EN IEC 60794-1-31-2018 Optical fibre cables - ParT 1-31 Generic specification - Optical cable elements - Optical fibre ribbon.pdf

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Optical fibre cablesPart 1-31: Generic specification - Optical cable elements - Optical fibre ribbonBS EN IEC 60794131:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 60794-1-31 July 2018 ICS 33.180.10; 33.

2、180.99 English Version Optical fibre cables - Part 1-31: Generic specification - Optical cable elements - Optical fibre ribbon (IEC 60794-1-31:2018) Cbles fibres optiques - Partie 1-31: Spcification intermdiaire pour lments de cbles - Rubans de fibres optiques (IEC 60794-1-31:2018) Lichtwellenleiter

3、kabel - Teil 1-31: Fachgrundspezifikation - LWL-Kabelelemente - LWL-Bandkabel (IEC 60794-1-31:2018) This European Standard was approved by CENELEC on 2018-06-19. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Stan

4、dard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (En

5、glish, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees

6、of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia,

7、 Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CEN

8、ELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 60794-1-31:2018 E National forewordThis British Standard is the UK implementation of EN IEC 60794131:2018. It is identical to IEC 60794131:2018.The UK participation in its preparation

9、 was entrusted to Technical Committee GEL/86/1, Optical fibres and cables.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct a

10、pplication. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 93581 7ICS 33.180.99; 33.180.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and

11、 Strategy Committee on 31 July 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN IEC 60794131:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 60794-1-31 July 2018 ICS 33.180.10; 33.180.99 English Version Optical fibre cables - Part 1-31: Generic

12、specification - Optical cable elements - Optical fibre ribbon (IEC 60794-1-31:2018) Cbles fibres optiques - Partie 1-31: Spcification intermdiaire pour lments de cbles - Rubans de fibres optiques (IEC 60794-1-31:2018) Lichtwellenleiterkabel - Teil 1-31: Fachgrundspezifikation - LWL-Kabelelemente - L

13、WL-Bandkabel (IEC 60794-1-31:2018) This European Standard was approved by CENELEC on 2018-06-19. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up

14、-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by t

15、ranslation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republi

16、c, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United King

17、dom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means rese

18、rved worldwide for CENELEC Members. Ref. No. EN IEC 60794-1-31:2018 E BS EN IEC 60794131:2018EN IEC 60794-1-31:2018 2 European foreword The text of document 86A/1806/CDV, future edition 1 of IEC 60794-1-31, prepared by SC 86A “Fibres and cables“ of IEC/TC 86 “Fibre optics“ was submitted to the IEC-C

19、ENELEC parallel vote and approved by CENELEC as EN IEC 60794-1-31:2018. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2019-03-19 latest date by which the national stand

20、ards conflicting with the document have to be withdrawn (dow) 2021-06-19 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The t

21、ext of the International Standard IEC 60794-1-31:2018 was approved by CENELEC as a European Standard without any modification. BS EN IEC 60794131:2018EN IEC 60794-1-31:2018 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The fo

22、llowing documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOT

23、E 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year I

24、EC 60304 - Standard colours for insulation for low-frequency cables and wires HD 402 S2 - IEC 60793-2-10 - Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres EN 60793-2-10 - IEC 60793-2-50 - Optical fibres - Part 2-50: Product specifications

25、 - Sectional specification for class B single-mode fibres EN 60793-2-50 - IEC 60794-1-1 - Optical fibre cables - Part 1-1: Generic specification - General EN 60794-1-1 - IEC 60794-1-23 - Optical fibre cables - Part 1-23: Generic specification - Basic optical cable test procedures - Cable element tes

26、t methods EN 60794-1-23 - IEC 60794-2 - Optical fibre cables - Part 2: Indoor cables - Sectional specification EN 60794-2 - IEC 60794-3 - Optical fibre cables - Part 3: Outdoor cables - Sectional specification EN 60794-3 - BS EN IEC 60794131:2018This page deliberately left blank 2 IEC 60794-1-31:201

27、8 IEC 2018 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references 5 3 Terms, definitions, symbols and abbreviated terms 5 4 Requirements 6 4.1 General . 6 4.2 Construction . 6 4.2.1 Ribbon structure 6 4.2.2 Optical fibres . 7 4.3 Dimensions . 7 4.4 Mechanical requirements 9 4.4.1 General . 9 4.4.2 S

28、eparability of individual fibres from a ribbon. 10 4.4.3 Ribbon stripping 10 4.4.4 Torsion 10 4.5 Identification of ribbon 10 4.5.1 General . 10 4.5.2 Identification by positional identification . 10 4.5.3 Identification by ribbon coding and fibre colouring . 11 Figure 1 Cross-section of a typical e

29、dge-bonded ribbon (thinner ribbon) 6 Figure 2 Cross-section of a typical encapsulated ribbon (thicker ribbon) 7 Figure 3 Overview of a typical partially-bonded ribbon . 7 Figure 4 Example of cross-sectional drawing illustrating fibre ribbon geometry (4-fibre ribbon) 9 Figure 5 Example of identificat

30、ion by means of colour coding and positioning 11 Table 1 Maximum dimensions of optical fibre ribbons for a typical 250 m coating fibre . 8 2 IEC 60794-1-31:2018 IEC 2018 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references 5 3 Terms, definitions, symbols and abbreviated terms 5 4 Requirements 6 4.

31、1 General . 6 4.2 Construction . 6 4.2.1 Ribbon structure 6 4.2.2 Optical fibres . 7 4.3 Dimensions . 7 4.4 Mechanical requirements 9 4.4.1 General . 9 4.4.2 Separability of individual fibres from a ribbon. 10 4.4.3 Ribbon stripping 10 4.4.4 Torsion 10 4.5 Identification of ribbon 10 4.5.1 General .

32、 10 4.5.2 Identification by positional identification . 10 4.5.3 Identification by ribbon coding and fibre colouring . 11 Figure 1 Cross-section of a typical edge-bonded ribbon (thinner ribbon) 6 Figure 2 Cross-section of a typical encapsulated ribbon (thicker ribbon) 7 Figure 3 Overview of a typica

33、l partially-bonded ribbon . 7 Figure 4 Example of cross-sectional drawing illustrating fibre ribbon geometry (4-fibre ribbon) 9 Figure 5 Example of identification by means of colour coding and positioning 11 Table 1 Maximum dimensions of optical fibre ribbons for a typical 250 m coating fibre . 8 BS

34、 EN IEC 60794131:2018IEC 60794-1-31:2018 IEC 2018 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ OPTICAL FIBRE CABLES Part 1-31: Generic specification Optical cable elements Optical fibre ribbon FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardiz

35、ation comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes Internat

36、ional Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in

37、 this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the

38、two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have

39、the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misint

40、erpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding nationa

41、l or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services car

42、ried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Co

43、mmittees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn

44、 to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not b

45、e held responsible for identifying any or all such patent rights. International Standard IEC 60794-1-31 has been prepared by subcommittee SC86A: Fibres and cables, of IEC technical committee 86: Fibre optics. The text of this International Standard is based on the following documents: CDV Report on

46、voting 86A/1806/CDV 86A/1840/RVC Full information on the voting for the approval of this International Standard can be found in the report on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directives, Part 2. BS EN IEC 60794131:2018 4 IEC 60794-1-3

47、1:2018 IEC 2018 A list of all parts in the IEC 60794 series, published under the general title Optical fibre cables, can be found on the IEC website. The committee has decided that the contents of this document will remain unchanged until the stability date indicated on the IEC website under “http:/

48、webstore.iec.ch“ in the data related to the specific document. At this date, the document will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. IMPORTANT The colour inside logo on the cover page of this publi

49、cation indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. BS EN IEC 60794131:2018IEC 60794-1-31:2018 IEC 2018 5 OPTICAL FIBRE CABLES Part 1-31: Generic specification Optical cable elements Optical fibre ribbon 1 Scope This part of IEC 60794, which is a generic specification, covers optical fibre ri