EN ISO 21225-1-2018 Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 1 Replacement on the line by pipe bursting an.pdf

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Plastics piping systems for the trenchless replacement of underground pipeline networksPart 1: Replacement on the line by pipe bursting and pipe extraction (ISO 21225-1:2018)BS EN ISO 21225-1:2018National forewordThis B

2、ritish Standard is the UK implementation of EN ISO 21225-1:2018.The UK participation in its preparation was entrusted to Technical Committee PRI/88/3, Rehabilitation of pipeline systems using plastics piping materials and components.A list of organizations represented on this committee can be obtain

3、ed on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 94222 8ICS 23.040.20; 23.040.45; 91.

4、140.80Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN ISO 2122

5、5-1:2018EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN ISO 212251May 2018ICS 23.040.20; 23.040.45; 91.140.80EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGCENCENELEC Management Centre: Avenue Marnix 17, B1000 Brussels 2018 CEN Ref. No. EN ISO 212

6、25-1:2018: EAll rights of exploitation in any form and by any means reserved worldwide for CEN national MembersPlastics piping systems for the trenchless replacement of underground pipeline networks - Part 1: Replacement on the line by pipe bursting and pipe extraction (ISO 21225-1:2018)Systmes de c

7、analisations en plastique pour le remplacement sans tranche des rseaux de canalisations enterrs - Partie 1: Remplacement sur ligne par clatement de tuyau et extraction de tuyau (ISO 21225-1:2018)Kunststoff-Rohrleitungssysteme zur grabenlosen Erneuerung von erdverlegten Rohrleitungsnetzen - Teil 1: E

8、rneuerung in bisheriger Linienfhrung durch Berstverfahren und Auswechselverfahren (ISO 21225-1:2018)This European Standard was approved by CEN on 1 March 2018.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard th

9、e status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.This European Standard exists in three official versions (English, Frenc

10、h, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, C

11、roatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, T

12、urkey and United Kingdom.English VersionEN ISO 212251:2018 (E)European forewordThis document (EN ISO 21225-1:2018) has been prepared by Technical Committee ISO/TC 138 “Plastics pipes, fittings and valves for the transport of fluids” in collaboration with Technical Committee CEN/TC 155 “Plastics pipi

13、ng systems and ducting systems” the secretariat of which is held by NEN.This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2018, and conflicting national standards shall be withdrawn at the

14、latest by November 2018.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.According to the CEN-CENELEC Internal Regulations, the national standards orga

15、nisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg,

16、 Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.Endorsement noticeThe text of ISO 21225-1:2018 has been approved by CEN as EN ISO 21225-1:2018 without any modification.iiBS EN ISO 21225-1:2018ISO 212251:201

17、8Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 23.1 General . 33.2 Techniques 43.3 Geometrics 53.4 Materials . 63.5 Joints 74 Symbols and abbreviated terms . 74.1 Symbols . 74.2 Abbreviated terms . 85 Design aspects . 86 Material selection 86.1 Pipes and fitti

18、ngs . 86.2 Regional requirements for pipes and fittings . 86.3 Ancillary components . 97 Installation practice 97.1 Preparatory work . 97.2 Storage, handling and transport 97.3 Equipment 107.3.1 General. 107.3.2 Inspection equipment 107.3.3 Lifting equipment .107.3.4 Butt fusion equipment and debead

19、ing equipment107.3.5 Pipe skids/rollers .107.3.6 Winching and rod-pulling equipment 107.3.7 Pipe bursting equipment . 117.3.8 Pipe extraction equipment . 117.3.9 Electrofusion equipment . 127.4 Installation . 127.4.1 General. 127.4.2 Disconnection from the existing pipeline137.5 Process-related insp

20、ection and testing . 137.6 Finishing off 137.7 Reconnection to the existing pipeline system . 138 Fitness for purpose .138.1 General 138.2 Final inspection . 148.3 Pressure testing . 148.4 Disinfection . 148.5 Documentation 14Annex A (normative) Layered pipes .15Annex B (informative) Pipe design con

21、siderations particular to pipe bursting and pipe extraction 16Bibliography .18 ISO 2018 All rights reserved iiiContents PageBS EN ISO 21225-1:2018ISO 212251:2018ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies)

22、. The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non

23、-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are describ

24、ed in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to t

25、he possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO

26、 list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions rel

27、ated to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.This document was prepared by Technical Committee ISO/TC 138, Plastics pipes, fitt

28、ings and valves for the transport of fluids, Subcommittee SC 8, Rehabilitation of pipeline systems.A list of all the parts in the ISO 21225 series can be found on the ISO website.iv ISO 2018 All rights reservedBS EN ISO 21225-1:2018ISO 212251:2018IntroductionSystem standards dealing with the followi

29、ng applications are either available or in preparation for pipeline renovation: The ISO 11296 series: Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks; The ISO 11297 series: Plastics piping systems for renovation of underground drainage and sewerage n

30、etworks under pressure; The ISO 11298 series: Plastics piping systems for renovation of underground water supply networks; The ISO 11299 series: Plastics piping systems for renovation of underground gas supply networks.System standards dealing with all application areas are either available or in pr

31、eparation for trenchless pipeline replacement: The ISO 21225 series: Plastics piping systems for the trenchless replacement of underground pipeline networks.The system standard ISO 21225 comprises: Part 1: Replacement on the line by pipe bursting and pipe extraction (this document); Part 2: Replacem

32、ent off the line by horizontal directional drilling and impact moling.The requirements for technique families are given in ISO 21225-1 and ISO 21225-2 respectively. For complimentary information, see ISO 112951.A consistent structure of clause headings has been adopted for all parts to facilitate di

33、rect comparisons across replacement standards.Figure 1 shows the common part and clause structure and the relationship between ISO 21255 and the system standards for the renovation application areas. ISO 2018 All rights reserved vBS EN ISO 21225-1:2018ISO 212251:2018Figure 1 Technique families and c

34、lause structurevi ISO 2018 All rights reservedBS EN ISO 21225-1:2018Plastics piping systems for the trenchless replacement of underground pipeline networks Part 1: Replacement on the line by pipe bursting and pipe extraction1 ScopeThis document specifies requirements and test methods for pipes and f

35、ittings which are part of plastics piping systems for the trenchless replacement of underground non-pressure and pressure drainage and sewerage networks and underground water and gas supply networks, by means of pipe bursting and pipe extraction.It is applicable to polyethylene (PE) pipes and fittin

36、gs, as manufactured, as well as to the installed replacement system.This document is intended to be used in conjunction with standards applicable for the construction of PE pipeline systems where available.Regarding manufactured pipes it is applicable to three different PE pipe types: PE solid wall

37、single layered pipes (nominal outside diameter, dn), including any identification stripes; PE pipes with co-extruded layers on either or both the outside and inside of the pipe (total outside diameter, dn), as specified in Annex A, where all layers have the same MRS rating; PE pipes (outside diamete

38、r, dn) having a peelable, contiguous, thermoplastics additional layer on the outside of the pipe (“coated pipe”), see Annex A.In addition it is applicable to: jointing of pipe lengths by means of butt fusion joint; jointing of pipe lengths by means of electrofusion joint; fabricated and injection-mo

39、ulded fittings made of PE.Pipes made from other plastics, e.g. glass reinforced plastics (GRP), are outside the scope of this document.2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document.

40、For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 4427 (all parts), Plastics piping systems Polyethylene (PE) pipes and fittings for water supplyISO 4437 (all parts), Plastics piping syst

41、ems for the supply of gaseous fuels Polyethylene (PE)ISO 4633, Rubber seals Joint rings for water supply, drainage and sewerage pipelines Specification for materialsINTERNATIONAL STANDARD ISO 212251:2018 ISO 2018 All rights reserved 1BS EN ISO 21225-1:2018ISO 212251:2018ISO 8772, Plastics piping sys

42、tems for non-pressure underground drainage and sewerage Polyethylene (PE)ISO 12176-1, Plastics pipes and fittings Equipment for fusion jointing polyethylene systems Part 1: Butt fusionISO 12176-2, Plastics pipes and fittings Equipment for fusion jointing polyethylene systems Part 2: ElectrofusionISO

43、 16010, Elastomeric seals Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluidsEN 681-1, Elastomeric seals Material requirements for pipe joint seals used in water and drainage applications Part 1: Vulcanized rubberEN 681-2, Elastomeric seals Materi

44、al requirements for pipe joint seals used in water and drainage applications Part 2: Thermoplastic elastomersEN 681-3, Elastomeric seals Material requirements for pipe joint seals used in water and drainage applications Part 3: Cellular materials of vulcanized rubberEN 681-4, Elastomeric seals Mater

45、ial requirements for pipe joint seals used in water and drainage applications Part 4: Cast polyurethane sealing elementsEN 682, Elastomeric seals Material requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluidsEN 1555-1, Plastics piping systems for the supply of gaseous

46、 fuels Polyethylene (PE) Part 1: GeneralEN 1555-2, Plastics piping systems for the supply of gaseous fuels Polyethylene (PE) Part 2: PipesEN 1555-3, Plastics piping systems for the supply of gaseous fuels Polyethylene (PE) Part 3: FittingsEN 1555-5, Plastics piping systems for the supply of gaseous

47、fuels Polyethylene (PE) Part 5: Fitness for purpose of the systemEN 12201-1, Plastics piping systems for water supply, and for drainage and sewerage under pressure Polyethylene (PE) Part 1: GeneralEN 12201-2, Plastics piping systems for water supply, and for drainage and sewerage under pressure Poly

48、ethylene (PE) Part 2: PipesEN 12201-3, Plastics piping systems for water supply, and for drainage and sewerage under pressure Polyethylene (PE) Part 3: FittingsEN 12201-5, Plastics piping systems for water supply, and for drainage and sewerage under pressure Polyethylene (PE) Part 5: Fitness for pur

49、pose of the systemEN 12666-1, Plastics piping systems for non-pressure underground drainage and sewerage Polyethylene (PE) Part 1: Specifications for pipes, fittings and the system3 Terms and definitionsFor the purposes of this document the following terms and definitions apply.ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at http:/www.electropedia.org/ ISO Online browsing pl