ISO IEC 11801 AMD 2-2010 Information technology - Generic cabling for customer premises Amendment 2《信息技术 客户终端的综合布线 修改件2》.pdf

1、 ISO/IEC 11801 Edition 2.0 2010-04 INTERNATIONAL STANDARD Information technology Generic cabling for customer premises ISO/IEC 11801:2002/A2:2010(E) AMENDMENT 2 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2010 ISO/IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no par

2、t of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about ISO/IEC co

3、pyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC

4、The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IE

5、C. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives inf

6、ormation on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The w

7、orlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/

8、custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 ISO/IEC 11801 Edition 2.0 2010-04 INTERNATIONAL STANDARD Information technology Gene

9、ric cabling for customer premises INTERNATIONAL ELECTROTECHNICAL COMMISSION XA ICS 35.200 PRICE CODE ISBN 978-2-88910-819-0 AMENDMENT 2 2 11801 Amend. 2 ISO/IEC:2010(E) FOREWORD Amendment 2 to International Standard ISO/IEC 11801 was prepared by subcommittee 25: Interconnection of information techno

10、logy, of ISO/IEC joint technical committee 1: Information technology. This International Standard has been approved by vote of the member bodies, and the voting results may be obtained from the address given on the second title page. _ INTRODUCTION Add, at the end of the existing introductions the f

11、ollowing text: INTRODUCTION to Amendment 2 Amendment 2 of ISO/IEC 11801:2002 provides balanced cabling models, requirements and normative references for Category 6 Aand Category 7 Acomponents, requirements for Class E Aand Class F Alinks, together with amendments to the requirements for optical fibr

12、e cabling. Global change: Replace, throughout ISO/IEC 11801:2002 and Amendment 1:2008 “optical fibre channel” by “optical fibre cabling channel”. 2 Normative references Replace the entire existing Clause 2 of both ISO/IEC 11801:2002, as well Amendment 1:2008, by the following: The following referenc

13、ed documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. The provisions of the referenced specifications other than ISO/IEC, IEC

14、, ISO and ITU documents, as identified in this clause, are valid within the context of this International Standard. The reference to such a specification within this International Standard does not give it any further status within ISO or IEC. In particular, it does not give the referenced specifica

15、tion the status of an International Standard. IEC 60352 (all parts), Solderless connections IEC 60352-3, Solderless connections Part 3: Solderless accessible insulation displacement connections General requirements, test methods and practical guidance IEC 60352-4, Solderless connections Part 4: Sold

16、erless non-accessible insulation displacement connections General requirements, test methods and practical guidance IEC 60352-5, Solderless connections Part 5: Press-in connections General requirements, test methods and practical guidance IEC 60352-6, Solderless connections Part 6: Insulation pierci

17、ng connections General requirements, test methods and practical guidance 11801 Amend. 2 ISO/IEC:2010(E) 3 IEC 60352-7, Solderless connections Part 7: Spring clamp connections General requirements, test methods and practical guidance IEC 60352-8, Solderless connections Part 8: Compression mount conne

18、ctions General requirements, test methods and practical guidance 1IEC 60364-1, Low-voltage electrical installations Part 1: Fundamental principles, assessment of general characteristics, definitions IEC 60512-2-1, Connectors for electronic equipment Tests and measurements Part 2-1: Electrical contin

19、uity and contact resistance tests Test 2a: Contact resistance Millivolt level method IEC 60512-3-1, Connectors for electronic equipment Tests and measurements Part 3-1: Insulation tests Test 3a: Insulation resistance IEC 60512-4-1, Connectors for electronic equipment Tests and measurements Part 4-1:

20、 Voltage stress tests Test 4a: Voltage proof IEC 60512-5-2, Connectors for electronic equipment Tests and measurements Part 5-2: Current-carrying capacity tests Test 5b: Current-temperature derating IEC 60512-25-1, Connectors for electronic equipment Tests and measurements Part 25-1: Test 25a Crosst

21、alk ratio IEC 60512-25-2:2002, Connectors for electronic equipment Tests and measurements Part 25-2: Test 25b Attenuation (insertion loss) IEC 60512-25-4:2001, Connectors for electronic equipment Tests and measurements Part 25-4: Test 25d Propagation delay IEC 60512-25-5, Connectors for electronic e

22、quipment Tests and measurements Part 25-5: Test 25e Return loss IEC 60512-25-9:2008, Connectors for electronic equipment Tests and measurements Part 25-9: Signal integrity tests Test 25i: Alien crosstalk IEC 60512-26-100, Connectors for electronic equipment Tests and measurements Part 26-100: Measur

23、ement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 Tests 26a to 26g IEC 60603-7, Connectors for electronic equipment Part 7: Detail specification for 8-way, unshielded, free and fixed connectors IEC 60603-7-1, Connectors for electronic equipment Par

24、t 7-1: Detail specification for 8-way, shielded free and fixed connectors IEC 60603-7-2:, Connectors for electronic equipment Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz 2_ 1To be published. 2Second edition to

25、 be published. 4 11801 Amend. 2 ISO/IEC:2010(E) IEC 60603-7-3:, Connectors for electronic equipment Part 7-3: Detail specification for 8- way, shielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz 3IEC 60603-7-4:, Connectors for electronic equipment Part 7-4: Det

26、ail specification for 8- way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz 4IEC 60603-7-5:, Connectors for electronic equipment Part 7-5: Detail specification for 8- way, shielded, free and fixed connectors, for data transmissions with frequencies up t

27、o 250 MHz 5IEC 60603-7-7:, Connectors for electronic equipment Part 7-7: Detail specification for 8- way, shielded, free and fixed connectors, for data transmission with frequencies up to 600 MHz 6IEC 60603-7-41:, Connectors for electronic equipment Part 7-41: Detail specification for 8-way, unshiel

28、ded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz IEC 60603-7-51:, Connectors for electronic equipment Part 7-51: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz IEC 60603-7-71:, Connectors

29、 for electronic equipment Part 7-71: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 1 000 MHz 7IEC 60793-1-40, Optical fibres Part 1-40: Measurement methods and test procedures Attenuation IEC 60793-1-44, Optical fibres Part 1-44: Me

30、asurement methods and test procedures Cut-off wavelength IEC 60793-1-49, Optical fibres Part 1-49: Measurement methods and test procedures Differential mode delay IEC 60793-2:2007, Optical fibres Part 2: Product specifications General IEC 60793-2-10, Optical fibres Part 2-10: Product specifications

31、Sectional specification for category A1 multimode fibres IEC 60793-2-50, Optical fibres Part 2-50: Product specifications Sectional specification for class B single-mode fibres IEC 60794 (all parts), Optical fibre cables IEC 60794-2, Optical fibre cables Part 2: Indoor cables Sectional specification

32、 _ 3Second edition to be published. 4Second edition to be published. 5Second edition to be published. 6Third edition to be published. 7To be published. 11801 Amend. 2 ISO/IEC:2010(E) 5 IEC 60825 (all parts), Safety of laser products IEC 60874-19-1:2007, Fibre optic interconnecting devices and passiv

33、e components Connectors for optical fibres and cables Part 19-1: Fibre optic patch cord connector type SC-PC (floating duplex) standard terminated on multimode fibre type A1a, A1b Detail specification IEC 60874-19-2:1999, Connectors for optical fibres and cables Part 19-2: Fibre optic adaptor (duple

34、x) type SC for single-mode fibre connectors Detail specification IEC 60874-19-3:2007, Fibre optic interconnecting devices and passive components Connectors for optical fibres and cables Part 19-3 Fibre optic adaptor (duplex) type SC for multimode fibre connectors Detail specification IEC 61073-1, Fi

35、bre optic interconnecting devices and passive components Mechanical splices and fusion splice protectors for optical fibres and cables Part 1: Generic specification IEC 61076-3-104, Connectors for electronic equipment Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for

36、 data transmissions with frequencies up to 1 000 MHz IEC 61076-3-110, Connectors for electronic equipment Part 3-110: Detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 1 000 MHz IEC 61156 (all parts), Multicore and symmetrical pair/quad cables

37、for digital communications IEC 61156-1:2007, Multicore and symmetrical pair/quad cables for digital communications Part 1: Generic specification Amendment 1 (2009) IEC 61156-2:, Multicore and symmetrical pair/quad cables for digital communications Part 2: Symmetrical pair/quad cables with transmissi

38、on characteristics up to 100 MHz Horizontal floor cable Sectional specification IEC 61156-3:2008, Multicore and symmetrical pair/quad cables for digital communications Part 3: Work area wiring Sectional specification IEC 61156-4:2009, Multicore and symmetrical pair/quad cables for digital communicat

39、ions Part 4: Riser cables Sectional specification IEC 61156-5:2009, Multicore and symmetrical pair/quad cables for digital communications Part 5: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz Horizontal floor wiring Sectional specification IEC 61156-6, Multicore and

40、symmetrical pair/quad cables for digital communications Part 6: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz Work area wiring Sectional specification 8IEC 61300-1, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part

41、1: General and guidance IEC 61300-2-2:1995, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-2: Tests Mating durability _ 8Refers to the third edition which is currently in preparation 6 11801 Amend. 2 ISO/IEC:2010(E) IEC 61300-3-6:1997, Fibre o

42、ptic interconnecting devices and passive components Basic test and measurement procedures Part 3-6: Examinations and measurements Return loss Amendment 1:1998 Amendment 2:1999 IEC 61300-3-34:2001, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3

43、-34: Examinations and measurements Attenuation of random mated connectors IEC 61754-20:2002, Fibre optic connector interfaces Part 20: Type LC connector family IEC 61935-1, Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 1: Installed cabling IEC

44、61935-2, Testing of balanced communication cabling in accorance with ISO/IEC 11801 Part 2: Patch cords and work area cords IEC 62153-4-12, Metallic communication cable test methods Part 4-12: Electromagnetic compatibility (EMC) Coupling attenuation or screened attenuation of connecting hardware Abso

45、rbing clamp method ISO/IEC TR 14763-2:2000, Information technology Implementation and operation of customer premises cabling Part 2: Planning and installation ISO/IEC 14763-3, Information technology Implementation and operation of customer premises cabling Part 3: Testing of optical fibre cabling IS

46、O/IEC 15018, Information technology Generic cabling for homes ISO/IEC 18010, Information technology Pathways and spaces for customer premises cabling ISO/IEC TR 24750:2007, Information technology Assessment and mitigation of installed balanced cabling channels in order to suport 10GBASE-T ITU-T Reco

47、mmendation O.9: Measuring arrangements to assess the degree of unbalance about earth 3.1 Terms and definitions Add the following new terms and definitions: 3.1.84 cabled optical fibre category system of defining requirements for the cabled optical fibre performance within optical fibre cabling chann

48、els and links NOTE Also referred to as performance codes in some standards. 93.1.85 equipment interface location where a connection between equipment and the cabling system occurs _ 9Standards developed by IEC subcommittee 86C use this definition in support of JTC 1/SC25 standards. 11801 Amend. 2 ISO/IEC:2010(E) 7 3.1.86 test interface location where a connection between test equipment and the cabling to be tested occurs 3.1.74 Replace, in ISO/IEC 11801:2002, the existing definition 3.1.56 for the term “small form factor connector” (renumbered