ISO 10245-2 AMD 1-2015 Cranes - Limiting and indicating devices - Part 2 Mobile cranes Amendment 1《起重机 限定及指示设备 第2部分 移动式起重机 修改件1》.pdf

1、 ISO 2015 Cranes Limiting and indicating devices Part 2: Mobile cranes AMENDMENT 1 Appareils de levage charge suspendue Limiteurs et indicateurs Partie 2: Grues mobiles AMENDEMENT 1 INTERNATIONAL STANDARD ISO 10245-2 Second edition 2014-02-15 Reference number ISO 10245-2:2014/Amd.1:2015(E) AMENDMENT

2、 1 2015-07-15 ISO 10245-2:2014/Amd.1:2015(E)ii ISO 2015 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO 2015, Published in Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or

3、mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Gene

4、va, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.orgISO 10245-2:2014/Amd.1:2015(E) ISO 2015 All rights reserved iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The wor

5、k of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governme

6、ntal, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The m

7、ain task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. A

8、ttention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Amendment 1 to ISO 10245-2:2014 was prepared by Technical Committee ISO/TC 96, Crane, Subcommittee SC

9、6, Mobile Cranes. FINAL DRAFT AMENDMENT ISO 10245-2:2014/A md.1:2015(E) ISO 2015 All rights reserved 1 Cranes Limiting and indicating devices Part 2: Mobile cranes AMENDMENT 1 Modification 1 of Chapter Scope after paragraph 1 and add a new note (NOTE 1) as follows: FROM: This part of ISO 10245 appli

10、es to all mobile cranes as defined in ISO 4306-2. See 4.1 and also 4.2. NOTE Some basic machine types such machines when used as lifting cranes. TO: This part of ISO 10245 applies to all mobile cranes as defined in ISO 4306-2 except loader cranes. NOTE 1 Requirements for Loader Cranes are defined in

11、 ISO 15442 clause 4.6. NOTE 2 Some basic machine types such machines when used as lifting cranes. Modification 2 of Terms and Definitions; add new Definition of Mobile Cranes as follows: 3.4 Mobile Cranes Equipment as defined in ISO 4306-2 except loader cranes. ISO 10245-2:2014/Amd.1:2015(E) ISO 2015 All rights reserved IC S 53.020.20 Price based on 1 page