EN IEC 62684-2018 Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones.pdf

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephonesBS EN IEC 62684:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 62684 April 2018 ICS 33.070.5

2、0 Supersedes EN 62684:2010 English Version Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones (IEC 62684:2018) Spcifications dinteroprabilit de lalimentation externe commune (EPS) avec des tlphones mobiles permettant lchange de donnes (I

3、EC 62684:2018) Spezifikationen fr die Interoperabilitt eines einheitlichen externen Stromversorgungsgerts (EPS) fr die Anwendung bei datenbertragungsfhigen Mobiltelefonen (IEC 62684:2018) This European Standard was approved by CENELEC on 2018-03-12. CENELEC members are bound to comply with the CEN/C

4、ENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centr

5、e or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status

6、 as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

7、Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnisc

8、he Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 62684:2018 E National forewordThis British Standard is the UK implementation of EN IEC 62684:20

9、18. It is identical to IEC 62684:2018. It supersedes BS EN 62684:2010, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee EPL/100, Audio, video and multimedia systems and equipment.A list of organizations represented on this committee can be obtained on r

10、equest to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 96608 8ICS 33.070.50; 35.100.05; 35.200; 29

11、200Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN IEC 6268

12、4:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 62684 April 2018 ICS 33.070.50 Supersedes EN 62684:2010 English Version Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones (IEC 62684:2018) Spcifications dinteroprabilit de l

13、alimentation externe commune (EPS) avec des tlphones mobiles permettant lchange de donnes (IEC 62684:2018) Spezifikationen fr die Interoperabilitt eines einheitlichen externen Stromversorgungsgerts (EPS) fr die Anwendung bei datenbertragungsfhigen Mobiltelefonen (IEC 62684:2018) This European Standa

14、rd was approved by CENELEC on 2018-03-12. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concernin

15、g such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member

16、 into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic

17、of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardiz

18、ation Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 626

19、84:2018 E BS EN IEC 62684:2018EN IEC 62684:2018 (E) 2 European foreword The text of document 100/2872/CDV, future edition 2 of IEC 62684, prepared by technical area 14: “Interfaces and methods of measurement for personal computing equipment“, of IEC/TC 100: “Audio, video and multimedia systems and e

20、quipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 62684:2018. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-12-12 latest d

21、ate by which the national standards conflicting with the document have to be withdrawn (dow) 2021-03-12 This document supersedes EN 62684:2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible

22、for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association. Endorsement notice The text of the International Standard IEC 62684:2018 was approved by CENELEC as a European Standard

23、without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 62680-1-2 NOTE Harmonized as EN 62680-1-2. IEC 62680-1-3 NOTE Harmonized as EN 62680-1-3. IEC 63002 NOTE Harmonized as EN 63002. BS EN IEC 62684:2018EN IEC 62684

24、2018 (E) 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only

25、 the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on

26、the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60950-1 - Information technology equipment - Safety - Part 1: General requirements EN 60950-1 - IEC 62368-1 - Audio/video, information and communication technol

27、ogy equipment - Part 1: Safety requirements EN 62368-1 - IEC 62680-1-1 - Universal Serial Bus interfaces for data and power Part 1-1:Universal Serial Bus interfaces - common components - USB Battery Charging Specification, Revision 1.2 (TA 14) EN 62680-1-1 - IEC 62680-2-1 2015 Universal Serial Bus i

28、nterfaces for data and power Part 2-1: Universal Serial Bus Specification, Revision 2.0 (TA 14) - - IEC 62680-2-2 - Universal Serial Bus interfaces for data and power Part 2-2: Universal Serial Bus - Micro-USB Cables and Connectors Specification, Revision 1.01 (TA 14) EN 62680-2-2 - BS EN IEC 62684:

29、2018This page deliberately left blank 2 IEC 62684:2018 IEC 2018 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references 5 3 Terms, definitions and abbreviated terms 5 3.1 Terms and definitions 5 3.2 Abbreviated terms . 6 4 EPS specification 6 4.1 DC plug connector specification 6 4.2 AC input charact

30、eristic 6 4.3 Environmental specification 7 4.4 DC output characteristics 7 4.5 Protection . 7 4.6 EPS detection . 7 4.7 Reliability 7 5 Testing requirements . 7 5.1 General . 7 5.2 Ripple voltage at the DC output 7 Bibliography 9 2 IEC 62684:2018 IEC 2018 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative

31、 references 5 3 Terms, definitions and abbreviated terms 5 3.1 Terms and definitions 5 3.2 Abbreviated terms . 6 4 EPS specification 6 4.1 DC plug connector specification 6 4.2 AC input characteristic 6 4.3 Environmental specification 7 4.4 DC output characteristics 7 4.5 Protection . 7 4.6 EPS dete

32、ction . 7 4.7 Reliability 7 5 Testing requirements . 7 5.1 General . 7 5.2 Ripple voltage at the DC output 7 Bibliography 9 BS EN IEC 62684:2018IEC 62684:2018 IEC 2018 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ INTEROPERABILITY SPECIFICATIONS OF COMMON EXTERNAL POWER SUPPLIES (EPS) FOR USE WITH D

33、ATA-ENABLED MOBILE TELEPHONES FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions con

34、cerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Th

35、eir preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates

36、closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the re

37、levant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that th

38、e technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maxim

39、um extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies p

40、rovide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC

41、or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expe

42、nses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Atte

43、ntion is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62684 has been prepared by technical area 14: Interfaces and methods of

44、 measurement for personal computing equipment, of IEC technical committee 100: Audio, video and multimedia systems and equipment. This second edition cancels and replaces the first edition published in 2011. This edition constitutes a technical revision. This edition includes the following significa

45、nt technical changes with respect to the previous edition: a) Clause 1 is modified to include updated references to IEC Universal Serial Bus interface standards; b) Clause 2 is expanded to include references to IEC Universal Serial Bus interface standards; c) Subclause 4.1 is expanded to include req

46、uirements for non USB Micro-B plug DC plug connectors; BS EN IEC 62684:2018 4 IEC 62684:2018 IEC 2018 d) Subclause 4.4 is modified to remove obsolete requirements for common mode noise and reference requirements of IEC Universal Serial Bus interface standards; e) Subclause 4.5 is modified to referen

47、ce appropriate safety standards. The text of this standard is based on the following documents: CDV Report on voting 100/2872/CDV 100/2966/RVC Full information on the voting for the approval of this International Standard can be found in the report on voting indicated in the above table. This docume

48、nt has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this document will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific document. At this date, th

49、e document will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. BS EN IEC 62684:2018IEC 62684:2018 IEC 2018 5 INTEROPERABILITY SPECIFICATIONS OF COMMON EXTERNAL POWER SUPPLIES (EPS) FOR USE WITH DATA-ENABLED MOBILE TELEPHONES 1 Scope This document specifies the interoperability of common external power supplies for use with data-enabled mobile telephones. It defines the common charg