IEEE P802 3BS D3 5-2017 en Ethernet (IEEE Computer Society).pdf

1、1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 541IEEE P802.3bs/D3.5, 10th October 2017(Amendment of IEEE Std 802.3-2015 as amended by list to be populated during publication process) IEEE P802.3bs

2、/D3.5Draft Standard for EthernetAmendment 10:Media Access Control Parameters, Physical Layers and Management Parameters for 200 Gb/s and 400 Gb/s OperationPrepared by the LAN/MAN Standards Committeeof theIEEE Computer SocietyThis draft is an amendment of IEEE Std 802.3-2015 as amended by IEEE Std 80

3、2.3bw-2015, IEEE Std 802.3by-2016, IEEE Std 802.3bq-2016, IEEE Std 802.3bp-2016, IEEE Std 802.3br-2016, IEEE Std 802.3bn-2016, IEEE Std 802.3bz-2016, IEEE Std 802.3bu-2016, IEEE Std 802.3bv-2017, and IEEE Std 802.3-2015/Cor 1-2017. This amendment defines IEEE 802.3 Media Access Control (MAC) paramet

4、ers, Physical Layer specifications, and management parameters for the transfer of IEEE 802.3 format frames at 200 Gb/s and 400 Gb/s. Draft D3.5 is prepared for Sponsor ballot recirculation. This draft expires 6 months after the date of publication or when the next version is published, whichever com

5、es first.Copyright 2017 by The Institute of Electrical and Electronics Engineers, Inc.Three Park AvenueNew York, New York 10016-5997, USAAll rights reserved.This document is an unapproved draft of a proposed IEEE Standard. As such, this document is subject to change. USE AT YOUR OWN RISK! IEEE copyr

6、ight statements SHALL NOT BE REMOVED from draft or approved IEEE standards, or modified in any way. Because this is an unapproved draft, this document must not be utilized for any conformance/compliance purposes. Permission is hereby granted for officers from each IEEE Standards Working Group or Com

7、mittee to reproduce the draft document developed by that Working Group for purposes of standardization consideration by ISO/IEC. IEEE Standards Department must be informed of the submission for consideration prior to any reproduction (stds.iprieee.org). Prior to adoption of this document, in whole o

8、r in part, by another standards development organization, permission must first be obtained from the IEEE Standards Department (stds.iprieee.org). When requesting permis-sion, IEEE Standards Department will require a copy of the standard development organizations document highlighting the use of IEE

9、E content. Other entities seeking permission to reproduce this document, in whole or in part, must also obtain permission from the IEEE Standards Department.IEEE Standards Department445 Hoes LanePiscataway, NJ 08854, USAAPPROVED DRAFTThe Institute of Electrical and Electronics Engineers, Inc.3 Park

10、Avenue, New York, NY 10016-5997, USACopyright 2017 by the Institute of Electrical and Electronics Engineers, Inc.All rights reserved. Published xx Month 201x. Printed in the United States of America.IEEE and 802 are registered trademarks in the U.S. Patent fitness for a particular purpose; non-infri

11、ngement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.”Use of an IEEE standard is wholly voluntary. The

12、existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to chang

13、e brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to pe

14、rform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determ

15、ining the appropriateness of a given IEEE standard.IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR Editors Note (to be re

16、moved prior to publication): This front matter is provided for comment only. Front matter is not part of a published standard and is therefore, not part of the draft standard. You are invited to review and comment on it as it will be included in the published standard after approval.One exception to

17、 IEEE style that is consciously used to simplify the balloting process is the numbering of the front matter. Instead of the front matter being lower case Roman numeral page numbers, with the draft restarting at 1 with Arabic page numbers, balloted front matter and draft are numbered consecutively wi

18、th Arabic page numbers. APPROVED DRAFTDraft Amendment to IEEE Std 802.3-2015 IEEE Draft P802.3bs/D3.5IEEE P802.3bs 200 Gb/s and 400 Gb/s Ethernet Task Force 10th October 2017Copyright 2017 IEEE. All rights reserved.This is an unapproved IEEE Standards draft, subject to change.41 2 3 4 5 6 7 8 9 10 1

19、1 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WA

20、Y OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE sta

21、ndard is translated, only the English version published by IEEE should be considered the approved IEEE standard.Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the offic

22、ial position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be consid

23、ered the personal views of that individual rather than the formal position of IEEE. Comments on standardsComments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or a

24、dvice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and

25、questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. Fo

26、r the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group.Comments on standards should be submitted to the following address:Secretary, IEEE-SA Standards Board 445

27、Hoes Lane Piscataway, NJ 08854 USALaws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard

28、 are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so.APPROVED DRAFTDraft Amendment to IEEE

29、Std 802.3-2015 IEEE Draft P802.3bs/D3.5IEEE P802.3bs 200 Gb/s and 400 Gb/s Ethernet Task Force 10th October 2017Copyright 2017 IEEE. All rights reserved.This is an unapproved IEEE Standards draft, subject to change.51 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

30、32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both

31、 use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to t

32、he documents.Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, ple

33、ase contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center.Updating of IEEE Standards docum

34、ents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the curr

35、ent edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, al

36、though still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard.In order to determine whether a given document is the current edition and whether it has been amended through the issuance

37、of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org.Errata

38、 Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically.PatentsAttention is called to the possibility that implementation of this standard

39、may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accep

40、ted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or APPROVED DRAFTDraft A

41、mendment to IEEE Std 802.3-2015 IEEE Draft P802.3bs/D3.5IEEE P802.3bs 200 Gb/s and 400 Gb/s Ethernet Task Force 10th October 2017Copyright 2017 IEEE. All rights reserved.This is an unapproved IEEE Standards draft, subject to change.61 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 2

42、6 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses.Essential Patent Claims may exist for which a Lette

43、r of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection

44、with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibili

45、ty. Further information may be obtained from the IEEE Standards Association.APPROVED DRAFTDraft Amendment to IEEE Std 802.3-2015 IEEE Draft P802.3bs/D3.5IEEE P802.3bs 200 Gb/s and 400 Gb/s Ethernet Task Force 10th October 2017Copyright 2017 IEEE. All rights reserved.This is an unapproved IEEE Standa

46、rds draft, subject to change.71 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54ParticipantsThe following individuals were officers and members of the IEEE 802.3 working group at the beginning of th

47、e IEEE P802.3bs working group ballot. Individuals may have not voted, voted for approval, disapproval or abstained on this standard.David J. Law, IEEE 802.3 Working Group ChairAdam Healey, IEEE 802.3 Working Group Vice-ChairPete Anslow, IEEE 802.3 Working Group SecretarySteven B. Carlson, IEEE 802.3

48、 Working Group Executive SecretaryValerie Maguire, IEEE 802.3 Working Group TreasurerJohn DAmbrosia, IEEE P802.3bs 200 Gb/s and 400 Gb/s Ethernet Task Force ChairPete Anslow, IEEE P802.3bs 200 Gb/s and 400 Gb/s Ethernet Task Force Editor-in-ChiefMark Gustlin, IEEE P802.3bs 200 Gb/s and 400 Gb/s Ethe

49、rnet Task Force Editor for Clauses 117, 118, 119, Annex 119ASteve Trowbridge, IEEE P802.3bs 200 Gb/s and 400 Gb/s Ethernet Task Force Editor for Clause 120, Annex 120APeter Stassar, IEEE P802.3bs 200 Gb/s and 400 Gb/s Ethernet Task Force Editor for Clauses 121, 122, 124Jonathan King1, IEEE P802.3bs 200 Gb/s and 400 Gb/s Ethernet Task Force Editor for Clause 123Andre Szczepanek, IEEE P802.3bs 200 Gb/s and 400 Gb/s Ethernet Task Force Editor for Annexes 120D, 120E1Not a member of the IEEE 802.3 working group at the beginning of the working group ballo