EN IEC 62561-2-2018 Lightning protection system components (LPSC) - PART 2 Requirements for conductors and earth electrodes.pdf

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Lightning protection system components (LPSC)Part 2: Requirements for conductors and earth electrodes (IEC 62561-2:2018)BS EN IEC 62561-2:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 62561-2 March 2018 I

2、CS 29.020; 91.120.40 Supersedes EN 62561-2:2012 English Version Lightning protection system components (LPSC) - Part 2: Requirements for conductors and earth electrodes (IEC 62561-2:2018) Composants des systmes de protection contre la foudre (CSPF) - Partie 2: Exigences pour les conducteurs et les l

3、ectrodes de terre (IEC 62561-2:2018) Blitzschutzsystembauteile (LPSC) - Teil 2: Anforderungen an Leiter und Erder (IEC 62561-2:2018) This European Standard was approved by CENELEC on 2018-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditi

4、ons for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exis

5、ts in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the nati

6、onal electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Por

7、tugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Sci

8、ence 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 62561-2:2018 E National forewordThis British Standard is the UK implementation of EN IEC 62561-2:2018. It is identical to IEC 62561-2:2018. It superse

9、des BS EN 62561-2:2012, which will be withdrawn on 1 March 2021.The UK participation in its preparation was entrusted to Technical Committee GEL/81, Protection against lightning.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does no

10、t purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 90950 4ICS 91.120.40; 29.020Compliance with a British Standard cannot confer immunity from

11、legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN IEC 62561-2:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 625

12、61-2 March 2018 ICS 29.020; 91.120.40 Supersedes EN 62561-2:2012 English Version Lightning protection system components (LPSC) - Part 2: Requirements for conductors and earth electrodes (IEC 62561-2:2018) Composants des systmes de protection contre la foudre (CSPF) - Partie 2: Exigences pour les con

13、ducteurs et les lectrodes de terre (IEC 62561-2:2018) Blitzschutzsystembauteile (LPSC) - Teil 2: Anforderungen an Leiter und Erder (IEC 62561-2:2018) This European Standard was approved by CENELEC on 2018-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stip

14、ulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This Europ

15、ean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC mem

16、bers are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, No

17、rway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Cent

18、re: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 62561-2:2018 E BS EN IEC 62561-2:2018EN IEC 62561-2:2018 (E) 2 European foreword The text of document 81/577/FDIS, future edition 2 o

19、f IEC 62561-2, prepared by IEC/TC 81 “Lightning protection“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 62561-2:2018. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national

20、standard or by endorsement (dop) 2018-12-01 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2021-03-01 This document supersedes EN 62561-2:2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of

21、 patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62561-2:2018 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the foll

22、owing notes have to be added for the standards indicated: IEC 62305-1 NOTE Harmonized as EN 62305-1. ISO 1460 NOTE Harmonized as EN ISO 1460. ISO 1461 NOTE Harmonized as EN ISO 1461. BS EN IEC 62561-2:2018EN IEC 62561-2:2018 (E) 3 Annex ZA (normative) Normative references to international publicatio

23、ns with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the ref

24、erenced document (including any amendments) applies. NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available h

25、ere: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60068-2-52 1996 Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution) EN 60068-2-52 1996 IEC 62305-3 - Protection against lightning - Part 3: Physical damage to structures and life hazard EN 62305-3

26、 - IEC 62305-4 - Protection against lightning - Part 4: Electrical and electronic systems within structures EN 62305-4 - IEC 62561-1 (mod) 2012 Lightning Protection System Components (LPSC) - Part 1: Requirements for connection components EN 62561-1 2012 ISO 2178 - Non-magnetic coatings on magnetic

27、substrates - Measurement of coating thickness - Magnetic method EN ISO 2178 - ISO 6892-1 - Metallic materials - Tensile testing - Part 1: Method of test at room temperature EN ISO 6892-1 - ISO 6957 1988 Copper alloys; ammonia test for stress corrosion resistance - - ISO 6988 1985 Metallic and other

28、non-organic coatings - Sulfur dioxide test with general condensation of moisture EN ISO 6988 1994 BS EN IEC 62561-2:2018This page deliberately left blankIEC 62561-2 Edition 2.0 2018-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Lightning protection system components (LPSC) Part 2: Requirements for

29、conductors and earth electrodes Composants des systmes de protection contre la foudre (CSPF) Partie 2: Exigences pour les conducteurs et les lectrodes de terre INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 29.020; 91.120.40 ISBN 978-2-8322-5265-9 Registered

30、 trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur

31、agr. IEC 62561-2 Edition 2.0 2018-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Lightning protection system components (LPSC) Part 2: Requirements for conductors and earth electrodes Composants des systmes de protection contre la foudre (CSPF) Partie 2: Exigences pour les conducteurs et les lectrod

32、es de terre INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 29.020; 91.120.40 ISBN 978-2-8322-5265-9 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that yo

33、u obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. BS EN IEC 62561-2:2018 2 IEC 62561-2:2018 IEC 2018 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms and defini

34、tions 7 4 Requirements 9 4.1 General . 9 4.2 Documentation 9 4.3 Air-termination conductors, air-termination rods, earth lead-in rods and down-conductors . 9 4.4 Earth electrodes 11 4.4.1 General . 11 4.4.2 Earth rods 11 4.4.3 Couplers for earth rods 11 4.4.4 Earth conductors and earth plates . 12 4

35、.5 Marking . 12 5 Tests . 14 5.1 General conditions for tests 14 5.2 Conductors, air-termination rods, earth lead-in rods and earth electrodes (except earth rods) 14 5.2.1 General . 14 5.2.2 Test for thickness of coating 15 5.2.3 Bend and adhesion test for coated conductors . 16 5.2.4 Environmental

36、test for coated materials . 16 5.2.5 Electrical resistivity test . 16 5.2.6 Tensile test 17 5.3 Earth rods . 17 5.3.1 General . 17 5.3.2 Test for thickness of coating on earth rods 17 5.3.3 Adhesion test . 17 5.3.4 Bend test . 18 5.3.5 Environmental test for coated earth rods . 19 5.3.6 Electrical r

37、esistivity test . 19 5.3.7 Tensile strength test 19 5.3.8 Test for yield/tensile ratio 20 5.4 Couplers for earth rods . 20 5.4.1 General . 20 5.4.2 Compression test by mechanical means 20 5.4.3 Environmental test . 22 5.4.4 Electrical test . 22 5.4.5 Tensile strength test 22 5.5 Marking test 22 5.5.

38、1 General conditions for tests . 22 5.5.2 Acceptance criteria 22 6 Electromagnetic compatibility (EMC) . 23 7 Structure and content of the test report 23 7.1 General . 23 BS EN IEC 62561-2:2018IEC 62561-2:2018 IEC 2018 3 7.2 Report identification 23 7.3 Specimen description 23 7.4 Conductor . 24 7.5

39、 Standards and references . 24 7.6 Test procedure 24 7.7 Testing equipment, description . 24 7.8 Measuring instruments description 24 7.9 Results and parameters recorded . 24 7.10 Statement of pass/fail . 24 Annex A (normative) Environmental test for conductors, air-termination rods and earth lead-i

40、n rods . 25 A.1 General . 25 A.2 Salt mist treatment 25 A.3 Humid sulphurous atmosphere treatment 25 A.4 Ammonia atmosphere treatment 25 Annex B (normative) Electrical test 26 B.1 General . 26 B.2 Acceptance criteria . 26 Annex C (normative) Requirements for conductors 27 Annex D (normative) Require

41、ments for earth electrodes 28 Annex E (normative) Flow chart of tests for air-termination conductors, air-termination rods, earth lead-in rods, down-conductors, earth conductors and earth plates, see Figure E.1 . 29 Annex F (normative) Flow chart of tests for earth rods . 30 Annex G (normative) Flow

42、 chart of tests of couplers for earth rods 31 Bibliography 32 Figure 1 Coating measurements around the circumference of a round conductor . 15 Figure 2 Coating measurements of a plate conductor . 15 Figure 3 Typical test arrangement for adhesion test . 18 Figure 4 Definitions of upper yield strength

43、 ReHand tensile strength Rm20 Figure 5 Typical test arrangement for the compression test by mechanical means . 21 Figure E.1 Flow chart of tests for air-termination conductors, air-termination rods, earth lead-in rods, down-conductors, earth conductors and earth plates . 29 Figure F.1 Flow chart of

44、tests for earth rods . 30 Figure G.1 Flow chart of tests of couplers for earth rods 31 Table 1 Material, configuration and cross-sectional area of air-termination conductors, air-termination rods, earth lead-in rodsgand down-conductors 10 Table 2 Mechanical and electrical characteristics of air-term

45、ination conductors, air-termination rods, earth lead-in rods, down-conductors and earth electrodes . 11 Table 3 Material, configuration and cross-sectional area of earth electrodes 13 Table B.1 Lightning impulse current (Iimp) parameters 26 Table C.1 Summary of requirements for various elements test

46、ed according to Table 1 and Table 2 27 Table D.1 Summary of requirements for various elements tested according to Table 2 and Table 3 28 BS EN IEC 62561-2:2018 4 IEC 62561-2:2018 IEC 2018 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) Part 2: Requirements f

47、or conductors and earth electrodes FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all question

48、s concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)“

49、). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The for