ISO 15745-4 AMD 1-2006 Industrial automation systems and integration - Open systems application integration framework - Part 4 Reference description for Etherne.pdf

1、 Reference number ISO 15745-4:2003/Amd.1:2006(E) ISO 2006INTERNATIONAL STANDARD ISO 15745-4 First edition 2003-03-01 AMENDMENT 1 2006-02-15 Industrial automation systems and integration Open systems application integration framework Part 4: Reference description for Ethernet-based control systems AM

2、ENDMENT 1: PROFINET profiles Systmes dautomatisation industrielle et intgration Cadres dintgration dapplication pour les systmes ouverts Partie 4: Description de rfrence pour les systmes de contrle fonds sur Ethernet AMENDEMENT 1: Profils pour PROFINET ISO 15745-4:2003/Amd.1:2006(E) PDF disclaimer T

3、his PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept t

4、herein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file;

5、 the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO 2006 All rights re

6、served. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requ

7、ester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2006 All rights reservedISO 15745-4:2003/Amd.1:2006(E) ISO 2006 All rights reserved iii Foreword ISO (the International O

8、rganization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been estab

9、lished has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardizat

10、ion. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting

11、. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such p

12、atent rights. Amendment to ISO 15745-4: was prepared by Technical Committee ISO/TC 184, Industrial automation systems and integration, Subcommittee SC 5, Architecture, communications and integration frameworks. This amendment to ISO 15745-4:2003 specifies profiles for PROFINET 1)and, as such, adds t

13、o the number of technology-specific elements and rules in ISO 15745-4 for describing both communication network profiles and communication-related aspects of device profiles, thus further extending the Application Integration Framework described in ISO 15745-1. 1) PROFINET is a trade name of PROFIBU

14、S International (PI). This information is given for the convenience of users of ISO 15745 and does not constitute an endorsement by ISO of the trademark holder or any of its products. Compliance to this profile does not require use of the trade name PROFINET. Use of the trade name PROFINET requires

15、permission of PROFIBUS International. ISO 2006 All rights reserved 1Page 1, clause 2 Add the following normative references: “ISO 639-1:2002, Codes for the representation of names of languages Part 1: Alpha-2 code “ISO 15745-3:2003, Industrial automation systems and integration Open systems applicat

16、ion integration framework Part 3: Reference description for IEC 61158-based control systems “ISO/IEC 11578:1996, Information technology - Open Systems Interconnection - Remote Procedure Call (RPC) “REC-svg-20030114, Scalable Vector Graphics (SVG) 1.1 Specification W3C Recommendation 14 January 2003,

17、 available at “REC-xpath-19991116, XML Path Language (XPath) Version 1.0 W3C Recommendation 16 November 1999 “RFC 1101:1989, DNS encoding of network names and other types Internet Engineering Task Force (IETF), Request for Comments (RFC) “RFC 2131:1997, Dynamic Host Configuration Protocol Internet E

18、ngineering Task Force (IETF), Request for Comments (RFC)“ Page 2, clause 4 Add the following abbreviated terms: “DAP Device Access Point “DNS Domain Name System (see RFC 1101) “GSD Generic Station Description “GSDML Generic Station Description Markup Language “ID Identification “IO Input/Output “PDU

19、 Protocol Data Unit “SVG Scalable Vector Graphics (see REC-svg-20030114) “URL Uniform Resource Locator ISO 15745-4:2003/Amd.1:2006(E) Industrial automation systems and integration Open systemsapplication integration framework Part 4: Reference description for Ethernet-based control systems AMENDMENT

20、 1: PROFINET profiles 2 ISO 2006 All rights reserved“UUID Universally Unique Identifier (see ISO/IEC 11578) “W3C World Wide Web Consortium“ Page 3, subclause 5.2.2 In the second sentence of the second paragraph, replace “(Annex A to Annex C)“ with “(see annexes).“ Page 4, Table 1 Add a row with the

21、entries “GSDML“ under the “ProfileTechnology name“ column and “PROFINET“ under the “Technology“ column. Page 4, subclause 5.3 Add a fourth list item in the first paragraph to read “ PROFINET (see 6.4).“ In the second paragraph, replace “Annex A to Annex C.“ with “the annexes.“ Page 18 Insert the fol

22、lowing new subclause 6.4 before Annex A. 6.4 PROFINET 6.4.1 General NOTE In addition to the UML terminology and notation in ISO 15745-1:2003, Annex A, the following diagrams make use of the multiplicity notation (UML V1.4). The multiplicity of an attribute is displayed in squared brackets. 6.4.2 Dev

23、ice profile 6.4.2.1 General Figure 11 shows the class structure of a GSDML device profile. DeviceProfile DeviceIdentity ApplicationProcess 1 0* DeviceFunction 1*Figure 11 GSDML device profile class diagram The XML schema representing the GSDML device profile template is defined in D.5.2. The profile

24、 header of the GSDML device profile shall have the following content: PROFINET Device Profile 1.00 Device Profile for PROFINET Devices PROFIBUS Nutzerorganisation e. V. (PNO) ISO 15745-4:2003/Amd.1:2006(E) ISO 2006 All rights reserved 3Device 4 1 GSDML 6.4.2.2 Device identity Figure 12 shows the str

25、ucture of the DeviceIdentity class. VendorID DeviceID DeviceIdentity TextId1 InfoText 1 Value1 VendorName 1Figure 12 DeviceIdentity class diagram Attributes and semantics of the classes are defined in D.4.2. 6.4.2.3 Device function Figure 13 shows the structure of the DeviceFunction class. MainFamil

26、y1 ProductFamily01 Family 1 DeviceFunctionFigure 13 DeviceFunction class diagram Attributes and semantics of the classes are defined in D.4.3. ISO 15745-4:2003/Amd.1:2006(E) 4 ISO 2006 All rights reserved6.4.2.4 Application process 6.4.2.4.1 General Figure 14 describes the structure of the Applicati

27、onProcess element. UML classes without an attribute field are detailed in a separate diagram. Attributes and semantics of the classes are defined in D.4.4. ApplicationProcess DeviceAccessPointList 1 ModuleList 1 ValueList 01 ChannelDiagList 01 UnitDiagTypeList 01 CategoryList 01 DeviceAccessPointIte

28、m 1* ID1 ModuleIdentNumber1 ModuleItem 1* 1 VirtualSubmoduleList 1 VirtualSubmoduleItem 1 Graphics 01 Type1 GraphicItemTarget1 GraphicItemRef 1* ID1 ValueItem Content1 TextId1 Assign 1* 01 1* ErrorType1 ChannelDiagItem 1* 1 UserStructureIdentifier1 UnitDiagTypeItem 1* ValueItemTarget01 ByteOffset1 B

29、itOffset01 BitLength01 DataType1 DefaultValue1 AllowedValues01 Changeable01 Visible01 TextId1 Ref 1* GraphicsList 01 ID1 GraphicFile1 GraphicItem 1* Embedded 01 ID1 TextId1 CategoryItem 1* ModuleInfo A) TextId1 Help 01 Assignments TextId1 Name TextId1 Help 01 A) A) ExternalTextList xml:lang1 Languag

30、e TextId1 Value1 Text 1* 0* PrimaryLanguage TextId1 Value1 Text 1* 1 1ISO 15745-4:2003/Amd.1:2006(E) ISO 2006 All rights reserved 5A)see subdiagram for details Figure 14 PROFINET ApplicationProcess class diagram 6.4.2.4.2 DeviceAccessPointItem Figure 15 describes the structure of the DeviceAccessPoi

31、ntItem element. UML classes without an attribute field are explained in a separate diagram in detail. Attributes and semantics of the classes are defined in D.4.5. ID1 PhysicalSlots1 ModuleIdentNumber1 MinDeviceInterval1 DNS_CompatibleName1 AllowedInSlots01 FixedInSlots1 ObjectUUID_LocalIndex1 Imple

32、mentationType01 ExtendedAddressAssignmentSupported01 DeviceAccessPointItem ModuleInfo 1 MaxInputLength1 MaxOutputLength1 MaxDataLength01 IOConfigData 1 UseableModules 1 ModuleItemTarget1 AllowedInSlots01 UsedInSlots01 FixedInSlots01 ModuleItemRef 1* VirtualSubmoduleList 1 VirtualSubmoduleItem 1 Grap

33、hics 01 Type1 GraphicItemTarget1 GraphicItemRef 1* AR_BlockVersion1 IOCR_BlockVersion1 AlarmCR_BlockVersion1 SubmoduleDataBlockVersion1 ApplicationRelations SendClock01 ReductionRatio01 TimingProperties 01 01 A) A)A)see subdiagram for details Figure 15 PROFINET DeviceAccessPointItem class diagram 6.

34、4.2.4.3 VirtualSubmoduleItem Figure 16 describes the structure of the VirtualSubmoduleItem element. UML classes without an attribute field are explained in a separate diagram in detail. Attributes and semantics of the classes are defined in D.4.6. ISO 15745-4:2003/Amd.1:2006(E) 6 ISO 2006 All rights

35、 reservedID1 SubmoduleIdentNumber1 VirtualSubmoduleItem IOPS_Length01 IOCS_Length01 IOData RecordDataList ModuleInfo Graphics Type1 GraphicItemTarget1 GraphicItemRef 1* 1 01 01 01 Consistency01 Input Consistency01 Output 01 01 DataType1 Length01 UseAsBits01 TextId1 DataItem DataType1 Length01 UseAsB

36、its01 TextId1 DataItem 1* 1* A) A)A)see subdiagram for details Figure 16 PROFINET VirtualSubmoduleItem class diagram 6.4.2.4.4 RecordDataList Figure 17 describes the structure of the RecordDataList element. Attributes and semantics of the classes are defined in D.4.7. RecordDataList 0* Index1 Length

37、1 TransferSequence01 ParameterRecordDataItem 1 ValueItemTarget01 ByteOffset1 BitOffset01 BitLength01 DataType1 DefaultValue1 AllowedValues01 Changeable01 Visible01 TextId1 Ref 0* ByteOffset01 Data1 Const 0* TextId1 NameFigure 17 PROFINET RecordDataList class diagram ISO 15745-4:2003/Amd.1:2006(E) IS

38、O 2006 All rights reserved 76.4.2.4.5 ModuleInfo Figure 18 describes the structure of the ModuleInfo element. Attributes and semantics of the classes are defined in D.4.8. CategoryRef01 SubCategory1Ref01 ModuleInfo 1 Value1 OrderNumber 01 Value1 SoftwareRelease 01 Value1 HardwareRelease 01 Value1 Ve

39、ndorName 01 1 TextId1 InfoText TextId1 Name MainFamily1 ProductFamily01 Family 01Figure 18 PROFINET ModuleInfo class diagram ISO 15745-4:2003/Amd.1:2006(E) 8 ISO 2006 All rights reserved6.4.3 Communication network profile Figure 19 shows the class structure of a GSDML communication network profile.

40、CommNetworkProfile ApplicationLayers TransportLayers 1 1Figure 19 PROFINET communication network profile class diagram NOTE In GSDML the classes of the communication network profile are empty. The reason is that no options of the communication properties of a PROFINET device are provided. The XML sc

41、hema representing the GSDML communication network profile template is defined in D.5.3. Page 125 Insert the following new Annex D before the Bibliography. ISO 15745-4:2003/Amd.1:2006(E) ISO 2006 All rights reserved 9Annex D (normative) PROFINET profile templates D.1 Overview PROFINET is an Ethernet

42、based network compliant to IEC 61784-1 (Ed.1) CP 3/3. PROFINET uses the profile description based on ISO 15745-1. The profile technology name is GSDML (Generic Station Description Markup Language). It is not the purpose of the GSDML format to describe technological functions or the graphical user in

43、terface of a device. For this purpose already established concepts (for example Electronic Device Description Language (EDDL) according IEC 61804-2) are recommended. By using the GSDML a GSD (Generic Station Description) file is created. In order to distinguish from the PROFIBUS 2)GSD format describ

44、ed in ISO 15745-3:2003, Annex B, the term “GSDML based file“ is used in this document. A GSDML based file can contain more than one Device Access Points (DAP). A DAP is a special module which connects the device to the network.This allows building one file for a family of devices sharing the same mo

45、dules (see D.4.4.1 and D.4.5). D.2 Data types Table D.1 describes the data types used in the GSDML. Regular expressions are used as defined in REC-xml-20001006. 2)PROFIBUS is a trade name of PROFIBUS International (PI). This information is given for the convenience of users of ISO 15745 and does not

46、 constitute an endorsement by ISO of the trademark holder or any of its products. Compliance to this profile does not require use of the trade name PROFIBUS. Use of the trade name PROFIBUS requires permission of PROFIBUS International. ISO 15745-4:2003/Amd.1:2006(E) 10 ISO 2006 All rights reservedTa

47、ble D.1 Data types Name Definition Schema Description Boolean http:/www.w3.org/2001/XMLSchema See (REC-xmlschema-2-20010502) Enumeration GSDML-DeviceProfile-v1.0.xsd String with defined content IdT GSDML-Primitives-v1.0.xsd Used for object identification. The value list shall comply with the followi

48、ng regular expression: (S(.)*S)|S NormalizedString http:/www.w3.org/2001/XMLSchema See (REC-xmlschema-2-20010502) Token http:/www.w3.org/2001/XMLSchema See (REC-xmlschema-2-20010502) RefIdT GSDML-Primitives-v1.0.xsd Used for object reference Unsigned8 GSDML-Primitives-v1.0.xsd Unsigned integer in range 0255 Unsigned16 GSDML-Primitives-v1.0.xsd Unsigned integer in range 065535 Unsigned32 GSDML-Primitives-v1.0.xsd Unsigned integer in range 0 4294967295 ValueList GSDML-Primitives-v1.0.xsd Base type for a list including ranges of unsigned values. The value list shall co