EN 16951-1-2018 Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Procedures for assessing long term perf.pdf

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Railway applications Track Noise barriers and related devices acting on airborne sound propagation Procedures for assessing long term performancePart 1: Acoustic characteristicsBS EN 16951-1:2018EUROPEAN STANDARD NORME

2、EUROPENNE EUROPISCHE NORM EN 16951-1 May 2018 ICS 93.100 English Version Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Procedures for assessing long term performance - Part 1: Acoustic characteristics Applications ferroviaires - Voie - crans

3、 antibruit et dispositifs connexes influant sur la propagation arienne du son - Mthodes dvaluation des performances long terme - Partie 1 : Caractristiques acoustiques Bahnanwendungen - Oberbau - Lrmschutzwnde und verwandte Vorrichtungen zur Beeinflussung der Luftschallausbreitung - Bewertungsverfah

4、ren fr das Langzeitverhalten - Teil 1: Akustische Merkmale This European Standard was approved by CEN on 2 February 2018. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard witho

5、ut any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other l

6、anguage made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Den

7、mark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN

8、COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16951-1:2018 ENat

9、ional forewordThis British Standard is the UK implementation of EN 16951-1:2018.The UK participation in its preparation was entrusted to Technical Committee RAE/2, Railway Applications - Track.A list of organizations represented on this committee can be obtained on request to its secretary.This publ

10、ication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 90735 7ICS 93.100Compliance with a British Standard cannot confer immunity f

11、rom legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 16951-1:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16951-1

12、May 2018 ICS 93.100 English Version Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Procedures for assessing long term performance - Part 1: Acoustic characteristics Applications ferroviaires - Voie - crans antibruit et dispositifs connexes in

13、fluant sur la propagation arienne du son - Mthodes dvaluation des performances long terme - Partie 1 : Caractristiques acoustiques Bahnanwendungen - Oberbau - Lrmschutzwnde und verwandte Vorrichtungen zur Beeinflussung der Luftschallausbreitung - Bewertungsverfahren fr das Langzeitverhalten - Teil 1

14、: Akustische Merkmale This European Standard was approved by CEN on 2 February 2018. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists a

15、nd bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the

16、 responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugosl

17、av Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT E

18、UROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16951-1:2018 EBS EN 16951-1:2018EN 16951-1:2018 (E) 2

19、Contents Page European foreword . 3 Introduction 5 1 Scope 6 2 Normative references 6 3 Terms and definitions . 6 4 Requirements . 7 5 Report 9 Annex A (normative) Line side exposure Classification of environmental conditions . 10 A.1 General . 10 A.2 Environmental classifications appropriate to rai

20、lway noise barriers and related devices acting on sound propagation selected from EN 60721-3-4 . 11 Annex B (informative) Material standards . 13 B.1 General . 13 B.2 References 13 Bibliography . 16 BS EN 16951-1:2018EN 16951-1:2018 (E) 3 European foreword This document (EN 16951-1:2018) has been pr

21、epared by Technical Committee CEN/TC 256 “Railway applications”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2018, and conflicting national st

22、andards shall be withdrawn at the latest by November 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This European Standard is one of the serie

23、s EN 16951, Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Procedures for assessing long term performance, as listed below: Part 1: Acoustic characteristics this document; Part 2: Non-acoustic characteristics. This part of EN 16951 is concern

24、ed with long-term durability. It should be read in conjunction with: EN 16272-1, Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics - Sound absorption in the

25、 laboratory under diffuse sound field conditions; EN 16272-2, Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics - Airborne sound insulation in the laborator

26、y under diffuse sound field conditions; EN 16272-3-1, Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 3-1: Normalized railway noise spectrum and single number ratings for diffuse fiel

27、d applications; EN 16272-3-2, Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 3-2: Normalized railway noise spectrum and single number ratings for direct field applications; CEN/TS 16

28、272-5, Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection under direct sound field conditions; EN 16272-6, Railway appli

29、cations - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions; EN 16727-1, Railway applications - T

30、rack - Noise barriers and related devices acting on airborne sound propagation - Non-acoustic performance - Part 1: Mechanical performance under static loadings - Calculation and test method; BS EN 16951-1:2018EN 16951-1:2018 (E) 4 EN 16727-2-1, Railway applications - Track - Noise barriers and rela

31、ted devices acting on airborne sound propagation - Non-acoustic performance - Part 2-1: Mechanical performance under dynamic loadings due to passing trains - Resistance to fatigue; EN 16727-2-2, Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation -

32、Non-acoustic performance - Part 2-2: Mechanical performance under dynamic loadings caused by passing trains - Calculation method; EN 16727-3, Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Non-acoustic performance - Part 3: General safety and

33、 environmental requirements; EN 16951-2, Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Procedures for assessing long term performance - Part 2: Non-acoustic characteristics; EN 60721-3-4, Classification of environmental conditions - Part 3:

34、Classification of groups of environmental parameters and their severities - Section 4: Stationary use at non-weatherprotected locations (IEC 60721-3-4). According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this Euro

35、pean Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slova

36、kia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16951-1:2018EN 16951-1:2018 (E) 5 Introduction Noise barriers and related devices acting on sound propagation alongside railways should not only fulfil their acoustic function and structural design requirements in accord

37、ance with appropriate documents, but also maintain their performance during the required working life. The acoustic elements need to resist the actions of agents within the line side environment that could significantly degrade their performance. The acoustic characteristics of noise barriers and re

38、lated devices acting on sound propagation can deteriorate significantly over the duration of their working life if they are not installed or maintained in accordance with the manufacturers recommendations, or if the materials are not appropriate for the line side environment. All elements in the con

39、struction of noise barriers and related devices acting on sound propagation should be resistant to electrolytic or/and chemical corrosion and embrittlement, be dimensionally stable and have generally a high ageing resistance in many differing conditions. BS EN 16951-1:2018EN 16951-1:2018 (E) 6 1 Sco

40、pe This European Standard specifies requirements for assessing the working life and provides the relevant exposure conditions. Standards of construction and any material tests conducted should provide evidence of resistance to specified conditions selected from the following: I. Chemical Agents Loca

41、tion dependent II. De-icing salt Location/climate dependent III. Dirty water/dust Location/climate dependent IV. Dew Climate dependent V. Freeze/thaw Climate dependent VI. Cold Climate dependent VII. Heat Climate dependent VIII. UV Radiation Climate dependent IX. Traffic Vibration Location dependent

42、 X. Biological Process Climate dependent XI. Ozone Location dependent XII. Water Climate dependent XIII. Water spray (Wet/dry) Location dependent NOTE Combinations of different materials are worth a special attention, whether inside a single device or in combination with other devices (for example:

43、a combination of different acoustic elements or another combination of acoustic and structural elements). 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition

44、 cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 60721-3-4, Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 4: Stationary use at non-we

45、atherprotected locations (IEC 60721-3-4) 3 Terms and definitions For the purpose of this document, the following terms and definitions apply. 3.1 noise barrier noise reducing device, which obstructs the direct transmission of airborne sound emanating from railways, and which will typically span betw

46、een posts and also may overhang the railway Note 1 to entry: Noise barriers are generally made of acoustic and structural elements (see 3.3 and 3.4). BS EN 16951-1:2018EN 16951-1:2018 (E) 7 3.2 cladding noise reducing device, which is attached to a wall or other structure and reduces the amount of s

47、ound reflected Note 1 to entry: Claddings are generally made of acoustic and structural elements (see 3.3 and 3.4). 3.3 acoustic element element whose primary function is to provide the acoustic performance of the device 3.4 structural element element whose primary function is to support or hold in

48、place acoustic elements Note 1 to entry: In some noise barriers, the acoustic function and the structural function cannot be clearly separated and attributed to different components. 3.5 added device added component that influences the acoustic performance of the original noise-reducing device (acti

49、ng primarily on the diffracted energy) Note 1 to entry: In some noise barriers, the acoustic function and the structural function cannot be clearly separated and attributed to different components. 3.6 line side exposure use of the product as a noise barrier installed alongside railways 3.7 acoustic working life period of time during which the declared acoustic performance(s) DL(from EN 16272-3-1) and/or DLR(from EN 16272-3-1) and/or DLRI(from EN 16272-3-2) and/or DLSI(from EN 16272-3-2) of the device will be m