EN 50134-2-2017 Alarm systems - Social alarm systems - Part 2 Trigger devices.pdf

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Alarm systems - Social alarm systemsPart 2: Trigger devicesBS EN 501342:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 50134-2 November 2017 ICS 13.320 Supersedes EN 50134-2:1999English Version Alarm systems -

2、 Social alarm systems - Part 2: Trigger devices Systmes dalarme - Systmes dalarme sociale - Partie 2: Dclencheurs Alarmanlagen - Personen-Hilferufanlagen - Teil 2: Auslsegerte This European Standard was approved by CENELEC on 2017-08-14. CENELEC members are bound to comply with the CEN/CENELEC Inter

3、nal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any C

4、ENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the offic

5、ial versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, M

6、alta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CE

7、N-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 50134-2:2017 ENational forewordThis British Standard is the UK implementation of EN 501342:2017. It supersedes BS EN

8、 501342:2000, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee GW/1/12, Social alarms.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provis

9、ions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 91851 3ICS 13.320Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published u

10、nder the authority of the Standards Policy and Strategy Committee on 31 January 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 501342:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 50134-2 November 2017 ICS 13.320 Supersedes EN 50134-2:1999Englis

11、h Version Alarm systems - Social alarm systems - Part 2: Trigger devices Systmes dalarme - Systmes dalarme sociale - Partie 2: Dclencheurs Alarmanlagen - Personen-Hilferufanlagen - Teil 2: Auslsegerte This European Standard was approved by CENELEC on 2017-08-14. CENELEC members are bound to comply w

12、ith the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Mana

13、gement Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the

14、 same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

15、 Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Ele

16、ktrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 50134-2:2017 EBS EN 501342:2017EN 50134-2:2017 (E) 2 Contents Page European foreword . 4 In

17、troduction . 6 1 Scope 7 2 Normative references 7 3 Terms and definitions . 7 4 Requirements . 8 4.1 General Requirements 8 4.2 Functional requirements 8 4.2.1 Trigger device with an internal primary battery 8 4.2.2 Trigger device using the mains supply as its primary source of power 9 4.2.3 Manuall

18、y activated trigger devices 9 4.2.4 Automatically activated trigger devices 9 4.3 Interconnections and communications 9 4.4 Documentation 10 4.4.1 Marking . 10 4.4.2 User documentation 10 5 Test of manually activated trigger devices . 10 5.1 Test categories 10 5.2 Standard atmospheric condition for

19、testing 10 5.3 Number of trigger devices used for testing . 11 5.4 General conditions for tests 11 5.4.1 Triggers using wired transmission 11 5.4.2 Triggers using wire-free transmission . 11 5.5 Functional tests . 12 5.5.1 Wired triggers devices. 12 5.5.2 Triggers using wire-free transmission . 12 5

20、5.3 Fixed trigger type . 13 5.5.4 Portable trigger with neckband relief (anti-strangle) device . 13 5.5.5 Push button fixed trigger types 13 5.5.6 Push button portable trigger types 14 5.5.7 Pull switch fixed trigger type 15 5.5.8 Pull activated portable trigger 15 5.6 Environmental tests 16 5.6.1

21、General 16 BS EN 501342:2017EN 50134-2:2017 (E) 3 5.6.2 Selection of tests and severities (environmental classes) 17 5.6.3 Tests applicable to the different environmental classes . 17 5.6.4 Environmental test exposures not applicable to different types of triggers . 17 Table 1 Environmental tests fo

22、r fixed trigger devices . 18 Table 2 Environmental tests for Portable trigger devices . 19 5.6.5 Specific environmental test requirements for different types of trigger devices . 20 Annex A (normative) Measurements of contact and insulation resistances for mechanical contact function 26 A.1 General

23、26 A.2 Measurements of contact resistance . 26 A.3 Measurements of insulation resistance 26 Annex B (normative) Strain relief test jig 27 Annex C (normative) Test set-up by using rf-shielded test fixtures. 28 C.1 RF-shielded test fixture for the trigger device 28 C.2 RF-shielded test fixture for the

24、 local unit or controller . 28 C.3 Interconnection between trigger device and local unit or controller . 29 Bibliography 30 BS EN 501342:2017EN 50134-2:2017 (E) 4 European foreword This document (EN 50134-2:2017) has been prepared by CLC/TC 79 “Alarm systems”. The following dates are fixed: latest d

25、ate by which this document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-08-14 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2020-08-14 This document supersedes EN 50134-2:

26、1999. EN 50134-2:2017 includes the following significant technical changes with respect to EN 50134-2:1999: The scope has been extended to provide requirements for manually and automatically activated trigger devices transmitting a triggering signal; The normative references have been updated to tak

27、e account of latest revisions and to include ETSI EN 300 220-3-1 ETSI EN 303 406 for wireless radio trigger devices; The definitions have been updated to reflect changes in other parts of the series; in the general requirements, some requirements have been added to cover both manually and automatica

28、lly activated trigger devices; New or amended requirements have been added to include: The activation of one or many trigger devices not to inhibit the transmission of a triggering signal from any other trigger device within the same or adjacent systems. Trigger devices to generate an alarm triggeri

29、ng signal that can be decoded and differentiated from that of another trigger device connected to the same local unit or controller. Trigger devices using wire-free communications to transmit an identification code with sufficient different combinations to prevent the operation of the trigger device

30、 producing unwanted triggering in an adjacent system. Trigger devices using wire-free communications to automatically generate a triggering signal at least once every 24 h to indicate their continued active presence. No longer require a portable trigger devices where its only function is to used as

31、part of a social alarm system to use primary non -rechargeable batteries. Functional Requirements: Require the manufacturer to state the normal expected rate of activation for the device being not less than one activation per day. Require the trigger device to be capable of operating to the manufact

32、urers specified performance level for a period of at least 1 year or, if greater, the manufacturers stated duration without recharging or replacement of the battery. BS EN 501342:2017EN 50134-2:2017 (E) 5 For devices where the trigger device is activated by a push button require to be physically dis

33、tinguishable from any other controls. Revise the push button of activation area to a minimum of 150 mm2, with a minimum dimension of not less than 10 mm. For automatically activated trigger devices where the option exists, to indicate the return to the normal condition to the local unit and controll

34、er the manufacturer to indicate the conditions by which the normal state is determined. In interconnections Part 2: Trigger devices the present document; Part 3: Local unit and controller; Part 5: Interconnections and communications; Part 7: Application guidelines Technical Specification. BS EN 5013

35、42:2017EN 50134-2:2017 (E) 6 Introduction A social alarm system provides 24 h facilities for alarm triggering, identification, signal transmission, alarm reception, logging and 2-way speech communication, to provide reassurance and assistance for people considered to be at risk. A social alarm syste

36、m comprises a number of system parts, which can be configured in different ways to provide this functionality. A user can request assistance by the use of a manually activated trigger device resulting in an alarm triggering signal. In certain cases alarm triggering signals can be generated by automa

37、tic trigger devices. A local unit or controller receives the alarm triggering signal, switching from the normal to the alarm condition and indicating this to the user (some systems use an optional pre-alarm condition that allows the user to reset the alarm for a short period of time). Failure in the

38、 operation of a social alarm system or any of its parts may compromise the ability to provide timely reassurance and assistance which may lead to a risk to a users life. The trigger device is a part of the system and should be designed to ensure reliability beyond that of a normal consumer device. T

39、he design should take into consideration how to make it easier for the user to activate the trigger device while preventing accidental triggering of the device. This standard specifies the minimum requirements for the trigger device to ensure this system part provides the functionality and reliabili

40、ty required by a social alarm system. BS EN 501342:2017EN 50134-2:2017 (E) 7 1 Scope This European Standard specifies the requirements for manually and automatically activated trigger devices transmitting a triggering signal. This European Standard specifies the requirements and tests for trigger de

41、vices forming part of a social alarm system. This European Standard applies to all trigger devices that transmit a triggering signal to a local unit or controller using wired or wire-free interconnections methods. 2 Normative references The following documents, in whole or in part, are normatively r

42、eferenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 50134-1:2002, Alarm systems - Social alarm systems - Part 1: System

43、 requirements EN 50134-5, Alarm systems - Social alarm systems - Part 5: Interconnections and communications EN 60447, Basic and safety principles for man-machine interface, marking and identification - Actuating principles (IEC 60447) EN 61020-1:2009, Electromechanical switches for use in electrica

44、l and electronic equipment - Part 1: Generic specification (IEC 61020-1:2009) EN 50130-4, Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems EN 50130-5, Alarm

45、systems - Part 5: Environmental test methods ETSI EN 300 220-3-1, Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 3-1: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Low duty cycle high reliability equipment, S

46、ocial Alarms Equipment operating on designated frequencies (869,200 MHz to 869,250 MHz) ETSI EN 303 406, Short Range Devices (SRD); Social Alarms Equipment operating in the frequency range 25 MHz to 1 000 MHz 3 Terms and definitions For the purposes of this document, the terms and definitions given

47、in EN 50134-1:2002 and the following apply. 3.1 social alarm system system providing 24 h facilities for alarm triggering, identification, signal transmission, alarm reception, 2-way speech communication, reassurance and assistance, for use by persons considered to be at risk 3.2 controller interfac

48、e between one or more local units and the alarm transmission system 3.3 local unit interface between the user and the controller which enables two-way speech BS EN 501342:2017EN 50134-2:2017 (E) 8 3.4 trigger device system part operated by a person or automatically that communicates to the local uni

49、t or controller, initiating the alarm triggering signal 3.5 fixed trigger device trigger device in a fixed position 3.6 portable trigger device trigger device carried by the user and providing wire-free communication 3.7 interconnections transmission system that provides the communication between trigger devices and local unit and controller 3.8 alarm condition condition following the reception of an alarm triggering signal and the pre-alarm condition 3.9 triggering signal signal transmitted b