EN IEC 62613-2-2018 Plugs socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-systems) - Part 2 Dimensional compatibility and inter.pdf

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-systems)Part 2: Dimensional compatibility and interchangeability requirements for accessories to be used by various types of shipsB

2、S EN IEC 62613-2:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 62613-2 March 2018 ICS 29.120.30 English Version Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-systems) - Part 2: Dimensional compatibility and interchangeability requirements for

3、accessories to be used by various types of ships (IEC 62613-2:2016) Prises de courant et connecteurs de navires pour les systmes haute tension de raccordement des navires quai - Partie 2: Rgles dimensionnelles de compatibilit et dinterchangeabilit pour les appareils destins tre utiliss par divers ty

4、pes de navires (IEC 62613-2:2016) Stecker, Steckdosen und Schiffssteckvorrichtungen fr Hochspannungs-Landanschlusssysteme (HVSC-Systeme) - Teil 2: Anforderungen an die Austauschbarkeit von Steckvorrichtungen, die an verschiedenen Schiffstypen anzuwenden sind (IEC 62613-2:2016) This European Standard

5、 was approved by CENELEC on 2018-03-05. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning

6、such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member i

7、nto its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of

8、 Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardizat

9、ion Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 62613

10、-2:2018 E National forewordThis British Standard is the UK implementation of EN IEC 626132:2018. It is identical to IEC 626132:2016. It supersedes BS IEC 626132:2016, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee PEL/23/4, Protected type plugs and so

11、ckets.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI

12、Standards Limited 2018ISBN 978 0 580 52479 0ICS 29.120.30Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2016.Amendments/corrigenda issued since pub

13、licationDate Text affected30 April 2018 This corrigendum renumbers BS IEC 626132:2016 as BS EN IEC 626132:2018BRITISH STANDARDBS EN IEC 62613-2:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 62613-2 March 2018 ICS 29.120.30 English Version Plugs, socket-outlets and ship couplers for hi

14、gh-voltage shore connection systems (HVSC-systems) - Part 2: Dimensional compatibility and interchangeability requirements for accessories to be used by various types of ships (IEC 62613-2:2016) Prises de courant et connecteurs de navires pour les systmes haute tension de raccordement des navires qu

15、ai - Partie 2: Rgles dimensionnelles de compatibilit et dinterchangeabilit pour les appareils destins tre utiliss par divers types de navires (IEC 62613-2:2016) Stecker, Steckdosen und Schiffssteckvorrichtungen fr Hochspannungs-Landanschlusssysteme (HVSC-Systeme) - Teil 2: Anforderungen an die Austa

16、uschbarkeit von Steckvorrichtungen, die an verschiedenen Schiffstypen anzuwenden sind (IEC 62613-2:2016) This European Standard was approved by CENELEC on 2018-03-05. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

17、 Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official version

18、s (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical commit

19、tees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slov

20、akia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 201

21、8 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 62613-2:2018 E BS EN IEC 62613-2:2018EN IEC 62613-2:2018 (E) 2 European foreword This document EN IEC 62613-2:2018 consists of the text of IEC 62613-2:2016 prepared by SC 23H “Pl

22、ugs, Socket-outlets and Couplers for industrial and similar applications, and for Electric Vehicles“ of IEC/TC 23 “Electrical accessories“. The following dates are fixed: latest date by which this document has to be implemented at national level by publication of an identical national standard or by

23、 endorsement (dop) 2019-03-05 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2021-03-05 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible f

24、or identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association. Endorsement notice The text of the International Standard IEC 62613-2:2016 was approved by CENELEC as a European Standard

25、 without any modification. BS EN IEC 62613-2:2018EN IEC 62613-2:2018 (E) 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content consti

26、tutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod)

27、, the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Annex ZA of EN 62613-1:2018 applies, except as follows: Publication Year Title EN/HD Year Addition: IEC 62613-1 2011 Plugs, socket-outl

28、ets and ship couplers for high-voltage shore connection systems (HVSC-Systems) - Part 1: General requirements EN 62613-1 2018 BS EN IEC 62613-2:2018 2 IEC 62613-2:2016 IEC 2016 CONTENTS FOREWORD . 4 INRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms and definitions 7 4 General . 7 5 Standard

29、 ratings 7 6 Classification . 7 7 Marking . 7 8 Dimensions 7 9 Protection against electric shock . 8 10 Provision for Earthing 8 11 Terminals and terminations 8 12 Locking devices and interlocks 8 13 Resistance to ageing of rubber and thermoplastic material 8 14 General construction . 8 15 Construct

30、ion of socket-outlets and ship inlets 8 16 Construction of ship connectors . 8 17 Construction of plugs . 8 18 Degrees of protection 8 19 Insulation resistance, dielectric withstand and partial discharge tests 8 20 Normal operation . 9 21 Temperature rise . 9 22 Flexible cables and their connection

31、9 23 Mechanical strength 9 24 Screws, current-carrying parts and connections . 9 25 Resistance to heat, to fire and to tracking 9 26 Corrosion and resistance to rusting . 9 27 Conditional short-circuit current withstand test . 9 28 Electromagnetic compatibility 9 Annex A (normative) Standard sheets

32、A: 7,2 kV 350A three-phase accessories with two IP0 pilot contacts 10 A.1 Socket-outlet. 10 A.2 Plug top 11 A.3 Ship connector top 12 A.4 Ship inlet 13 Annex B (normative) Standard sheets B: 7,2 kV 350A three-phase accessories with two IP2X pilot contacts . 14 B.1 Socket-outlet. 14 B.2 Plug top 15 B

33、.3 Ship connector top 16 B.4 Ship inlet 17 BS EN IEC 62613-2:2018IEC 62613-2:2016 IEC 2016 3 Annex C (normative) Standard sheets C: 7,2 kV 350 A three-phase accessories with three IP2X pilot contacts . 18 C.1 Socket-outlet. 18 C.2 Plug top 19 C.3 Ship connector top 20 C.4 Ship inlet 21 Annex D (norm

34、ative) Standard sheets D: 12 kV 500 A three-phase accessories with two IP0 pilot contacts 22 D.1 Socket-outlet. 22 D.2 Plug top 23 D.3 Ship connector top 24 D.4 Ship inlet 25 Annex E (normative) Standard sheets E: 12 kV 500 A three-phase accessories with two IP2X Pilot contacts . 26 E.1 Socket-outle

35、t. 26 E.2 Plug top 27 E.3 Ship connector top 28 E.4 Ship inlet 29 Annex F (normative) Standard sheets F 12 kV 500 A three-phase accessories with three IP2X pilot contacts . 30 F.1 Socket-outlet. 30 F.2 Plug top 31 F.3 Ship connector top 32 F.4 Ship inlet 33 Annex G (normative) Standard sheets G: 12

36、kV 500 A three-phase accessories with two pilot contacts 34 G.1 Socket-outlet. 34 G.2 Plug top 35 G.3 Ship connector top 36 G.4 Ship inlet 37 Annex H (normative) Standard sheets H: 7,2 kV 250 A single-pole (neutral) accessories 38 H.1 Socket-outlet. 38 H.2 Plug top 39 H.3 Ship connector top 39 H.4 S

37、hip inlet 40 Annex I (normative) Standard sheets I: 7,2 kV 350 A three-phase accessories with three IP0 pilot contacts . 41 I.1 Socket-outlet. 41 I.2 Plug top 42 I.3 Ship connector top 43 I.4 Ship inlet 44 Annex J (normative) Standard sheets J: 12 kV 500 A three-phase accessories with seven pilot co

38、ntacts 45 J.1 Socket-outlet. 45 J.2 Plug top 46 J.3 Ship connector top 47 J.4 Ship inlet 48 BS EN IEC 62613-2:2018 4 IEC 62613-2:2016 IEC 2016 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ PLUGS, SOCKET-OUTLETS AND SHIP COUPLERS FOR HIGH-VOLTAGE SHORE CONNECTION SYSTEMS (HVSC-SYSTEMS) Part 2: Dimensio

39、nal compatibility and interchangeability requirements for accessories to be used by various types of ships FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). Th

40、e object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specif

41、ications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations

42、liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters ex

43、press, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Comm

44、ittees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC Natio

45、nal Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does

46、not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have

47、 the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoe

48、ver, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publicati

49、ons is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62613-2 has been prepared by subcommittee 23H: Plugs, Socket-outlets and Couplers for industrial and similar applications, and for Electric Vehicles of IEC technical committee 23: Electrical accessories.