 601 V or higher in the highest voltage winding, are set forth. This

3、 standard is a basis for the establishment of performance, and limited electrical and mechanical interchangeability requirements of equipment are described; it is also a basis for assistance in the proper selection of such equipment. The requirements in this standard apply to all liquid-immersed dis

4、tribution, power, and regulating transformers except the following: instrument transformers, step voltage and induction voltage regulators, arc furnace transformers, rectifier transformers, specialty transformers, grounding transformers, mobile transformers, and mine transformers. Keywords: autotran

5、sformers, distribution transformers, electrical requirements, IEEE C57.12.00, mechanical requirements, power transformers, regulating transformers xThe Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2016 by The Institute of Electrical an

6、d Electronics Engineers, Inc. All rights reserved. Published 12 May 2016. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In add

7、ition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test,

8、 measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from use

9、rs of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE

10、 Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR AN

11、Y DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR

12、TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process involves the review

13、of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. 4 Copyright 2016 IEEE. All rights reserved. Official statements A statement, written or oral, that is not processed in accordanc

14、e with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an indivi

15、dual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, r

16、egardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE st

17、andards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant r

18、esponse to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group.

19、Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes LanePiscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards

20、 document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with a

21、pplicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include bo

22、th use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to

23、 the documents. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees,

24、please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. 5 Copyright 2016 IEEE. All r

25、ights reserved. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE do

26、cument at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone a revision process, it

27、 is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and

28、whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org/Xplore/home.jsp or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEEs standards development process, visit the IEE

29、E-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the

30、 possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applica

31、nt has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent ri

32、ghts without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not r

33、esponsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in

34、 any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE S

35、tandards Association. Copyright 2016 IEEE. All rights reserved. 6 Participants At the time this IEEE standard was completed, the Continuous Revision of C57.12.00 Working Group had the following membership: Steven Snyder, Chair Stephen Antosz Peter Balma Enrique Betancourt Bruce Forsyth Michael Franc

36、hek Ramsis Girgis Philip Hopkinson Stephen Shull Ed TeNyenhuis David Wallach The following members of the individual balloting committee voted on this standard. Balloters may have voted for approval, disapproval, or abstention. Samuel Aguirre Steven Alexanderson Gregory Anderson Tauhid Haque Ansari

37、Stephen Antosz I. Antweiler Carlo Arpino Javier Arteaga Roberto Asano Donald Ayers Roy Ayers Robert Ballard Peter Balma Thomas Barnes Paul Barnhart William Bartley Christopher Baumgartner Barry Beaster Jeffrey Benach W. J. (Bill) Bergman Enrique Betancourt Steven Bezner Wallace Binder Thomas Bishop

38、Thomas Blackburn Daniel Blaydon William Bloethe W. Boettger Paul Boman Jeffrey Britton Chris Brooks Darren Brown Steven Brown David Buckmaster Carl Bush Thomas Callsen Paul Cardinal Juan Castellanos Donald Cherry Bill Chiu Craig Colopy Jerry Corkran John Crouse William Darovny Alan Darwin Glenn Davi

39、s Larry Dix Dieter Dohnal Gary Donner Randall Dotson Charles Drexler Fred Elliott Keith Ellis James Fairris Michael Faulkenberry Jorge Fernandez Daher Joseph Foldi Bruce Forsyth Marcel Fortin Michael Franchek Fredric Friend George Frimpong Jose Gamboa Robert Ganser Carlos Gaytan Frank Gerleve Ali Gh

40、afourian David Gilmer Ramsis Girgis Jalal Gohari Edwin Goodwin James Graham Randall Groves Bal Gupta Ajit Gwal Said Hachichi John Harley J. Harlow David Harris Jeffrey Hartenberger Roger Hayes Jeffrey Helzer William Henning Joshua Herz Martin Hinow Gary Hoffman Timothy Holdway Thomas Holifield Jill

41、Holmes Philip Hopkinson John Houdek Mohammad Iman Erwin Jauch John John Charles Johnson Laszlo Kadar Gael Kennedy Sheldon Kennedy Vladimir Khalin Gary King Joseph L. Koepfinger Boris Kogan Axel Kraemer Neil Kranich Jim Kulchisky Saumen Kundu John Lackey Chung-Yiu Lam Thomas La Rose Aleksandr Levin M

42、ario Locarno John Luksich Thomas Lundquist Richard Marek J. Dennis Marlow Lee Matthews Omar Mazzoni James McBride John McClelland Mark McNally Susan McNelly Charles McShane Joseph Melanson Tom Melle John Miller Michael Miller Copyright 2016 IEEE. All rights reserved. 7 Michael Miller Daleep Mohla Ch

43、arles Morgan Daniel Mulkey Jerry Murphy Paul Mushill Ali Naderian Jahromi K. R. M. Nair Kris K. Neild Dennis Neitzel Arthur Neubauer Michael Newman Raymond Nicholas Ryan Niemerg Joe Nims Robert Olen T. W. Olson David Ostrander Lorraine Padden Dwight Parkinson Luke Parthemore Bansi Patel Wesley Patte

44、rson Paulette Payne Powell Verena Pellon Brian Penny Mark Perkins Branimir Petosic Christopher Petrola Donald Platts Klaus Pointner Alvaro Portillo Bertrand Poulin Lewis Powell Tom Prevost Jarrod Prince Ulf Radbrandt Martin Rave Jeffrey Ray Timothy Charles Raymond Leslie Recksiedler Jean-Christophe

45、Riboud Johannes Rickmann Pierre Riffon John Roach Diego Robalino Michael Roberts Charles Rogers Oleg Roizman John Rossetti Thomas Rozek Dinesh Sankarakurup Steven Sano Daniel Sauer Roderick Sauls Bartien Sayogo Stephen Schroeder Ewald Schweiger Jeremy Sewell Nikunj Shah Hemchandra Shertukde Stephen

46、Shull Hyeong Sim Charles Simmons Kenneth Skinger Jerry Smith Steve Snyder Sanjib Som Thomas Spitzer Ronald Stahara David Stankes John Sullivan Troy Alan Tanaka Ed TeNyenhuis Malcolm Thaden Juan Thierry James Thompson Robert Thompson Alan Traut Ajith Varghese Roger Verdolin John Vergis Jane Verner Ri

47、chard Vongemmingen Loren Wagenaar David Wallace David Wallach Joe Watson Lee Welch Yingli Wen Kenneth White Roger Wicks Alan Wilks William Wimmer Baitun Yang Jennifer Yu Jian Yu Kipp Yule Shibao Zhang James Ziebarth Waldemar Ziomek Copyright 2016 IEEE. All rights reserved. 8 When the IEEE-SA Standar

48、ds Board approved this standard on 5 December 2015, it had the following membership: John D. Kulick, Chair Jon Walter Rosdahl, Vice Chair Richard H. Hulett, Past Chair Konstantinos Karachalios, Secretary Masayuki Ariyoshi Ted Burse Stephen Dukes Jean-Philippe Faure J. Travis Griffith Gary Hoffman Mi

49、chael Janezic Joseph L. Koepfinger* David J. Law Hung Ling Andrew Myles T. W. Olsen Glenn Parsons Ronald C. Petersen Annette D. Reilly Stephen J. Shellhammer Adrian P. Stephens Yatin Trivedi Phillip Winston Don Wright Yu Yuan Daidi Zhong *Member Emeritus 9 Copyright 2016 IEEE. All rights reserved. Introduction This introduction is not part of IEEE Std C57.12.00-2015, IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers. This standard is a voluntary consensus standard. Its use may become mandatory only when required