IEC 62386-204-2009 Digital addressable lighting interface - Part 204 Particular requirements for control gear - Low voltage halogen lamps (device type 3)《数字可寻址照.pdf

1、 IEC 62386-204 Edition 1.0 2009-06 INTERNATIONAL STANDARD NORME INTERNATIONALE Digital addressable lighting interface Part 204: Particular requirements for control gear Low voltage halogen lamps (device type 3) Interface dclairage adressable numrique Partie 204: Exigences particulires pour les appar

2、eillages de commande Lampes halogne basse tension (dispositif de type 3) IEC 62386-204:2009 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2009 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any

3、 means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publicat

4、ion, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou

5、mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou co

6、ntactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes Intern

7、ational Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue o

8、f IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to

9、date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in E

10、nglish and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer S

11、ervice Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique

12、 et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/search

13、pub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpu

14、b Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contien

15、t plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des comm

16、entaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 62386-204 Edition 1.0 2009-06 INTERNATIONAL STANDARD NORME INTERNATIONALE Digital addressable lighting interface Part 20

17、4: Particular requirements for control gear Low voltage halogen lamps (device type 3) Interface dclairage adressable numrique Partie 204: Exigences particulires pour les appareillages de commande Lampes halogne basse tension (dispositif de type 3) INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION

18、 ELECTROTECHNIQUE INTERNATIONALE W ICS 29.140.50; 29.140.99 PRICE CODE CODE PRIX ISBN 2-8318-1040-2 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale 2 62386-204 IEC:2009 CONTENTS FOREWORD.3 INTRODUCTION.5 1 Scope.6 2

19、Normative references .6 3 Terms and definitions .6 4 General 7 5 Electrical specifications 7 6 Interface power supply .7 7 Transmission protocol structure7 8 Timing 7 9 Method of operation .7 10 Declaration of variables8 11 Definition of commands 9 12 Test procedures .14 Annex A (informative) Exampl

20、es of algorithms .35 Bibliography36 Figure 1 Application extended configuration command sequence example.10 Figure 2 Test sequence QUERY FEATURES15 Figure 3 Test sequence QUERY SHORT CIRCUIT .16 Figure 4 Test sequence QUERY OPEN CIRCUIT .17 Figure 5 Test sequence QUERY LOAD DECREASE.18 Figure 6 Test

21、 sequence QUERY LOAD INCREASE 19 Figure 7 QUERY CURRENT PROTECTOR ACTIVE: Underload .20 Figure 8 QUERY CURRENT PROTECTOR ACTIVE: Overload .21 Figure 9 QUERY THERMAL SHUT DOWN .22 Figure 10 QUERY THERMAL OVERLOAD23 Figure 11 REFERENCE SYSTEM POWER.24 Figure 12 REFERENCE SYSTEM POWER: 100 ms-timeout .

22、25 Figure 13 REFERENCE SYSTEM POWER: Command in-between .27 Figure 14 REFERENCE SYSTEM POWER: 15 minutes timer .27 Figure 15 REFERENCE SYSTEM POWER: failed.28 Figure 16 ENABLE / DISABLE CURRENT PROTECTOR29 Figure 17 ENABLE DEVICE TYPE: Application extended commands30 Figure 18 ENABLE DEVICE TYPE: Ap

23、plication extended configuration commands 132 Figure 19 ENABLE DEVICE TYPE: Application extended configuration commands 232 Figure 20 QUERY EXTENDED VERSION NUMBER .33 Figure 21 RESERVED APPLICATION EXTENDED COMMANDS34 Table 1 Declaration of variables.9 Table 2 Summary of the application extended co

24、mmand set 14 62386-204 IEC:2009 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ DIGITAL ADDRESSABLE LIGHTING INTERFACE Part 204: Particular requirements for control gear Low voltage halogen lamps (device type 3) FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organizatio

25、n for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC pu

26、blishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with ma

27、y participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agree

28、ment between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC P

29、ublications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used

30、or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corr

31、esponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the

32、latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever,

33、whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications i

34、s indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC

35、 62386-204 has been prepared by subcommittee 34C: Auxiliaries for lamps, of IEC technical committee 34: Lamps and related equipment. The text of this standard is based on the following documents: FDIS Report on voting 34C/876/FDIS 34C/885/RVD Full information on the voting for the approval of this s

36、tandard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. This part 204 is intended to be used in conjunction with IEC 62386-101 and IEC 62386-102, which contain general requirements for the relevan

37、t product type (control gear or control devices). 4 62386-204 IEC:2009 A list of all parts of IEC 62386 series, under the general title Digital addressable lighting interface, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until

38、 the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed; withdrawn; replaced by a revised edition; or amended. 62386-204 IEC:2009 5 INTRODUCTION This first edition of I

39、EC 62386-204 is published in conjunction with IEC 62386-101 and IEC 62386-102. The division of IEC 62386 into separately published parts provides for ease of future amendments and revisions. Additional requirements will be added as and when a need for them is recognised. This International Standard,

40、 and the other parts that make up IEC 62386-200 series, in referring to any of the clauses of IEC 62386-101 or IEC 62386-102, specifies the extent to which such a clause is applicable and the order in which the tests are to be performed. The parts also include additional requirements, as necessary.

41、All parts that make up the IEC 62386-200 series are self-contained and therefore do not include references to each other. Where the requirements of any of the clauses of IEC 62386-101 or IEC 62386-102 are referred to in this International Standard by the sentence “ The requirements of IEC 62386- 1XX

42、, clause n apply”, this sentence is to be interpreted as meaning that all requirements of the clause in question of Part 101 or Part 102 apply, except any which are inapplicable to the specific type of lamp control gear covered by Part 204. All numbers used in this International Standard are decimal

43、 numbers unless otherwise noted. Hexadecimal numbers are given in the format 0xVV, where VV is the value. Binary numbers are given in the format XXXXXXXXb or in the format XXXX XXXX, where X is 0 or 1; “x“ in binary numbers means “dont care“. 6 62386-204 IEC:2009 DIGITAL ADDRESSABLE LIGHTING INTERFA

44、CE Part 204: Particular requirements for control gear Low voltage halogen lamps (device type 3) 1 Scope This International Standard specifies a protocol and methods of test for the control by digital signals of electronic control gear for use on a.c. or d.c. supplies, associated with low voltage hal

45、ogen lamps. NOTE Tests in this standard are type tests. Requirements for testing individual control gear during production are not included. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited

46、applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 62386-101:2009, Digital addressable lighting interface Part 101: General requirements System IEC 62386-102:2009, Digital addressable lighting interface Part 102: General requirement

47、s Control gear 3 Terms and definitions For the purposes of this document, the terms and definitions given in Clause 3 of IEC 62386- 101:2009 and Clause 3 of IEC 62386-102:2009 apply, with the following additions. 3.1 reference measurement process during which gear determines the actual lamp load wit

48、h internal procedures and measurements, not specified by this standard NOTE The details of this process are a matter of detailed design of gear and are outside the scope of this standard. 3.2 detection of load decrease recognition that the actual lamp load is significantly below the load measured du

49、ring a successful reference measurement NOTE The criteria for regarding a load increase or decrease as significant can only be decided by the manufacturer and these criteria should be described in the manual. 3.3 detection of load increase recognition that the actual lamp load is significantly above the load m