EN IEC 60598-2-17-2018 Luminaires - ParT 2-17 Particular requirements - Luminaires for stage lighting television and film studios (outdoor and indoor).pdf

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06LuminairesPart 2-17: Particular requirements - Luminaires for stage lighting, television and film studios (outdoor and indoor)BS EN IEC 60598-2-17:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 60598-2-17

2、March 2018 ICS 29.140.40; 97.200.10 Supersedes EN 60598-2-17:1989 English Version Luminaires - Part 2-17: Particular requirements - Luminaires for stage lighting, television and film studios (outdoor and indoor) (IEC 60598-2-17:2017) Luminaires - Partie 2-17: Exigences particulires - Luminaires pour

3、 clairage des scnes de thtre, pour prises de vues de tlvision et de cinma ( lextrieur et lintrieur) (IEC 60598-2-17:2017) Leuchten - Teil 2-17: Besondere Anforderungen - Leuchten fr Bhnenbeleuchtung, Fernseh- und Film-Studios (auen und innen) (IEC 60598-2-17:2017) This European Standard was approved

4、 by CENELEC on 2017-07-04. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

5、 standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own l

6、anguage and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, F

7、rance, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Eur

8、open de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 60598-2-17:2018 E

9、National forewordThis British Standard is the UK implementation of EN IEC 60598-2-17:2018. It is identical to IEC 60598-2-17:2017. It supersedes BS 4533-102.17:1990, which will be withdrawn on 23 March 2021.The UK participation in its preparation was entrusted to Technical Committee CPL/34/4, Lumina

10、ires.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI S

11、tandards Limited 2018ISBN 978 0 580 89626 2ICS 97.200.10; 29.140.40Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2018.Amendments/corrigenda issued sin

12、ce publicationDate Text affectedBRITISH STANDARDBS EN IEC 60598-2-17:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 60598-2-17 March 2018 ICS 29.140.40; 97.200.10 Supersedes EN 60598-2-17:1989 English Version Luminaires - Part 2-17: Particular requirements - Luminaires for stage lighti

13、ng, television and film studios (outdoor and indoor) (IEC 60598-2-17:2017) Luminaires - Partie 2-17: Exigences particulires - Luminaires pour clairage des scnes de thtre, pour prises de vues de tlvision et de cinma ( lextrieur et lintrieur) (IEC 60598-2-17:2017) Leuchten - Teil 2-17: Besondere Anfor

14、derungen - Leuchten fr Bhnenbeleuchtung, Fernseh- und Film-Studios (auen und innen) (IEC 60598-2-17:2017) This European Standard was approved by CENELEC on 2017-07-04. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Europea

15、n Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versio

16、ns (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical commi

17、ttees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slo

18、vakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 20

19、18 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 60598-2-17:2018 E BS EN IEC 60598-2-17:2018EN IEC 60598-2-17:2018 (E) 2 European foreword The text of document 34D/1275/FDIS, future edition 2 of IEC 60598-2-17, prepared by SC

20、34D “Luminaires“ of IEC/TC 34 “Lamps and related equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 60598-2-17:2018. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical nation

21、al standard or by endorsement (dop) 2018-09-23 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2021-03-23 This document supersedes EN 60598-2-17:1989. Attention is drawn to the possibility that some of the elements of this document may be the subj

22、ect of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For

23、the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this document. Endorsement notice The text of the International Standard IEC 60598-2-17:2017 was approved by CENELEC as a European Standard without any modification. BS EN IEC 60598-2-17:2018EN IEC 60598-2-1

24、7:2018 (E) 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, onl

25、y the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on

26、the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60598-1 + A1 2014 2017 Luminaires - Part 1: General requirements and tests EN 60598-1 (mod) + A1 2015 2018 BS EN IEC 60598-2-17:2018EN IEC 60598-2-17:2018 (E) 4

27、 Annex ZZ (informative) Relationship between this European Standard and the safety objectives of Directive 2014/35/EU 2014 OJ L96 aimed to be covered This European Standard has been prepared under a Commissions standardization request relating to harmonized standards in the field of the Low Voltage

28、Directive, M/511, to provide one voluntary means of conforming to safety objectives of Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonization of the laws of the Member States relating to the making available on the market of electrical equipment d

29、esigned for use within certain voltage limits 2014 OJ L96. Once this standard is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of this standard given in Table ZZ.1 confers, within the limits of the scope of this standard, a presumptio

30、n of conformity with the corresponding safety objectives of that Directive, and associated EFTA regulations. Table ZZ.1 Correspondence between this European Standard and Annex I of Directive 2014/35/EU 2014 OJ L96 Safety objectives of Directive 2014/35/EU Clause(s) / sub-clause(s) of this EN Remarks

31、 / Notes 1. General conditions a) the essential characteristics, the recognition and observance of which will ensure that electrical equipment will be used safely and in applications for which it was made, shall be marked on the electrical equipment, or, if this is not possible, on an accompanying d

32、ocument; 17.6 b) the electrical equipment, together with its component parts, shall be made in such a way as to ensure that it can be safely and properly assembled and connected; All c) the electrical equipment shall be so designed and manufactured as to ensure that protection against the hazards se

33、t out in points 2 and 3 is assured, providing that the equipment is used in applications for which it was made and is adequately maintained. See item 2 and 3 of this table BS EN IEC 60598-2-17:2018EN IEC 60598-2-17:2018 (E) 5 Safety objectives of Directive 2014/35/EU Clause(s) / sub-clause(s) of thi

34、s EN Remarks / Notes 2. Protection against hazards arising from the electrical equipment Measures of a technical nature shall be laid down in accordance with point 1, in order to ensure that: a) persons and domestic animals are adequately protected against the danger of physical injury or other harm

35、 which might be caused by direct or indirect contact; 17.7 17.8 17.9 17.10 17.11 17.12 17.15 b) temperatures, arcs or radiation which would cause a danger, are not produced; 17.7 17.8 17.13 17.15 EMF is not covered c) persons, domestic animals and property are adequately protected against non-electr

36、ical dangers caused by the electrical equipment which are revealed by experience; 17.7 17.8 17.15 d) the insulation is suitable for foreseeable conditions. 17.8 17.14 17.15 3. Protection against hazards which may be caused by external influences on the electrical equipment Technical measures shall b

37、e laid down in accordance with point 1, in order to ensure that the electrical equipment: a) meets the expected mechanical requirements in such a way that persons, domestic animals and property are not endangered; 17.6 17.7 b) is resistant to non-mechanical influences in expected environmental condi

38、tions, in such a way that persons, domestic animals and property are not endangered; 17.14 17.16 BS EN IEC 60598-2-17:2018EN IEC 60598-2-17:2018 (E) 6 Safety objectives of Directive 2014/35/EU Clause(s) / sub-clause(s) of this EN Remarks / Notes c) does not endanger persons, domestic animals and pro

39、perty in foreseeable conditions of overload. 17.7 17.13 17.16 WARNING 1 Presumption of conformity stays valid only as long as a reference to this European Standard is maintained in the list published in the Official Journal of the European Union. Users of this standard should consult frequently the

40、latest list published in the Official Journal of the European Union. WARNING 2 Other Union legislation may be applicable to the product(s) falling within the scope of this standard. BS EN IEC 60598-2-17:2018 2 IEC 60598-2-17:2017 IEC 2017 CONTENTS FOREWORD . 3 17.1 Scope . 5 17.2 Normative reference

41、s 5 17.3 Terms and definitions 5 17.4 General test requirements . 5 17.5 Classification of luminaires 5 17.6 Marking . 5 17.7 Construction 6 17.8 Creepage distances and clearances 8 17.9 Provisions for earthing 8 17.10 Terminals 8 17.11 External and internal wiring . 8 17.12 Protection against elect

42、ric shock . 8 17.13 Endurance tests and thermal tests 8 17.14 Resistance to dust, solid objects and moisture 9 17.15 Insulation resistance, electric strength,touch current and protective conductor current 9 17.16 Resistance to heat, fire and tracking . 9 BS EN IEC 60598-2-17:2018IEC 60598-2-17:2017

43、IEC 2017 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ LUMINAIRES Part 2-17: Particular requirements Luminaires for stage lighting, television and film studios (outdoor and indoor) FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization compris

44、ing all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standar

45、ds, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this prepara

46、tory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizat

47、ions. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of r

48、ecommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation b

49、y any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and