IEEE C63 26-2015 en American National Standard for Compliance Testing of Transmitters Used in Licensed Radio Services.pdf

1、ANSI C63.26-2015 American National Standard for Compliance Testing of Transmitters Used in Licensed Radio Services Accredited Standards Committee C63Electromagnetic Compatibility accredited by the American National Standards Institute Secretariat Institute of Electrical and Electronics Engineers, In

2、c. Approved 11 December 2015 American National Standards Institute Abstract: This standard is intended to cover procedures for compliance testing of a wide variety of transmitters designed to operate in licensed radio services, including but not limited to: Commercial Mobile Radio Services, Public M

3、obile Services, Cellular Radiotelephone Service, Personal Communication Services, Miscellaneous Wireless Communication Services, Private Land Mobile Radio Services, and Personal Radio Services. Tests methods are provided for measurement of radiated and conducted emissions, RF power, out-of-band emis

4、sions, frequency stability, and other regulatory requirements for a variety of devices. This standard does not consider test methods for requirements specific to maritime and aviation transmitters, ground-based radars, satellite equipment, fixed microwave equipment, or broadcast transmitters. The la

5、tter equipment may be covered in future revisions of this standard. Keywords: ANSI C63.26, compliance testing, frequency stability, licensed radio services, licensed transmitters, out-of-band emissions, radiated and conducted emissions, RF power, test procedures The Institute of Electrical and Elect

6、ronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2016 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 15 January 2016. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent (978) 750-8400.

7、Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Errata Users are encouraged to check the IEEE Errata URL (http:/standards.ieee.org/findstds/errata/index.html), and the one for ASC C63at (http:/www.

8、c63.org/explanations_interpretations_request.htm), for errata periodically. Interpretations (ASC C63standards) Current interpretations are essential to the understanding of all ASC C63standards. To assist in the meanings of requirements, informative interpretations are available at the following URL

9、: (http:/www.c63.org/standards_development.htm). Users are cautioned that, although interpretations do not and can not change the requirements of a standard, they serve to clarify the meanings of requirements. All interpretations are informative rather than normative, until such time as the standard

10、 is revised (consistent with ASC C63ANSI-accredited operating procedures) to incorporate the interpretation as a normative requirement. Important Notices and Disclaimers Concerning IEEE Standards Documents IEEE documents are made available for use subject to important notices and legal disclaimers.

11、These notices and disclaimers, or a reference to this page, appear in all standards and may be found under the heading “Important Notice” or “Important Notices and Disclaimers Concerning IEEE Standards Documents.” Notice and Disclaimer of Liability Concerning the Use of IEEE Standards Documents IEEE

12、 Standards documents (standards, recommended practices, and guides), both full-use and trial-use, are developed within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (“IEEE-SA”) Standards Board. IEEE (“the Institute”) develops its standards through a conse

13、nsus development process, approved by the American National Standards Institute (“ANSI”), which brings together volunteers representing varied viewpoints and interests to achieve the final product. Volunteers are not necessarily members of the Institute and participate without compensation from IEEE

14、. While IEEE administers the process and establishes rules to promote fairness in the consensus development process, IEEE does not independently evaluate, test, or verify the accuracy of any of the information or the soundness of any judgments contained in its standards. IEEE does not warrant or rep

15、resent the accuracy or content of the material contained in its standards, and expressly disclaims all warranties (express, implied and statutory) not included in this or any other document relating to the standard, including, but not limited to, the warranties of: merchantability; fitness for a par

16、ticular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standar

17、d is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and

18、 issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity no

19、r is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a compe

20、tent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFIT

21、S; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGAR

22、DLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official s

23、tatements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position o

24、f IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for rev

25、ision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed ch

26、ange of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies

27、and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revision

28、s to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable

29、 laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publicati

30、on of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are a

31、dopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public au

32、thorities and private users, IEEE does not waive any rights in copyright to the documents. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or indi

33、vidual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be ob

34、tained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda,

35、 or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not u

36、ndergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given docum

37、ent is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEEs standards d

38、evelopment process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. P

39、atents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If

40、a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling

41、to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not

42、 been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a L

43、etter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further informatio

44、n may be obtained from the IEEE Standards Association. vii Copyright 2016 IEEE. All rights reserved. Participants At the time this standard was published, Accredited Standards Committee C63Electromagnetic Compatibility had the following membership: Daniel Hoolihan, Chair Dan Sigouin, Vice Chair Jerr

45、y D. Ramie, Secretary Sue Vogel, Secretariat Organization Represented Name of Representative Alcatel-Lucent Dheena Moongilan American Council of Independent Laboratories (ACIL) . Harry H. Hodes . John Repella (Alt.) American Radio Relay League (ARRL) Edward F. Hare . Kermit Carlson (Alt.) Apple, Inc

46、. Manjit Walia Indrandil Sen (Alt.) Blackberry Corporation . Masud Attayi Daoud Attayi (Alt.) Bureau Veritas . Jonathan Stewart Cisco Systems . Andy Griffin Dave Case (Alt.) Dell Inc. . Richard Worley ETS-Lindgren Zhong Chen Michael Foegelle (Alt.) Federal Communications Commission (FCC) William Hur

47、st Steven Jones (Alt.) Food and Drug Administration (FDA) Jeffrey L. Silberberg Donald M. Witters (Alt.) Industry Canada . Jason Nixon . Horia Popovici (Alt.) Information Technology Industry Council (ITIC) John Hirvela . Joshua Rosenberg (Alt.) IEEE-Electromagnetic Compatibility Society (EMCS) . Joh

48、n Norgard Henry Benitez (Alt.) Liberty Labs Mike Howard Brandt Langer (Alt.) Motorola Mobility Tom Knipple Motorola Solutions Deanna Zakharia National Institute of Standards and Technology (NIST) . William Young Jason Coder (Alt.) Northwest EMC Dean Ghizzone . Greg Kiemel (Alt.) PCTEST Engineering L

49、aboratory Greg Snyder Dennis Ward (Alt.) Qualcomm Technologies, Inc. John Forrester Mark Klerer (Alt.) Society of Automotive Engineers (SAE) . Poul Andersen . Gary Fenical (Alt.) Telecommunication Certification Body (TCB) Council Art Wall William Stumpf (Alt.) Telecommunications Industry Association (TIA) . Stephen Whitesell TUV SUD America, Inc. David Schaefer . Derek Lilla (Alt.) viii Copyright 2016 IEEE. All rights reserved. Underwriters Laboratories (UL) . Robert DeLisi . Jeffery Moser (Alt.) U.S. Department of DefenseJoint