IEEE 802.15.3D-2017 High Data Rate Wireless Multi-Media Networks Amendment 2 100 Gb s Wireless Switched Point-to-Point Physical Layer (IEEE Computer Society).pdf

1、 IEEE Standard for High Data Rate Wireless Multi-Media Networks Amendment 2: 100 Gb/s Wireless Switched Point-to-Point Physical Layer Sponsored by the LAN/MAN Standards Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Computer Society IEEE Std 802.15.3d-2017 (Amendment to IEEE Std 802.1

2、5.3-2016 as amended by IEEE Std 802.15.3e-2017) IEEE Std 802.15.3d-2017(Amendment toIEEE Std 802.15.3-2016as amended byIEEE Std 802.15.3e-2017)IEEE Standard for High Data Rate Wireless Multi-Media NetworksAmendment 2: 100 Gb/s Wireless Switched Point-to-Point Physical LayerSponsorLAN/MAN Standards C

3、ommitteeof theIEEE Computer SocietyApproved 28 September 2017IEEE-SA Standards BoardThe Institute of Electrical and Electronics Engineers, Inc.3 Park Avenue, New York, NY 10016-5997, USACopyright 2017 by The Institute of Electrical and Electronics Engineers, Inc.All rights reserved. Published 18 Oct

4、ober 2017. Printed in the United States of America.IEEE and 802 are registered trademarks in the U.S. Patent fitnessfor a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness ofmaterial. In addition, IEEE disclaims any and all conditions relating to:

5、results; and workmanlike effort.IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.”Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that thereare no other ways to produce, test, measure, purchase, market, or provide other goods and servic

6、es related tothe scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved andissued is subject to change brought about through developments in the state of the art and commentsreceived from users of the standard.In publishing and making its standards availa

7、ble, IEEE is not suggesting or rendering professional or otherservices for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by anyother person or entity to another. Any person utilizing any IEEE Standards document, should rely upon hisor her own independent jud

8、gment in the exercise of reasonable care in any given circumstances or, asappropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEEstandard.IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,EXEMPLARY, OR CONSEQUENTIAL DAM

9、AGES (INCLUDING, BUT NOT LIMITED TO:PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; ORBUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OROTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLI

10、CATION, USE OF, OR RELIANCE UPONANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE ANDREGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.4Copyright 2017 IEEE. All rights reserved.Translations The IEEE consensus development process involves the review of documents in English only. In the

11、eventthat an IEEE standard is translated, only the English version published by IEEE should be considered theapproved IEEE standard.Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards BoardOperations Manual shall not be considered or infer

12、red to be the official position of IEEE or any of itscommittees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures,symposia, seminars, or educational courses, an individual presenting information on IEEE standards shallmake it clear that his or her views

13、should be considered the personal views of that individual rather than theformal position of IEEE.Comments on standardsComments for revision of IEEE Standards documents are welcome from any interested party, regardless ofmembership affiliation with IEEE. However, IEEE does not provide consulting inf

14、ormation or advicepertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of aproposed change of text, together with appropriate supporting comments. Since IEEE standards represent aconsensus of concerned interests, it is important that any responses to com

15、ments and questions also receivethe concurrence of a balance of interests. For this reason, IEEE and the members of its societies andStandards Coordinating Committees are not able to provide an instant response to comments or questionsexcept in those cases where the matter has previously been addres

16、sed. For the same reason, IEEE does notrespond to interpretation requests. Any person who would like to participate in revisions to an IEEEstandard is welcome to join the relevant IEEE working group.Comments on standards should be submitted to the following address:Secretary, IEEE-SA Standards Board

17、 445 Hoes Lane Piscataway, NJ 08854 USALaws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with theprovisions of any IEEE Standards document does not imply compliance to any applicable regulatoryrequirements. Implementers of the stand

18、ard are responsible for observing or referring to the applicableregulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is notin compliance with applicable laws, and these documents may not be construed as doing so.CopyrightsIEEE draft and approved sta

19、ndards are copyrighted by IEEE under U.S. and international copyright laws.They are made available by IEEE and are adopted for a wide variety of both public and private uses. Theseinclude both use, by reference, in laws and regulations, and use in private self-regulation, standardization,and the pro

20、motion of engineering practices and methods. By making these documents available for use andadoption by public authorities and private users, IEEE does not waive any rights in copyright to thedocuments.5Copyright 2017 IEEE. All rights reserved.Photocopies Subject to payment of the appropriate fee, I

21、EEE will grant users a limited, non-exclusive license tophotocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center,Customer Service, 222 Rosewood

22、Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission tophotocopy portions of any individual standard for educational classroom use can also be obtained throughthe Copyright Clearance Center.Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documen

23、ts may be superseded at any timeby the issuance of new editions or may be amended from time to time through the issuance of amendments,corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of thedocument together with any amendments, corrigenda, or err

24、ata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten yearsold and has not undergone a revision process, it is reasonable to conclude that its contents, although still ofsome value, do not wholly reflect the present state of the art

25、. Users are cautioned to check to determine thatthey have the latest edition of any IEEE standard.In order to determine whether a given document is the current edition and whether it has been amendedthrough the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexpl

26、ore.ieee.org/ or contact IEEE at the address listed previously. For more information about the IEEE-SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org.Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following U

27、RL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errataperiodically.PatentsAttention is called to the possibility that implementation of this standard may require use of subject mattercovered by patent rights. By publication of this standard, no pos

28、ition is taken by the IEEE with respect to theexistence or validity of any patent rights in connection therewith. If a patent holder or patent applicant hasfiled a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.

29、org/about/sasb/patcom/patents.html. Letters of Assurance may indicatewhether the Submitter is willing or unwilling to grant licenses under patent rights without compensation orunder reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfairdiscrimination to appli

30、cants desiring to obtain such licenses.Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is notresponsible for identifying Essential Patent Claims for which a license may be required, for conductinginquiries into the legal validity or scope of Patents

31、Claims, or determining whether any licensing terms orconditions provided in connection with submission of a Letter of Assurance, if any, or in any licensingagreements are reasonable or non-discriminatory. Users of this standard are expressly advised thatdetermination of the validity of any patent ri

32、ghts, and the risk of infringement of such rights, is entirely theirown responsibility. Further information may be obtained from the IEEE Standards Association.6Copyright 2017 IEEE. All rights reserved.ParticipantsAt the time of approval of this standard, the IEEE 802.15 Working Group had the follow

33、ing membership:Robert F. Heile, Working Group ChairRick Alfvin, Working Group Vice ChairPatrick Kinney, Working Group Vice Chair, Working Group SecretaryJames P. K. Gilb, Working Group Technical EditorBenjamin A. Rolfe, Working Group TreasurerThomas Krner, Task Group 15.3d ChairIwao Hosako, Task Gro

34、up 15.3d Vice ChairKen Hiraga, Task Group 15.3d SecretaryMonique B. Brown, Task Group 15.3d Technical EditorMajor contributions were received from the following individuals:Koorosh AkhavanKeiji AkiyamaHideki AoyamaPhilip BeecherChris CalvertRadhakrishna CanchiJaesang ChaSoo-Young ChangClint ChaplinH

35、endricus De RuijterAndrew EstradaMatthew GillmoreTim GodfreyJussi HaapolaShinsuke HaraMarco HernandezChristopher HettJay HolcombYeong Min JangSeong-Soon JooVolker JungnickelJunhyeong KimShoichi KitazawaRyuji KohnoKeitarou KondouAnn KriegerNamtuan LeJae Seung LeeMyung LeeHuan-Bang LiQiang LiMichael M

36、cInnisMohammad NekouiTrang NguyenPaul NikolichMitsuaki OshimaGlenn ParsonsCharles PerkinsAlbert PetrickJoe PollandClinton PowellVerotiana RabarijaonaDemir RakanovicIvan ReedeJrg RobertRichard RobertsRuben E. Salazar CardozoNoriyuki SatoNikola SerafimovskiKunal ShahStephen ShellhammerShusaku ShimadaG

37、ary StuebingDon SturekKou TogashiDobroslav TsonevBilly VersoBrian WeisHidetoshi YokotaJuan Carlos ZunigaKeiji AkiyamaAndrew Estrada Alexander FrickeMinoru FujishimaDanping HeAkifumi KasamatsuAnthony KellyKeitarou KondouHiroyo OgawaBile PengSebastian ReyNorihiko SekineKo Togashi 7Copyright 2017 IEEE.

38、 All rights reserved.The following members of the individual balloting committee voted on this standard. Balloters may havevoted for approval, disapproval, or abstention. When the IEEE-SA Standards Board approved this standard on 28 September 2017, it had the followingmembership:Jean-Philippe Faure,

39、 ChairGary Hoffman, Vice ChairJohn D. Kulick, Past ChairKonstantinos Karachalios, Secretary*Member EmeritusTomoko AdachiThomas AlexanderRick AlfvinArne AlpingNobumitsu AmachiCarol AnsleyButch AntonTuncer BaykasHarry BimsNancy BravinVern BrethourMonique B. BrownDemetrio Bucaneg, Jr.William ByrdJuan C

40、arreonSayantan ChoudhuryKeith ChowCharles CookTodor CooklevRichard DoyleAvraham FreedmanAlexander FrickeMatthias FritscheRandall GrovesMichael GundlachShiwen HeMarco HernandezWerner HoelzlRita HornerIwao HosakoNoriyuki IkeuchiYasuhiko InoueSergiu IordanescuAkio IsoAtsushi ItoRaj JainSangKwon JeongRi

41、tesh KallePiotr KarockiStuart KerryEvgeny KhorovYongbum KimKeitarou KondouYasushi KudohThomas KrnerJon LewisMichael LynchElvis MaculubaIgnacio Marin GarciaMichael McInnisRichard MellitzCharles MoorwoodRonald MuriasMichael NewmanCharles NgetheNick S. A. NikjooJohn NotorSatoshi OyamaBansi PatelArumuga

42、m PaventhanJoe PollandClinton PowellVenkatesha PrasadSebastian ReyMaximilian RiegelRobert RobinsonBenjamin A. RolfeKazuyuki SakodaShigenobu SasakiNaotaka SatoPeter SaundersonReinhard SchrageDaniel SmithThomas StaraiRene StruikWalter StrupplerBo SunSteven TildenMark-Rene UchidaLorenzo VangelistaDmitr

43、i VarsanofievGeorge VlantisKhurram WaheedLisa WardKarl WeberHung-Yu WeiScott WillyOren YuenChuck AdamsMasayuki AriyoshiTed BurseStephen DukesDoug EdwardsJ. Travis GriffithMichael JanezicThomas KoshyJoseph L. Koepfinger*Kevin LuDaleep MohlaDamir NovoselRonald C. PetersenAnnette D. ReillyRobby RobsonD

44、orothy StanleyAdrian StephensMehmet UlemaPhil WennblomHoward WolfmanYu Yuan8Copyright 2017 IEEE. All rights reserved.IntroductionIEEE Std 802.15.3d-2017 is an amendment to IEEE Std 802.15.3-2016 that defines an alternative physicallayer (PHY) at the lower THz frequency range, between 252 GHz and 325

45、 GHz, for switched point-to-pointlinks, along with the necessary MAC changes to support this PHY. This amendment builds on the concept ofpairnet, introduced in IEEE Std 802.15.3e-2017, and inherits the corresponding MAC changes defined there.Some of the key features and additions are as follows: Ope

46、ration in the THz frequency band. Usage of eight different bandwidths between 2.16 GHz and 69.12 GHz. Designed for data rates of up to 100 Gb/s. Use of a pairnet structure supporting wireless links for intra-device communication (e.g., board-to-board communication), close proximity communication, wi

47、reless data centers, and backhaul/fronthaul links. Selectable PHY modes (single carrier and on-off keying) to achieve either ultra high-speed operationor system simplicity.Interest in developing a wireless communication system at THz frequencies started in 2008 with theestablishment of the THz Inter

48、est Group. In May 2014, Task Group 3d was formed, covering switched point-to-point connections operating in the frequencies from 60 GHz up to the lower THz bands. The Task Groupstarted to work on four supporting documents: the Application Requirements Document, the TechnicalRequirements Document, th

49、e Channel Modeling Document, and the Evaluation Criteria Document. InSeptember 2014, discussions split the Task Group into two, leading to the development of an amendment forclose proximity links at 60 GHz as the separate Task Group 3e. The first meeting of Task Group 3e was inMay 2015. In November 2015, the required PAR change for Task Group 3d to limit the activities to thelower THz frequency ranges was approved. During the March 2016 meeting, the supporting documentswere approved and the call for proposals was issued. Proposals were reviewed during the July an