ISO IEC 13872-2003 Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network Specification func.pdf

1、 Reference number ISO/IEC 13872:2003(E) ISO/IEC 2003INTERNATIONAL STANDARD ISO/IEC 13872 Second edition 2003-04-01Information technology Telecommunications and information exchange between systems Private Integrated Services Network Specification, functional model and information flows Call Diversio

2、n supplementary services Technologies de linformation Tlcommunications et change dinformation entre systmes Rseau priv intgration de services Spcification, modle fonctionnel et dbit dinformation Services supplmentaires de diversion ISO/IEC 13872:2003(E) PDF disclaimer This PDF file may contain embed

3、ded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of n

4、ot infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters w

5、ere optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO/IEC 2003 All rights reserved. Unless otherwise s

6、pecified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright offic

7、e Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO/IEC 2003 All rights reservedISO/IEC 13872:2003(E) ISO/IEC 2003 All rights reserved iii Contents Foreword vii Introduction viii 1 Scope 1 2 Conforma

8、nce 1 3 Normative references 1 4 Terms and definitions 2 4.1 External definitions 2 4.2 Other definitions 2 4.2.1 Additional network feature 2 4.2.2 Busy 2 4.2.3 Call, basic call 3 4.2.4 Connected number 3 4.2.5 Call Deflection 3 4.2.6 Call Deflection from Alert 3 4.2.7 Call Deflection Immediate 3 4

9、2.8 Diversion 3 4.2.9 Diversion from Alert 3 4.2.10 Diversion Immediate 3 4.2.11 Diverted-to number 3 4.2.12 Diverted-to subaddress 3 4.2.13 Diverted-to user 3 4.2.14 Diverting cause 3 4.2.15 Diverting number 3 4.2.16 Forwarding 3 4.2.17 Forward switching 3 4.2.18 Last diverting user 3 4.2.19 Origi

10、nal called number 4 4.2.20 Original called user 4 4.2.21 Partial rerouteing 4 4.2.22 Presentation indicator 4 4.2.23 PISN number 4 4.2.24 Private 4 4.2.25 Public 4 4.2.26 Public ISDN 4 4.2.27 Rerouteing 4 4.2.28 Served user 4 4.2.29 Terminal, terminal equipment 4 4.2.30 User A 4 4.2.31 User B 4 4.2.

11、32 User B1, user B2, user B3, etc. 4 4.2.33 User C 4 5 Acronyms 5 6 SS-CFU stage 1 specification 6 6.1 Description 6 6.1.1 General description 6 6.1.2 Qualifications on applicability to telecommunication services 6ISO/IEC 13872:2003(E) iv ISO/IEC 2003 All rights reserved 6.2 Procedures 6 6.2.1 Provi

12、sion/withdrawal 6 6.2.2 Normal procedures 6 6.2.3 Exceptional procedures 9 6.3 Interactions with other supplementary services and ANFs 10 6.3.1 Calling Line Identification Presentation (CLIP) 10 6.3.2 Connected Line Identification Presentation (COLP) 10 6.3.3 Calling/Connected Line Identification Re

13、striction (CLIR) 10 6.3.4 Calling Name Identification Presentation (CNIP) 11 6.3.5 Connected Name Identification Presentation (CONP) 11 6.3.6 Calling/Connected Name Identification Restriction (CNIR) 11 6.3.7 Completion of Calls to Busy Subscriber (CCBS) 11 6.3.8 Completion of Calls on No Reply (CCNR

14、) 11 6.3.9 Call Transfer (CT) 11 6.3.10 Call Forwarding Busy (CFB) 11 6.3.11 Call Forwarding No Reply (CFNR) 12 6.3.12 Call Deflection (CD) 12 6.3.13 Path Replacement (PR) 12 6.4 Interworking considerations 12 7 SS-CFB stage 1 specification 12 7.1 Description 12 7.1.1 General description 12 7.1.2 Qu

15、alifications on applicability to telecommunication services 12 7.2 Procedures 12 7.2.1 Provision/withdrawal 12 7.2.2 Normal procedures 12 7.2.3 Exceptional procedures 12 7.3 Interactions with other supplementary services and ANFs 13 7.3.1 Calling Line Identification Presentation (CLIP) 13 7.3.2 Conn

16、ected Line Identification Presentation (COLP) 13 7.3.3 Calling/Connected Line Identification Restriction (CLIR) 13 7.3.4 Calling Name Identification Presentation (CNIP) 13 7.3.5 Connected Name Identification Presentation (CONP) 13 7.3.6 Calling/Connected Name Identification Restriction (CNIR) 13 7.3

17、7 Completion of Calls to Busy Subscriber (CCBS) 13 7.3.8 Completion of Calls on No Reply (CCNR) 13 7.3.9 Call Transfer (CT) 13 7.3.10 Call Forwarding Unconditional (CFU) 13 7.3.11 Call Forwarding No Reply (CFNR) 13 7.3.12 Call Deflection 13 7.3.13 Path Replacement (PR) 13 7.4 Interworking Considera

18、tions 14 8 SS-CFNR stage 1 specification 14 8.1 Description 14 8.1.1 General description 14 8.1.2 Qualifications on applicability to telecommunication services 14 8.2 Procedures 14 8.2.1 Provision/withdrawal 14ISO/IEC 13872:2003(E) ISO/IEC 2003 All rights reserved v 8.2.2 Normal procedures 14 8.2.3

19、Exceptional Procedures 14 8.3 Interactions with other supplementary services and ANFs 15 8.3.1 Calling Line Identification Presentation (CLIP) 15 8.3.2 Connected Line Identification Presentation (COLP) 15 8.3.3 Calling/Connected Line Identification Restriction (CLIR) 15 8.3.4 Calling Name Identifica

20、tion Presentation (CNIP) 15 8.3.5 Connected Name Identification Presentation (CONP) 15 8.3.6 Calling/Connected Name Identification Restriction (CNIR) 15 8.3.7 Completion of Calls to Busy Subscriber (CCBS) 15 8.3.8 Completion of Calls on No Reply (CCNR) 15 8.3.9 Call Transfer (CT) 16 8.3.10 Call Forw

21、arding Unconditional (CFU) 16 8.3.11 Call Forwarding Busy (CFB) 16 8.3.12 Call Deflection (CD) 16 8.3.13 Path Replacement (PR) 16 8.4 Interworking Considerations 16 9 SS-CD stage 1 specification 16 9.1 Description 16 9.1.1 General description 16 9.1.2 Qualifications on applicability to telecommunica

22、tion services 16 9.2 Procedures 16 9.2.1 Provision/withdrawal 16 9.2.2 Normal procedures 16 9.2.3 Exceptional Procedures 17 9.3 Interaction with other supplementary services and ANFs 17 9.3.1 Calling Line Identification Presentation (CLIP) 17 9.3.2 Connected Line Identification Presentation (COLP) 1

23、7 9.3.3 Calling/Connected Line Identification Restriction (CLIR) 18 9.3.4 Calling Name Identification Presentation (CNIP) 18 9.3.5 Connected Name Identification Presentation (CONP) 18 9.3.6 Calling/Connected Name Identification Restriction (CNIR) 18 9.3.7 Completion of Calls to Busy Subscriber (CCBS

24、) 18 9.3.8 Completion of Calls on No Reply (CCNR) 18 9.3.9 Call Transfer (CT) 18 9.3.10 Call Forwarding Unconditional (CFU) 18 9.3.11 Call Forwarding on Busy (CFB) 18 9.3.12 Call Forwarding on No Reply (CFNR) 18 9.3.13 Path Replacement (PR) 18 9.4 Interworking considerations 18 9.5 Overall SDL 18 10

25、 SS-DIV stage 2 specification 22 10.1 Functional model 22 10.1.1 Functional model description 22 10.1.2 Description of the functional entities 23 10.1.3 Relationship of functional model to basic call functional model 24 10.2 Information flows 26 10.2.1 Definition of information flows 26 10.2.2 Examp

26、les of information flow sequences 35ISO/IEC 13872:2003(E) vi ISO/IEC 2003 All rights reserved 10.3 Functional entity actions 53 10.3.1 Functional entity actions of FE1 53 10.3.2 Functional entity actions of FE2 53 10.3.3 Functional entity actions of FE3 53 10.3.4 Functional entity actions of FE4 54

27、10.3.5 Functional entity actions of FE5 54 10.3.6 Functional entity actions of FE6 55 10.3.7 Functional entity actions of FE7 55 10.3.8 Functional entity actions of FE8 55 10.3.9 Functional entity actions of FE9 55 10.4 Functional entity behaviour 55 10.4.1 Behaviour of FE1 55 10.4.2 Behaviour of FE

28、2 56 10.4.3 Behaviour of FE3 58 10.4.4 Behaviour of FE4 60 10.4.5 Behaviour of FE5 64 10.4.6 Behaviour of FE6 65 10.4.7 Behaviour of FE7 67 10.4.8 Behaviour of FE8 68 10.4.9 Behaviour of FE9 69 10.5 Allocation of functional entities to physical equipment 70 10.6 Interworking considerations 71 Annex

29、A - Bibliography 72ISO/IEC 13872:2003(E) ISO/IEC 2003 All rights reserved vii Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO o

30、r IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations,

31、governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directive

32、s, Part 2. The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the nat

33、ional bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. ISO/IEC 13872 was prepared by ECMA (as ECMA-173) and was adopted

34、 under a special “fast-track procedure”, by Joint Technical Committee ISO/IEC JTC 1, Information technology, in parallel with its approval by national bodies of ISO and IEC. This second edition cancels and replaces the first edition (ISO/IEC 13872:1995), which has been technically revised. ISO/IEC

35、13872:2003(E) viii ISO/IEC 2003 All rights reserved Introduction This International Standard is one of a series of Standards defining services and signalling protocols applicable to Private Integrated Services Networks (PISNs). The series uses ISDN concepts as developed by ITU-T and conforms to the

36、framework of International Standards for Open Systems Interconnection as defined by ISO/IEC. This International Standard specifies the Call Diversion supplementary services: Call Forwarding Unconditional (SS-CFU) Call Forwarding Busy (SS-CFB) Call Forwarding No Reply (SS-CFNR) Call Deflection (SS-CD

37、)This International Standard is based upon the practical experience of ECMA member companies and the results of their active and continuous participation in the work of ISO/IEC JTC 1, ITU-T, ETSI and other international and national standardization bodies. It represents a pragmatic and widely based

38、consensus. ISO/IEC 2003 All rights reserved 1 1S c o p eThis International Standard specifies the supplementary services Call Forwarding Unconditional (CFU), Call Forwarding Busy (CFB), Call Forwarding No Reply (CFNR) and Call Deflection (CD), which are applicable to various basic services supported

39、 by Private Integrated Services Networks (PISN). Basic services are specified in ISO/IEC 11574.SS-CFU, SS-CFB and SS-CFNR are supplementary services which apply during call establishment providing a diversion of an incoming call to an other destination. SS-CD is a supplementary service which allows

40、a served user to respond to an incoming call by requesting redirection of that call to another number specified in the response.Supplementary service specifications are produced in three stages, according to the method described in ETS 300 387. This International Standard contains the stage 1 and st

41、age 2 specifications of the Call Diversion supplementary services. The stage 1 specifications (clauses 6, 7, 8 and 9) specify the supplementary services as seen by users of PISNs. The stage 2 specification (clause 10) identifies the functional entities involved in the supplementary services and the

42、information flows between them. 2 ConformanceIn order to conform to this International Standard, a stage 3 standard shall specify signalling protocols and equipment behaviour that are capable of being used in a PISN which supports the supplementary services specified in this International Standard.

43、This means that, to claim conformance, a stage 3 standard is required to be adequate for the support of those aspects of clauses 6, 7, 8 and 9 (stage 1) and clause 10 (stage 2) which are relevant to the interface or equipment to which the stage 3 standard applies.A stage 3 standard for SS-CFU shall

44、support clauses 6 and 10 respectively.A stage 3 standard for SS-CFB shall support clauses 7 and 10 respectively.A stage 3 standard for SS-CFNR shall support clauses 8 and 10 respectively.A stage 3 standard for SS-CD shall support clauses 9 and 10 respectively. 3 Normative references ISO/IEC 11571:19

45、98, Information technology - Telecommunications and information exchange between systems - Private Integrated Services Networks - AddressingISO/IEC 11574:2000, Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network - Circuit-mode 64

46、 kbit/s bearer services - Service description, functional capabilities and information flows ISO/IEC 11579-1:1994, Information technology - Telecommunications and information exchange between systems - Private integrated services network - Part 1: Reference configuration for PISN Exchanges (PINX)ISO

47、/IEC 13864:1995, Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network - Specification, functional model and information flows - Name identification supplementary servicesISO/IEC 14136:1995, Information technology - Telecommunicati

48、ons and information exchange between systems - Private Integrated Services Network - Specification, functional model and information flows - Identification supplementary services The following referenced documents are indispensable for the application of this document. For dated references, only the

49、 edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. INTERNATIONAL STANDARD ISO/IEC 13872:2003(E)Information technology Telecommunications and information exchange between systems Private Integrated Services Network Specification, functional model and information flows Call Diversion supplementary services ISO/IEC 13872:2003(E) 2 ISO/IEC 2003 All rights reservedETS 300 387:1994, Private Telecommunication Network (PTN); Me