EN ISO 15612-2018 Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure.pdf

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure specificationBS EN ISO 15612:2018National forewordThis British Standard is the UK

2、implementation of EN ISO 15612:2018. It is identical to ISO 15612:2018. It supersedes BS EN ISO 15612:2004, which is withdrawn.BSI, as a member of CEN, is obliged to publish EN ISO 15612:2018 as a British Standard. However, attention is drawn to the fact that during the development of this standard,

3、 the UK committee voted against its approval.When a standard welding procedure specification (SWPS) is applied, the user follows a welding procedure specification based on welding procedure qualification tests carried out by another organisation. Therefore, the user does not benefit from the experie

4、nce acquired through the development and qualification of the welding procedure specification itself. As a consequence the UK committee is of the opinion that the application of SWPSs should be limited to parent material groups and thicknesses that are simple to weld and tolerant to deviations to th

5、e specified welding variables.The UK committee is particularly concerned with the limits on the use of SWPSs specified in EN ISO 15612:2018 for parent material thickness (Clause 4.2.2) and parent material groups (Clause 4.2.4). Caution is required to avoid detrimental metallurgical effects when SWPS

6、s are applied for welds between ISO/TR 15608 parent material groups 1.2, 1.3, 11.1, 22.1 and 22.2 and with parent material thickness(es) in the range 20-50 mm.In addition to this standard, the UK committee recommends consulting BS EN ISO 15614-1:2017 as an additional source of information.The UK par

7、ticipation in its preparation was entrusted to Technical Committee WEE/36, Qualification of welding personnel and welding procedures.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provis

8、ions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 92991 5ICS 25.160.10Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was publishe

9、d under the authority of the Standards Policy and Strategy Committee on 31 July 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN ISO 15612:2018EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN ISO 15612July 2018ICS 25.160.10 Supersedes EN ISO 15612:2004EUROP

10、EAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGCEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2018 CEN Ref. No. EN ISO 15612:2018: EAll rights of exploitation in any form and by any means reserved worldwide for CEN national MembersSpeci

11、fication and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure (ISO 15612:2018)Descriptif et qualification dun mode opratoire de soudage pour les matriaux mtalliques - Qualification par rfrence un mode opratoire de soudage standard

12、 (ISO 15612:2018)Anforderung und Qualifizierung von Schweiverfahren fr metallische Werkstoffe - Qualifizierung durch Einsatz eines Standardschweiverfahrens (ISO 15612:2018)This European Standard was approved by CEN on 24 June 2018.CEN members are bound to comply with the CEN/CENELEC Internal Regulat

13、ions which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

14、This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.CEN me

15、mbers are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Port

16、ugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.English VersionEN ISO 15612:2018 (E)European forewordThis document (EN ISO 15612:2018) has been prepared by Technical Committee ISO/TC 44 “Welding and allied processes“ in collaboration with Technical Co

17、mmittee CEN/TC 121 “Welding and allied processes” the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2019, and conflicting national standards shall be

18、withdrawn at the latest by January 2019.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.This document supersedes EN ISO 15612:2004.According to the CE

19、N-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hunga

20、ry, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.Endorsement noticeThe text of ISO 15612:2018 has been approved by CEN as EN ISO 15612:2018 without

21、any modification.iiBS EN ISO 15612:2018ISO 15612:2018Foreword ivIntroduction v1 Scope .12 Normative references 13 Terms and definitions .14 Limits on use of and publication of an SWPS 24.1 General . 24.2 Limits on the use of SWPSs 24.2.1 General 24.2.2 Parent material thickness 24.2.3 Parent materia

22、l 35 Adoption of an SWPS 35.1 General . 35.2 Related to the user of an SWPS . 36 Validity 47 Preparation and documentation .4Bibliography 5 ISO 2018 All rights reserved iiiContents PageBS EN ISO 15612:2018ISO 15612:2018ForewordISO (the International Organization for Standardization) is a worldwide f

23、ederation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that co

24、mmittee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The procedures used to develop this document

25、 and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives,

26、Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of

27、 the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the voluntary nature of stan

28、dards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.This document was prep

29、ared by Technical Committee ISO/TC 44, Welding and allied processes, Subcommittee SC 10, Quality management in the field of welding.This second edition cancels and replaces the first edition (ISO 15612:2004), which has been technically revised. The main changes compared to the previous edition are a

30、s follows: the Introduction has been revised; clarification on how and when an SWPS may be used has been added throughout the document; limits on the use of SWPSs (Clause 4) have been updated.Requests for official interpretations of any aspect of this document should be directed to the Secretariat o

31、f ISO/TC 44/SC 10 via your national standards body. A complete listing of these bodies can be found at www.iso.org.iv ISO 2018 All rights reservedBS EN ISO 15612:2018ISO 15612:2018IntroductionThis document comprises part of a matrix of standards for the specification and qualification of welding pro

32、cedures as given in ISO 15607. It permits a manufacturer to adopt a welding procedure specification qualified and published as a standard welding procedure specification (SWPS) by a different organization. ISO 2018 All rights reserved vBS EN ISO 15612:2018This page deliberately left blankSpecificati

33、on and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure specification1 ScopeThis document: specifies how a user can follow a standard welding procedure specification (SWPS) based on welding procedure qualification tests performed

34、by a different organization; specifies the range for the use of SWPSs in accordance with ISO 15607; specifies the requirements for qualification of welding procedures to be issued as SWPSs; and specifies the requirements for organizations adopting SWPSs.The use of this document can be restricted by

35、an application standard or a specification.This document is applicable to welding of steels and aluminium and its alloys (see 4.1).All new standard welding procedure qualifications are to be carried out in accordance with this document from the date of its issue. However, this document does not inva

36、lidate previous standard welding procedure qualifications made to former standards, specifications or previous editions of this document.2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document

37、 For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 9606-1, Qualification testing of welders Fusion welding Part 1: SteelsISO 9606-2, Qualification test of welders Fusion welding Part 2:

38、Aluminium and aluminium alloysISO 14731, Welding coordination Tasks and responsibilitiesISO 14732, Welding personnel Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materialsISO 15607, Specification and qualification of welding procedures

39、for metallic materials General rulesISO 15609 (all parts), Specification and qualification of welding procedures for metallic materials Welding procedure specificationISO 15614 (all parts), Specification and qualification of welding procedures for metallic materials Welding procedure testISO/TR 1849

40、1, Welding and allied processes Guidelines for measurement of welding energies3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 15607, ISO/TR 18491 and the following apply.INTERNATIONAL STANDARD ISO 15612:2018 ISO 2018 All rights reserved 1BS EN ISO 156

41、12:2018ISO 15612:2018ISO and IEC maintain terminological databases for use in standardization at the following addresses: ISO Online browsing platform: available at https:/www.iso.org/obp IEC Electropedia: available at http:/www.electropedia.org/3.1standard welding procedure specificationSWPSwelding

42、 procedure specification qualified and issued by one organization for adoption by a user3.2organizationentity responsible for the development, qualification and publication of a standard welding procedure specification (SWPS) (3.1)3.3usermanufacturer that produces welded joints (shop or site) follow

43、ing an SWPS (3.1)Note 1 to entry: The SWPS is one that has been adopted in accordance with Clause 5.4 Limits on use of and publication of an SWPS4.1 GeneralAn SWPS shall be developed by an organization based on one or more Welding Procedure Qualification Records (WPQRs) qualified in accordance with

44、ISO 15614-1 level 2 or ISO 15614-2.SWPSs qualified to other standards may be used if they meet the technical requirements of ISO 15614-1 level 2 or ISO 15614-2.The SWPS shall specify the ranges for all the relevant variables in accordance with the relevant part of ISO 15609.The organization may spec

45、ify additional requirements in an SWPS it believes are necessary to follow to ensure suitable production joint weld quality. For example: joint preparation method, details, and fit-up tolerances; restricted welding position(s); welding consumable, including manufacturer and trade name where impact t

46、esting is required; power source manufacturer and type; preheating and interpass temperature method and control (see ISO/TR 17671-1, ISO/TR 17671-2 and ISO 13916); repair welding.4.2 Limits on the use of SWPSs4.2.1 GeneralSWPSs shall not exceed the requirements given in 4.2.2 and 4.2.3.4.2.2 Parent

47、material thicknessSWPSs shall not be issued for material thickness over 50 mm.2 ISO 2018 All rights reservedBS EN ISO 15612:2018ISO 15612:20184.2.3 Parent materialThis document is applicable to the ISO/TR 15608 parent material groups shown in Table 1.Table 1 Applicable ISO/TR 15608 parent material g

48、roupsSteel Aluminium and its alloys1.1, 1.2 and 1.3 2111.1 22.18.1 22.2Joints between dissimilar material groups are not permitted, except for: any combination between subgroup 1.1, 1.2 and 1.3 and subgroup 11.1; combinations between subgroup 22.1 and subgroup 22.2.5 Adoption of an SWPS5.1 GeneralTh

49、e user shall implement welding coordination in accordance with ISO 14731.Alternatively, the user shall qualify one welder or welding operator in accordance with ISO 9606-1, ISO 9606-2 or ISO 14732, or technically equivalent standards, following the SWPS to demonstrate a minimum level of competence in welding oversight within the users organization. The welders or welding operators qualification certificate shall include the SWPS used for qualification.5.2 Related to the user of an SWPS5.2.1 The user of an SWPS