IEEE C37 06.1-2017 Recommended Practice for Preferred Ratings for High-Voltage ( 1000 volts) AC Circuit Breakers Designated Definite Purpose for Fast Transient Recovery Voltage Rise Times.pdf

1、IEEE Recommended Practice for Preferred Ratings for High-Voltage (1000 volts) AC Circuit Breakers Designated Definite Purpose for Fast Transient Recovery Voltage Rise Times IEEE Std C37.06.1-2017 IEEE Power and Energy Society Sponsored by the Switchgear Committee IEEE 3 Park Avenue New York, NY 1001

2、6-5997 USAIEEE Std C37.06.1-2017 IEEE Recommended Practice for Preferred Ratings for High-Voltage (1000 volts) AC Circuit Breakers Designated Definite Purpose for Fast Transient Recovery Voltage Rise Times Sponsored by the Switchgear Committee of the IEEE Power and Energy Society Approved 6 December

3、 2017 IEEE-SA Standards Board Copyright 2018 IEEE. All rights reserved. 2 Abstract: The preferred ratings of transformer-limited fault duty (fast transient recovery voltage rise times) of indoor and outdoor high-voltage circuit breakers rated above 1000 V for use in commercial, industrial, and utili

4、ty installations are described. Keywords: fast transient recovery voltage rise times, high-voltage circuit breakers, IEEE C37.06.1, transformer-limited fault, transient recovery voltage, TRV The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyr

5、ight 2018 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 6 February 2018. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness

6、 currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply

7、 that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the

8、state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or e

9、ntity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE st

10、andard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABIL

11、ITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE con

12、sensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Copyright 2018 IEEE. All rights reserved. 4 Official statements A statement, writ

13、ten or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, sympos

14、ia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards doc

15、uments are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with

16、 appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating

17、Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is we

18、lcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Comp

19、liance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend

20、 to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of

21、 both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users,

22、 IEEE does not waive any rights in copyright to the documents. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use o

23、nly. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright

24、 Clearance Center. Copyright 2018 IEEE. All rights reserved. 5 Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendme

25、nts, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years o

26、ld and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine wheth

27、er a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For more information about the IEEE SA or I

28、EEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata

29、 periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connectio

30、n therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willi

31、ng or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of A

32、ssurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with s

33、ubmission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Fu

34、rther information may be obtained from the IEEE Standards Association Copyright 2018 IEEE. All rights reserved. 6 Participants At the time this recommended practice was submitted to the IEEE-SA Board for approval, the Revision of C37.06.1 Working Group had the following membership: Sushil Shinde, Ch

35、air Carl Schuetz, Vice Chair Roy Alexander Mauricio Aristizabal Stan Billings Anne Bosma Arben Bufi Chih Chow Lucas Collette Patrick Di Lillo Denis Dufournet Helmut Heiermeier Victor Hermosillo Hua Ying Liu Daniel Schiffbauer Harish Sharma Michael Skidmore Jan Veisker Richard York Xi Zhu The followi

36、ng members of the individual balloting committee voted on this recommended practice. Balloters may have voted for approval, disapproval, or abstention. Roy Alexander Ficheux Arnaud Roy Ayers Thomas Barnes Robert Behl W.J. (Bill) Bergman Jean-Marc Biasse William Bloethe Anne Bosma Jeffrey Bragg Jeffr

37、ey Brogdon Steven Brown Ted Burse Eldridge Byron Paul Cardinal Chih Chow Lucas Collette Michael Crawford Gary Donner Denis Dufournet Kenneth Edwards Sergio Flores Paul Forquer Marcel Fortin Mietek Glinkowski Edwin Goodwin Randall Groves Paul Hamer John Harley Timothy Hayden Jared Hines Werner Hoelzl

38、 William Hurst Todd Irwin Richard Jackson Andrew Jones Yuri Khersonsky James Kinney Boris Kogan Jim Kulchisky Carl Kurinko Chung-Yiu Lam Benjamin Lanz Hua Liu Albert Livshitz R. Long Frank Mayle William McBride Neil Mc Cord Peter Meyer Charles Morse Thomas Mulcahy Jeffrey Nelson Arthur Neubauer Mich

39、ael Newman Nick S. A. Nikjoo T. W. Olsen Lorraine Padden Shawn Patterson Jim Phillips Iulian Profir Moises Ramos Reynaldo Ramos Anthony Ricciuti Thomas Rozek Roderick Sauls Bartien Sayogo Daniel Schiffbauer Nikunj Shah Hamid Sharifnia Devki Sharma Harish Sharma Sushil Shinde Garett Sims Michael Skid

40、more Jeremy Smith Jerry Smith James Stage David Tepen James Van De Ligt Roger Verdolin John Vergis Mark Waldron Keith Wallace Paul Wasacz John Webb Jan Weisker Kenneth White Matthew Williford Larry Yonce Richard York Jian Yu Xi Zhu Copyright 2018 IEEE. All rights reserved. 7 When the IEEE-SA Standar

41、ds Board approved this recommended practice on 6 December 2017, it had the following membership: Jean-Philippe Faure, Chair Gary Hoffman, Vice Chair John D. Kulick, Past Chair Konstantinos Karachalios, Secretary Chuck Adams Masayuki Ariyoshi Ted Burse Stephen Dukes Doug Edwards J. Travis Griffith Mi

42、chael Janezic Thomas Koshy Joseph L. Koepfinger* Kevin Lu Daleep Mohla Damir Novosel Ronald Petersen Annette D. Reilly Robby Robson Dorothy Stanley Adrian Stephens Mehmet Ulema Phil Wennblom Howard Wolfman Yu Yuan *Member Emeritus 8 Copyright 2018 IEEE. All rights reserved. Introduction This introdu

43、ction is not part of IEEE Std C37.06.1-2017, IEEE Recommended Practice for High-Voltage (1000 volts) AC Circuit Breakers Designated Definite Purpose for Fast Transient Recovery Voltage Rise Times. This IEEE recommended practice is a revision of ANSI C37.06.1-2000 (Guide for High-Voltage Circuit Brea

44、kers Rated on a Symmetrical Current Basis Designated “Definite Purpose for Fast Transient Recovery Voltage Rise Times”) and deals with special applications with fast TRV requirements calling for definite purpose circuit breakers with special TRV requirements and for circuit breakers in transformer-l

45、imited fault applications. This document provides preferred values of standard ratings of fast transient recovery voltage rise times. This recommended practice provides (1) preferred interrupting current and TRV values for manufacturers to test their circuit breakers against, and (2) recommended TRV

46、 values for users from which to choose when selecting circuit breakers for these applications. This document takes into account the fact that the highest TRV rates of rise are obtained in TLF (transformer-limited fault) conditions. There might be some cases of TRVs associated with faults near series

47、 reactors with a rate of rise greater than TLF. In such cases the manufacturer should be consulted for circuit breaker suitability. This document also introduces a transformer-limited fault (TLF) current breaking capability, as the current specified would correspond to the actual need in service ins

48、tead of a fixed percentage (10% or 30%) of the rated short circuit current that is in many cases far from the real need. As per CIGRE Technical Brochure 362 B1, 1in the majority of cases it has been found that the TLF current is less than 11 kA and it is not relevant to link the TLF current to 30% o

49、f the rated short-circuit current (63 kA). The revision also includes a change from the 1-cosine to a two-parameter TRV envelope. A range of transformer impedance data (600 examples) ranging from 115 kV to 765 kV was analyzed. The data (expressed as current from infinite source) was spread over large spectrum. ANSI C37.06.1-2000 was initially approved as a “trial-use” guide in 1997, and then approved for more general use as a guide in 2000. The rated transformer-limited fault breaking current is the highest transformer-limited fault current required to be interrupted u