ETSI TS 137 106-2018 LTE User Equipment (UE) requirements for shared spectrum channel access (V15 0 0 3GPP TS 37 106 version 15 0 0 Release 15).pdf

1、 ETSI TS 137 106 V15.0.0 (2018-07) LTE; User Equipment (UE) requirements for shared spectrum channel access (3GPP TS 37.106 version 15.0.0 Release 15) TECHNICAL SPECIFICATION ETSI ETSI TS 137 106 V15.0.0 (2018-07)13GPP TS 37.106 version 15.0.0 Release 15Reference RTS/TSGR-0437106vf00 Keywords LTE ET

2、SI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http

3、/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived d

4、ifference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or

5、 change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupp

6、ortStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authoriz

7、ation of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI registered for the ben

8、efit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TS 137 106 V15.0.0 (2018-07)23GPP TS 37.106 version 15.0.0 Release 15Intellectual Property R

9、ights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Ri

10、ghts (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches,

11、has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tr

12、adenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not con

13、stitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3G

14、PP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present

15、 document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables ex

16、cept when used in direct citation. ETSI ETSI TS 137 106 V15.0.0 (2018-07)33GPP TS 37.106 version 15.0.0 Release 15Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g31 Scope 5g32 References 5g33 Definitions, symbols and abbreviations . 5g33.1 Definitions 5

17、g33.2 Symbols 5g33.3 Abbreviations . 5g34 General . 6g34.1 Relationship between minimum requirements and test requirements 6g34.2 Applicability of minimum requirements 6g35 Channel access procedures . 6g35.1 Uplink channel access procedure . 6g35.1.1 Channel access parameters . 6g35.1.2 Minimum requ

18、irement 6g3Annex A (informative): Change history . 7g3History 8g3ETSI ETSI TS 137 106 V15.0.0 (2018-07)43GPP TS 37.106 version 15.0.0 Release 15Foreword This Technical Specification has been produced by the 3rd Generation Partnership Project (3GPP). The contents of the present document are subject t

19、o continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit

20、 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when edit

21、orial only changes have been incorporated in the document. ETSI ETSI TS 137 106 V15.0.0 (2018-07)53GPP TS 37.106 version 15.0.0 Release 151 Scope The present document establishes the minimum UE RF characteristics for shared spectrum channel access. 2 References The following documents contain provis

22、ions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific r

23、eference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 ITU

24、R Recommendation M.1545: “Measurement uncertainty as it applies to test limits for the terrestrial component of International Mobile Telecommunications-2000“. 3 3GPP TS 36.213: “Physical layer procedures“. 4 3GPP TS 36.101: “User Equipment (UE) radio transmission and reception“. 5 3GPP TS 36.521-1

25、 “Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE) conformance specification; Radio transmission and reception; Part 1: Conformance testing“. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in

26、 3GPP TR 21.905 1 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in 3GPP TR 21.905 1. Channel bandwidth: The RF bandwidth supporting a single E-UTRA RF carrier with the transmission bandwidth configured in the uplink or

27、downlink of a cell. The channel bandwidth is measured in MHz and is used as a reference for transmitter and receiver RF requirements. 3.2 Symbols For the purposes of the present document, the following symbols apply: BWChannelChannel bandwidth 3.3 Abbreviations For the purposes of the present docume

28、nt, the abbreviations given in 3GPP TR 21.905 1 and the following apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in 3GPP TR 21.905 1. BS Base Station E-UTRA Evolved Universal Terrestrial Radio Access PUSCH Physical Uplink

29、 Shared Channel UE User Equipment ETSI ETSI TS 137 106 V15.0.0 (2018-07)63GPP TS 37.106 version 15.0.0 Release 154 General 4.1 Relationship between minimum requirements and test requirements The Minimum Requirements given in this specification make no allowance for measurement uncertainty. The test

30、specification TS 36.521-1 5 Annex F defines Test Tolerances. These Test Tolerances are individually calculated for each test. The Test Tolerances are used to relax the Minimum Requirements in this specification to create Test Requirements. The measurement results returned by the Test System are comp

31、ared - without any modification - against the Test Requirements as defined by the shared risk principle. The Shared Risk principle is defined in ITU-R M.1545 2. 4.2 Applicability of minimum requirements a) In this specification the Minimum Requirements are specified as general requirements and addit

32、ional requirements. Where the Requirement is specified as a general requirement, the requirement is mandated to be met in all scenarios b) For specific scenarios for which an additional requirement is specified, in addition to meeting the general requirement, the UE is mandated to meet the additiona

33、l requirements. c) The requirements in this specification for E-UTRA TDD operating bands apply for downlink and uplink operations using Frame Structure Type 3. 5 Channel access procedures 5.1 Uplink channel access procedure For uplink operation in Band 46 and Band 49, a channel access procedure for

34、PUSCH transmission as described in TS 36.213 3, Clause 15.2.1 is specified. 5.1.1 Channel access parameters Channel access related parameters for PUSCH are listed in Table 5.1.1-1. Table 5.1.1-1: Channel access parameters for PUSCH Parameter Unit Value LBT measurement bandwidth (BW) MHz 20 10 Energy

35、 detection threshold dBm/BW -72 -75 Detection timing microseconds 25 5.1.2 Minimum requirement The UE shall be able to assess whether the medium is busy or idle with at least 90% probability, using a channel access procedure with the parameters in Table 5.1.1-1. ETSI ETSI TS 137 106 V15.0.0 (2018-07

36、)73GPP TS 37.106 version 15.0.0 Release 15Annex A (informative): Change history Change history Date Meeting TDoc CR Rev Cat Subject/Comment New version 2018-02 RAN4#86 R4-1801547 TS skeleton 0.0.1 2018-06 RAN#80 RP-181030 v1.0.0 submitted for plenary approval 1.0.0 2018-06 RAN#80 Approved by plenary Rel-15 spec under change control 15.0.0 ETSI ETSI TS 137 106 V15.0.0 (2018-07)83GPP TS 37.106 version 15.0.0 Release 15History Document history V15.0.0 July 2018 Publication