1、 IEC 61290-11-1 Edition 2.0 2008-04 INTERNATIONAL STANDARD NORME INTERNATIONALE Optical amplifiers Test methods Part 11-1: Polarization mode dispersion parameter Jones matrix eigenanalysis (JME) Amplificateurs optiques Mthodes dessais Partie 11-1: Paramtre de dispersion du mode de polarisation Analy
2、se des vecteurs propres de la matrice de Jones (JME) IEC 61290-11-1:2008 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2008 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
3、or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact
4、 the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris
5、 la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit na
6、tional de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards f
7、or all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications:
8、 www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC
9、 publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French,
10、with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ o
11、r contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologie
12、s apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm L
13、e Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur
14、 les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 te
15、rmes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette
16、publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 61290-11-1 Edition 2.0 2008-04 INTERNATIONAL STANDARD NORME INTERNATIONALE Optical amplifiers Test methods Part 11-1: Polarization mode dis
17、persion parameter Jones matrix eigenanalysis (JME) Amplificateurs optiques Mthodes dessais Partie 11-1: Paramtre de dispersion du mode de polarisation Analyse des vecteurs propres de la matrice de Jones (JME) INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE M ICS
18、33.180.30 PRICE CODE CODE PRIX ISBN 2-8318-8771-2 2 61290-11-1 IEC:2008 CONTENTS FOREWORD.3 1 Scope and object5 2 Normative references .5 3 Acronyms, symbols and abbreviations 6 4 Apparatus.6 4.1 General .6 4.2 Tuneable laser 7 4.3 Polarization adjuster7 4.4 Polarizers7 4.5 Input optics .7 4.6 Fibre
19、 pigtail .7 4.7 Optical lens system .7 4.8 Output optics.7 4.9 Polarimeter7 5 Procedure 8 6 Calculations .8 6.1 Jones matrix eigenanalysis calculations 8 6.2 Display of DGD versus wavelength9 6.3 Average DGD9 6.4 Maximum DGD 9 7 Test results 9 Annex A (informative) Degree of polarization reduction d
20、ue to optical amplifier ASE11 Bibliography13 Figure 1 Schematic diagram of equipment (typical)6 Figure 2 Measurement example of the DGD for a typical optical amplifier 9 Figure A.1 Spectrum of optical amplifier output11 61290-11-1 IEC:2008 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ OPTICAL AMPLIF
21、IERS TEST METHODS Part 11-1: Polarization mode dispersion parameter Jones matrix eigenanalysis (JME) FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The obje
22、ct of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specificatio
23、ns (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liais
24、ing with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express
25、, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committee
26、s in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National C
27、ommittees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marki
28、ng procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants
29、 or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication,
30、use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility tha
31、t some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61290-11-1 has been prepared by subcommittee 86C: Fibre optic systems and active devices, of IEC technical c
32、ommittee 86: Fibre optics. This second edition cancels and replaces the first edition, published in 2003, and is a technical revision that specifically addresses additional types of optical amplifiers. It also includes updated references. The text of this standard is based on the following documents
33、: CDV Report on voting 86C/694/CDV 86C/710/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. 4 61290-11-1 IEC:2008 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all
34、the parts in the IEC 61290 series, under the general title Optical amplifiers Test methods, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec
35、.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 61290-11-1 IEC:2008 5 OPTICAL AMPLIFIERS TEST METHODS Part 11-1: Polarization mode dispersion parameter Jones matrix eigenanalysis (JME) 1 Sc
36、ope and object This part of IEC 61290 applies to all commercially available optical amplifiers (OAs), including optical fibre amplifiers (OFAs) using active fibres, semiconductor optical amplifiers (SOAs), and planar waveguide optical amplifiers (PWOAs). Polarization-mode dispersion (PMD) causes an
37、optical pulse to spread in the time domain. This dispersion could impair the performance of a telecommunications system. The effect can be related to differential group velocity and corresponding arrival times of different polarization components of the signal. For a narrowband source, the effect ca
38、n be related to a differential group delay (DGD) between pairs of orthogonally polarized principal states of polarization (PSP). Other information about PMD may be found in IEC 61282-9 in general and in IEC 61292-5 on OAs in particular. This test method describes a procedure for measuring the PMD of
39、 OAs. The measurement result is obtained from the measurement of the normalized Stokes parameters at two closely spaced wavelengths. The test method described herein requires a polarized signal at the input of the polarimeter with a degree of polarization (DOP) of at least 25 %. Although the test so
40、urce is highly polarized, the DOP at the output of the OA is reduced by amplified spontaneous emission (ASE). Annex A analyses the impact of ASE on the DOP. In order to assure an accurate measurement, the DOP is measured as part of the measurement procedure. The method described herein has been show
41、n to be immune to polarization-dependent gain (PDG) and polarization dependent loss (PDL) up to approximately 1 dB. Although the Jones matrix eigenanalysis (JME) test method is in principle also applicable to unpumped (that is, unpowered) OAs, the JME technique in this standard applies to pumped (th
42、at is, powered) OAs only. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
43、IEC/TR 61282-9, Fibre optic communication system design guides Part 9: Guidance on polarization mode dispersion measurements and theory IEC/TR 61292-5, Optical amplifiers Part 5: Polarization mode dispersion parameter General information 6 61290-11-1 IEC:2008 3 Acronyms, symbols and abbreviations Wa
44、velength interval Differential group delay (DGD) Optical frequency Angular optical frequency F OA noise factor G Gain h Planks constant N() Power spectral density of the ASE P s Amplified signal power ASE Amplified spontaneous emission DGD Differential group delay DOP Degree of polarization DUT Devi
45、ce (optical amplifier) under test JME Jones matrix eigenanalysis OA Optical amplifier OFA Optical fibre amplifier PDG Polarization-dependent gain PDL Polarization-dependent loss PMD Polarization-mode dispersion PWOA Planar waveguide optical amplifier PSP Principal states of polarization SOA Semicond
46、uctor optical amplifier 4 Apparatus 4.1 General Figure 1 provides a schematic diagram of the key components in a typical measurement system. 0 45 90 Linear polarizers Tunable laser Polarimeter Polarization adjuster DUT IEC 393/03Figure 1 Schematic diagram of equipment (typical) 61290-11-1 IEC:2008 7
47、 4.2 Tuneable laser Use single-line lasers or narrowband sources that can be varied or tuned across the intended measurement wavelength range. The spectral distribution shall be narrow enough so that light on the DUT remains polarized under all conditions of the measurement. 4.3 Polarization adjuste
48、r If the source is polarized, a polarization adjuster follows the laser and is set to provide roughly circularly polarized light to the polarizers, so that the polarizers never cross polar- ization with the input light. If the source is unpolarized, this is not necessary. For the polarized source, a
49、djust the polarization as follows. a) Set the tuneable laser wavelength to the centre of the range to be measured. b) Insert each of the three polarizers into the beam and perform three corresponding power measurements at the output of the polarizer. c) Adjust the source polarization via the polarization adjuster in such a way that the three powers fall within approximately a
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1