IEEE C57.152-2013 Guide for Diagnostic Field Testing of Fluid-Filled Power Transformers Regulators and Reactors《充油电力变压器 调节阀和电抗器诊断现场测试用IEEE指南》.pdf

1、 IEEE Guide for Diagnostic Field Testing of Fluid-Filled Power Transformers, Regulators, and Reactors Sponsored by the Transformers Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Power and Energy Society IEEE Std C57.152-2013 (Revision of IEEE Std 62TM-1995) IEEE Std C57.152-2013 (Rev

2、ision of IEEE Std 62TM-1995) IEEE Guide for Diagnostic Field Testing of Fluid-Filled Power Transformers, Regulators, and Reactors Sponsor Transformers Committee of the IEEE Power and Energy Society Approved 6 March 2013 IEEE-SA Standards Board Grateful acknowledgment is made to Doble Engineering Com

3、pany for permission to use source material. Abstract: Diagnostic tests and measurements that are performed in the field on fluid-filled power transformers and regulators are described. Whenever possible, shunt reactors are treated in a similar manner to transformers. Tests are presented systematical

4、ly in categories depending on the subsystem of the unit being examined. A diagnostic chart is included as an aid to identify the various subsystems. Additional information is provided regarding specialized test and measuring techniques. Interpretive discussions are also included in several areas to

5、provide additional insight on the particular test or to provide guidance on acceptance criteria. These discussions are based on the authors judgment of accepted practice. It should be noted that the results of several types of tests should be interpreted together to diagnose a problem. Manufacturers

6、 acceptance criteria should also be consulted as it may take precedence over the criteria in this guide. Keywords: bushing, core, diagnostic evaluation, field testing, fluid-filled transformer, IEEE C57.152, insulating liquid, off-line testing, reactor, regulator, safety, tank, tap changer, winding

7、The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2013 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 21 June 2013. Printed in the United States of America. IEEE is a registered trademark i

8、n the U.S. Patent +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Copyright 2013 IEEE. All rights reserved. ivNotice to users Laws and regulations Users of IEEE Standards documents

9、 should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. I

10、EEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights This document is copyrighted by the IEEE. It is made available for a wide variety of both public and private uses.

11、 These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making this document available for use and adoption by public authorities and private users, the IEEE does not waive any rig

12、hts in copyright to this document. Updating of IEEE documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An officia

13、l IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigend

14、a, or errata, visit the IEEE-SA Website at http:/standards.ieee.org/index.html or contact the IEEE at the address listed previously. For more information about the IEEE Standards Association or the IEEE standards development process, visit IEEE-SA Website at http:/standards.ieee.org/index.html. Erra

15、ta Errata, if any, for this and all other standards can be accessed at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may requi

16、re use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Lette

17、r of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with r

18、easonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Copyright 2013 IEEE. All rights reserved. vEssential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for i

19、dentifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing a

20、greements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Associa

21、tion. Copyright 2013 IEEE. All rights reserved. viParticipants At the time this IEEE guide was completed, the Diagnostic Field Testing Power Transformers and Reactors Working Group had the following membership: Jane Ann Verner, Chair Loren Wagenaar, Vice Chair Kipp Yule, Secretary Richard Amos Raj A

22、huja Jerry Allen William Bartley Wallace Binder Kent Brown Bill Chiu Larry Coffeen Jerry Cockran John Crouse Eric Davis Don Dorris Jefferson Foley Bruce Forsyth Mary Foster Ramon Garcia James Gardner Robert Ganser Sr. Prodipto Ghosh Jorge Gonzalez Jerry Harlan David Harris John Herron Gary Hoffman M

23、ike Horning Wayne Johnson Matthew Kennedy Joe Kelly C. J. Kalra Alexander Kraetge Michael Lau Mario Locarno Eberhard Lemke John Luksich Andre Lux John Matthews Susan McNelly Steve McGovern Vinay Mehrotra Michael Miller Paul Mushill Poorvi Patel Mark Perkins Donald Platts Lewis Powell Paulette Powell

24、 Tom Prevost John Progarr Mark Rivers Oleg Roizman Kirk Robbins Mark Roberts Hakan Sahin O. Paul Salvatto Daniel Sauer Craig Stiegemeier Jin Sim Charles Sweetser James Thompson Robert Thompson Dharma Vir Dieter Wagner Barry Ward Peter Werelius Jennifer Yu Peter Zhao Copyright 2013 IEEE. All rights r

25、eserved. viiThe following members of the individual balloting committee voted on this guide. Balloters may have voted for approval, disapproval, or abstention. Michael Adams Carlo Arpino Roberto Asano Peter Balma Martin Baur Barry Beaster W. J. Bill Bergman Steven Bezner Wallace Binder Thomas Bishop

26、 Thomas Blackburn W. Boettger Paul Boman Jeffrey Britton Bill Brown Kent Brown William Byrd Thomas Callsen Paul Cardinal Antonio Cardoso Juan Castellanos Stephen Conrad John Crouse William Darovny Alan Darwin Scott Digby Dieter Dohnal Gary Donner Randall Dotson Fred Elliott James Fairris Jorge Ferna

27、ndez Daher Rabiz Foda Joseph Foldi Bruce Forsyth Marcel Fortin Frank Gerleve David Gilmer Jalal Gohari James Graham William Griesacker Randall C. Groves Edward Gulski Bal Gupta John Harley J. Harlow David Harris Roger Hayes Martin Hinow Gary Hoffman Philip Hopkinson Charles Johnson Laszlo Kadar C. K

28、alra Gael Kennedy George Kennedy Mohamed Abdel Khalek Yuri Khersonsky Morteza Khodaie James Kinney Joseph L. Koepfinger Jim Kulchisky Saumen Kundu John Lackey Chung-Yiu Lam Jeffrey LaMarca Stephen Lambert Thomas La Rose Aleksandr Levin Mario Locarno Thomas Lundquist Greg Luri J. Dennis Marlow Lee Ma

29、tthews James McIver David McKinnon Susan McNelly Joseph Melanson Tom Melle Michael Miller T. David Mills Daniel Mulkey Jerry Murphy Ryan Musgrove Dennis Neitzel Michael S. Newman Joe Nims Lorraine Padden Bansi Patel Dhiru Patel J. Patton Brian Penny Christopher Petrola Donald Platts Alvaro Portillo

30、Lewis Powell Tom Prevost Moises Ramos Jean-Christophe Riboud Johannes Rickmann Michael Roberts Oleg Roizman John Rossetti James Rossman Marnie Roussell Thomas Rozek Dinesh Sankarakurup Daniel Sauer Bartien Sayogo Ewald Schweiger Devki Sharma Suresh Shrimavle Gil Shultz Hyeong Sim James Smith Jerry S

31、mith Steve Snyder Brian Sparling Gary Stoedter Michael Swearingen Charles Sweetser Ed teNyenhuis Malcolm Thaden Juan Thierry James Thompson Robert Thompson Eric Udren John Vergis Jane Ann Verner Loren Wagenaar David Wallach Barry Ward Peter Werelius Kenneth White John Wilson Jonathan Woodworth John

32、Yale Jian Yu Kipp Yule Luis Zambrano James Ziebarth Copyright 2013 IEEE. All rights reserved. viiiWhen the IEEE-SA Standards Board approved this guide on 6 March 2013, it had the following membership: John Kulick, Chair David J. Law, Vice Chair Richard H. Hulett, Past Chair Konstantinos Karachalios,

33、 Secretary Masayuki Ariyoshi Peter Balma Farooq Bari Ted Burse Wael William Diab Stephen Dukes Jean-Philippe Faure Alexander Gelman Mark Halpin Gary Hoffman Paul Houz Jim Hughes Michael Janezic Joseph L. Koepfinger* Oleg Logvinov Ron Petersen Gary Robinson Jon Walter Rosdahl Adrian Stephens Peter Su

34、therland Yatin Trivedi Phil Winston Yu Yuan *Member Emeritus Also included are the following nonvoting IEEE-SA Standards Board liaisons: Richard DeBlasio, DOE Representative Michael Janezic, NIST Representative Don Messina IEEE Standards Program Manager, Document Development Erin Spiewak IEEE Standa

35、rds Program Manager, Technical Program Development Copyright 2013 IEEE. All rights reserved. ixIntroduction This introduction is not part of IEEE Std C57.152-2013, IEEE Guide for Diagnostic Field Testing of Fluid-Filled Power Transformers, Regulators, and Reactors. Power transformers usually represe

36、nt one of the most important and single most costly items in substations. Furthermore, particularly for large transformers, their failures usually result in lengthy outages or downgrading of electric service reliability. For these reasons, a high degree of care is required to properly field test thi

37、s equipment to confirm equipment status and identify problems. Because of these considerations, IEEE and other standards development organizations have published, since at least the early 1920s, various recommendations for testing and maintaining transformers. This guide replaces IEEE Std 62-1995 B3

38、3, since it primarily deals with power transformers, regulators, and reactors, which are devices covered by the Transformers Committee.aNew sections have been added on safety; tank vacuum testing; visual inspection; a chart providing commissioning, routine, and after-fault testing guidance; and info

39、rmational annexes. Also, new technologies have been identified that are available for use in field testing. aThe numbers in brackets correspond to those of the bibliography in Annex J. Copyright 2013 IEEE. All rights reserved. xContents 1. Scope 1 2. Normative references 2 3. Definitions 2 4. Purpos

40、e of tests. 3 5. Maintenance tests and information. 5 5.1 Recommended, as-needed, and optional maintenance tests. 5 5.2 EPRI Power Transformer Maintenance and Application Guide 6 6. Safety 7 6.1 General 7 6.2 Types of hazards 7 6.3 Creating an electrically safe work condition . 8 6.4 General practic

41、es for internal inspection . 10 6.5 Suggested general control measures 10 6.6 Apparatus. 12 7. Tests and test techniques 12 7.1 Periodic general inspections 12 7.2 Main tank (active part). 14 7.3 Bushings 59 7.4 Tap changers 61 7.5 Ancillary equipment 67 8. Diagnostic chart 73 Annex A (informative)

42、Power factor measurements 76 Annex B (informative) Bushings 82 Annex C (informative) Infrared temperature measurements 85 Annex D (informative) Dew point test . 88 Annex E (informative) Furan testing 91 Annex F (informative) Frequency response testing 93 Annex G (informative) Dielectric frequency re

43、sponse. 97 Annex H (informative) Other methods to verify polarity from previous field test guide revisions 101 Annex I (informative) Particle count 103 Annex J (informative) Bibliography. 106 Copyright 2013 IEEE. All rights reserved. 1IEEE Guide for Diagnostic Field Testing of Fluid-Filled Power Tra

44、nsformers, Regulators, and Reactors IMPORTANT NOTICE: IEEE Standards documents are not intended to ensure safety, health, or environmental protection, or ensure against interference with or from other devices or networks. Implementers of IEEE Standards documents are responsible for determining and c

45、omplying with all appropriate safety, security, environmental, health, and interference protection practices and all applicable laws and regulations. This IEEE document is made available for use subject to important notices and legal disclaimers. These notices and disclaimers appear in all publicati

46、ons containing this document and may be found under the heading “Important Notice” or “Important Notices and Disclaimers Concerning IEEE Documents.” They can also be obtained on request from IEEE or viewed at http:/standards.ieee.org/IPR/disclaimers.html. 1. Scope This guide describes diagnostic fie

47、ld tests and measurements that are performed on fluid-filled power transformers and regulators. Whenever possible, shunt reactors are treated in a similar manner to transformers. The tests are presented systematically in categories depending on the subsystem of the unit being examined. A diagnostic

48、chart is included as an aid to identifying the various subsystems. Additional information is provided regarding specialized test and measuring techniques. Interpretive discussions are also included in several areas to provide additional insight on the particular test or to provide guidance on accept

49、ance criteria. These discussions are based on the authors judgment of accepted practice. It should be noted that the results of several types of tests should be interpreted together to diagnose a problem. Manufacturers acceptance criteria and other standards in the IEEE C57 series take precedence over the content of this guide. IEEE Std C57.152-2013 IEEE Guide for Diagnostic Field Testing of Fluid-Filled Power Transformers, Regulators, and Reactors Copyright 2013 IEEE. All rights reserved. 22. Normative references The following referenced documents are ind