EN IEC 60376-2018 Specification of technical grade sulphur hexafluoride (SF6) and complementary gases to be used in its mixtures for use in electrical equipment.pdf

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Specification of technical grade sulphur hexafluoride (SF6) and complementary gases to be used in its mixtures for use in electrical equipmentBS EN IEC 60376:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC

2、60376 August 2018 ICS 29.040.20 Supersedes EN 60376:2005 English Version Specification of technical grade sulphur hexafluoride (SF6) and complementary gases to be used in its mixtures for use in electrical equipment (IEC 60376:2018) Spcification de la qualit technique de lhexafluorure de soufre (SF6

3、) et des gaz complmentaires employer dans les mlanges de SF6pour utilisation dans les appareils lectriques (IEC 60376:2018) Bestimmung der Reinheit der technisch einsetzbaren Qualitt von Schwefelhexafluorid (SF6) sowie Gasen fr den Gebrauch in SF6-Mischungen zur Verwendung in elektrischen Betriebsmi

4、tteln (IEC 60376:2018) This European Standard was approved by CENELEC on 2018-06-28. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lis

5、ts and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation u

6、nder the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark,

7、Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Europea

8、n Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwi

9、de for CENELEC Members. Ref. No. EN IEC 60376:2018 E National forewordThis British Standard is the UK implementation of EN IEC 60376:2018. It is identical to IEC 60376:2018. It supersedes BS EN 60376:2005, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committe

10、e GEL/10, Fluids for electrotechnical applications.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British

11、 Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 85305 0ICS 29.130.01; 29.040.20Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on

12、 31 August 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN IEC 60376:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 60376 August 2018 ICS 29.040.20 Supersedes EN 60376:2005 English Version Specification of technical grade sulphur hexafluoride

13、(SF6) and complementary gases to be used in its mixtures for use in electrical equipment (IEC 60376:2018) Spcification de la qualit technique de lhexafluorure de soufre (SF6) et des gaz complmentaires employer dans les mlanges de SF6pour utilisation dans les appareils lectriques (IEC 60376:2018) Bes

14、timmung der Reinheit der technisch einsetzbaren Qualitt von Schwefelhexafluorid (SF6) sowie Gasen fr den Gebrauch in SF6-Mischungen zur Verwendung in elektrischen Betriebsmitteln (IEC 60376:2018) This European Standard was approved by CENELEC on 2018-06-28. CENELEC members are bound to comply with t

15、he CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Manageme

16、nt Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the sam

17、e status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lit

18、huania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektro

19、technische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 60376:2018 E BS EN IEC 60376:2018EN IEC 60376:2018 2 European foreword The text of docu

20、ment 10/1056/FDIS, future edition 3 of IEC 60376, prepared by IEC/TC 10 “Fluids for electrotechnical applications“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 60376:2018. The following dates are fixed: latest date by which the document has to be implemented at na

21、tional level by publication of an identical national standard or by endorsement (dop) 2019-03-28 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2021-06-28 This document supersedes EN 60376:2005. Attention is drawn to the possibility that some of

22、the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60376:2018 was approved by CENELEC as a European Standard without any modification. In

23、 the official version, for Bibliography, the following note has to be added for the standard indicated: IEC 60068-2-17 NOTE Harmonized as EN 60068-2-17. ISO 14040:2006 NOTE Harmonized as EN ISO 14040:2006 (not modified). BS EN IEC 60376:2018EN IEC 60376:2018 3 Annex ZA (normative) Normative referenc

24、es to international publications with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references,

25、 the latest edition of the referenced document (including any amendments) applies. NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards liste

26、d in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60050-212 - International Electrotechnical Vocabulary - Part 212: Electrical insulating solids, liquids and gases - - IEC 60050-441 - International Electrotechnical Vocabulary (IEV) - Chapter 441: Switchgear, co

27、ntrolgear and fuses - - IEC 60050-826 - International Electrotechnical Vocabulary - Part 826: Electrical installations - - IEC 60480 - Guidelines for the checking and treatment of sulphur hexafluoride (SF6) taken from electrical equipment and specification for its re-use EN 60480 - IEC 62271-4 - Hig

28、h-voltage switchgear and controlgear - Part 4: Handling procedures for sulphur hexafluoride (SF6) and its mixtures EN 62271-4 - BS EN IEC 60376:2018 2 IEC 60376:2018 IEC 2018 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative references 6 3 Terms, definitions and abbreviated terms 7 3.1 Terms and definitio

29、ns 7 3.2 Abbreviated terms . 7 4 General requirements 8 5 Requirements for technical grade SF6. 8 6 Requirements for complementary gases to be used in SF6mixtures 9 7 Environmental impact 10 8 Handling, storage and transportation . 10 8.1 Gas handling procedures 10 8.2 Storage and transportation 10

30、Annex A (informative) Sulphur hexafluoride . 11 A.1 General . 11 A.2 Chemical properties 11 A.3 Physical properties . 11 A.4 Electrical properties 12 Annex B (informative) Environmental effects of SF6and its mixtures . 14 B.1 General . 14 B.2 Ecotoxicology . 14 B.3 Ozone depletion 14 B.4 Global warm

31、ing/climate change (greenhouse effect) . 14 B.5 Reducing the environmental impact of the use of SF6and CF4in electrical equipment 15 Annex C (informative) Detection techniques . 16 C.1 Detection techniques of SF6. 16 C.2 Detection techniques of N2. 17 C.3 Detection techniques of CF4. 17 Bibliography

32、 18 Figure A.1 Pressure/temperature/density characteristics for SF63 12 Table 1 Requirements for technical grade SF6. 8 Table 2 Requirements for N2to be used in SF6mixtures . 9 Table 3 Requirements for CF4to be used in SF6mixtures . 9 Table A.1 Main chemical characteristics of SF63 11 Table A.2 Main

33、 physical characteristics of SF63 . 12 Table A.3 Main electrical characteristics of SF63 13 Table C.1 Detection techniques for laboratory analysis of technical grade SF6(not exhaustive) . 16 Table C.2 Detection techniques for on-site analysis of technical grade SF6(not exhaustive) . 16 BS EN IEC 603

34、76:2018IEC 60376:2018 IEC 2018 3 Table C.3 Detection techniques for laboratory analysis of technical grade N2used in SF6mixtures (not exhaustive). 17 Table C.4 Detection techniques for laboratory analysis of technical grade CF4used in SF6mixtures (not exhaustive) . 17 BS EN IEC 60376:2018 4 IEC 6037

35、6:2018 IEC 2018 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ SPECIFICATION OF TECHNICAL GRADE SULPHUR HEXAFLUORIDE (SF6) AND COMPLEMENTARY GASES TO BE USED IN ITS MIXTURES FOR USE IN ELECTRICAL EQUIPMENT FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for s

36、tandardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes

37、 International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may parti

38、cipate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement bet

39、ween the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publicati

40、ons have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for a

41、ny misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the correspondin

42、g national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any ser

43、vices carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC Na

44、tional Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention

45、 is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC sh

46、all not be held responsible for identifying any or all such patent rights. International Standard IEC 60376 has been prepared by IEC technical committee 10: Fluids for electrotechnical applications. This third edition cancels and replaces the second edition published in 2005. This edition constitute

47、s a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the requirements for the use of SF6in electrical equipment have been confirmed; b) a specification for complementary gases to be used in SF6mixtures with N2and CF4 has b

48、een included; c) the introduction and scope have been merged; d) a new repartition of the annexes of IEC 60376, IEC 60480 and IEC 62271-4 has been included. BS EN IEC 60376:2018IEC 60376:2018 IEC 2018 5 The text of this International Standard is based on the following documents: FDIS Report on votin

49、g 10/1056/FDIS 10/1060/RVD Full information on the voting for the approval of this International Standard can be found in the report on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this document will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific document. At th