IEEE C63 27-2017 en American National Standard for Evaluation of Wireless Coexistence《无线共存评估用美国国家标准》.pdf

1、 American National Standard for Evaluation of Wireless Coexistence Accredited by the American National Standards Institute IEEE 3 Park Avenue New York, NY 10016-5997 USA Accredited Standards Committee C63Electromagnetic Compatibility ANSI C63.27-2017 C63ANSI C63.27-2017 American National Standard fo

2、r Evaluation of Wireless Coexistence Accredited Standards Committee C63Electromagnetic Compatibility accredited by the American National Standards Institute Secretariat Institute of Electrical and Electronics Engineers, Inc. Approved 31 January 2017 American National Standards Institute 2 Copyright

3、2017 IEEE. All rights reserved. Abstract: An evaluation process and supporting test methods are provided in this standard to quantify the ability of a wireless device to coexist with other wireless services in its intended radio frequency (RF) environments. Keywords: ANSI C63.27, coexistence, electr

4、omagnetic environments, EMI, immunity, interference, reliability, RF, RFI, susceptibility The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2017 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Publish

5、ed 11 May 2017. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent (978) 750-8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Errata Users are encourage

6、d to check the IEEE Errata URL (http:/standards.ieee.org/findstds/errata/index.html), and the one for ASC C63at http:/www.c63.org/explanations_interpretations_request.htm, for errata periodically. Interpretations (ASC C63standards) Current interpretations are essential to the understanding of all AS

7、C C63standards. To assist in the meanings of requirements, informative interpretations are available at the following URL: http:/www.c63.org/documents/misc/posting/new_interpretations.htm. Users are cautioned that, although interpretations do not and cannot change the requirements of a standard, the

8、y serve to clarify the meanings of requirements. All interpretations are informative rather than normative, until such time as the standard is revised (consistent with ASC C63ANSI-accredited operating procedures) to incorporate the interpretation as a normative requirement. 4 Copyright 2017 IEEE. Al

9、l rights reserved. Important Notices and Disclaimers Concerning IEEE Standards Documents IEEE documents are made available for use subject to important notices and legal disclaimers. These notices and disclaimers, or a reference to this page, appear in all standards and may be found under the headin

10、g “Important Notices and Disclaimers Concerning IEEE Standards Documents.” They can also be obtained on request from IEEE or viewed at http:/standards.ieee.org/IPR/disclaimers.html. Notice and Disclaimer of Liability Concerning the Use of IEEE Standards Documents IEEE Standards documents (standards,

11、 recommended practices, and guides), both full-use and trial-use, are developed within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (“IEEE-SA”) Standards Board. IEEE (“the Institute”) develops its standards through a consensus development process, approv

12、ed by the American National Standards Institute (“ANSI”), which brings together volunteers representing varied viewpoints and interests to achieve the final product. IEEE Standards are documents developed through scientific, academic, and industry-based technical working groups. Volunteers in IEEE w

13、orking groups are not necessarily members of the Institute and participate without compensation from IEEE. While IEEE administers the process and establishes rules to promote fairness in the consensus development process, IEEE does not independently evaluate, test, or verify the accuracy of any of t

14、he information or the soundness of any judgments contained in its standards. IEEE Standards do not guarantee or ensure safety, security, health, or environmental protection, or ensure against interference with or from other devices or networks. Implementers and users of IEEE Standards documents are

15、responsible for determining and complying with all appropriate safety, security, environmental, health, and interference protection practices and all applicable laws and regulations. IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and expressly

16、disclaims all warranties (express, implied and statutory) not included in this or any other document relating to the standard, including, but not limited to, the warranties of: merchantability; fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or com

17、pleteness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no

18、 other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art a

19、nd comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another.

20、Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVEN

21、T SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CO

22、NTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. 5 Copyright 2017 IEEE. All rights reserved.

23、 Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or oral, that

24、is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or e

25、ducational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome

26、 from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate suppo

27、rting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not

28、 able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the

29、relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the pr

30、ovisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action th

31、at is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and

32、private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not wa

33、ive any rights in copyright to the documents. 6 Copyright 2017 IEEE. All rights reserved. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or indiv

34、idual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obt

35、ained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda,

36、or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not un

37、dergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given docume

38、nt is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE Xplore at http:/ieeexplore.ieee.org/ or contact IEEE at the address listed previously. For more information about the IEEE-SA or IEEEs standards development process, vi

39、sit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is ca

40、lled to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or pat

41、ent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses unde

42、r patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IE

43、EE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if

44、 any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from

45、 the IEEE Standards Association. 7 Copyright 2017 IEEE. All rights reserved. Participants At the time this standard was completed, the Accredited Standards Committee on Electromagnetic Compatibility, C63, had the following membership: Daniel Hoolihan, Chair Dan Sigouin, Vice Chair Gerald D. Ramie, S

46、ecretary Sue Vogel, Secretariat Organization Represented Name of Representative Advanced Compliance Solutions . William Elliott . Sam Wismer (Alt.) American Council of Independent Laboratories (ACIL) . Richard Reitz American Radio Relay League (ARRL) Edward F. Hare . Kermit Carlson (Alt.) Apple, Inc

47、. Jyun-Cheng Chen Michael ODwyer (Alt.) Bay Area Compliance Laboratories Corporation . Harry H. Hodes . Lisa Tang (Alt.) Bureau Veritas . Jonathan Stewart Yunus Faziloglu Cisco Systems . Andy Griffin Dave Case (Alt.) Dell Inc. . Richard Worley Element Materials Technology . Greg Kiemel Jeremiah Dard

48、en Ericsson AB . Vladimir Bazhanov . Kenth Skoglund (Alt.) ETS-Lindgren Zhong Chen . Doug Kramer (Alt.) Federal Communications Commission (FCC) . Steve Jones (Alt.) Food and Drug Administration (FDA) Jeffrey L. Silberberg Donald M. Witters (Alt.) Hearing Industry Association . John Becker . Dave Pre

49、ves (Alt.) Innovation, Science and Economic Development (ISED) Canada . Jason Nixon . Horia Popovici (Alt.) Information Technology Industry Council (ITIC) John Hirvela . Joshua Rosenberg (Alt.) IEEE Electromagnetic Compatibility Society (EMCS) John Norgard Henry Benitez Liberty Labs Mike Howard . Nate Potts (Alt.) Motorola Mobility Tom Knipple Motorola Solutions Deanna Zakharia National Institute of Standards and Technology (NIST) . William Young Jason Coder (Alt.) Nokia Dheena Moongilan PCTEST Engineering Laboratory . Greg Snyder Dennis Ward (Alt.) Qualcomm Tec