45.6 - IEEE Recommended Practice for Electrical Installations on Shipboard--Electrical Testing.pdf

1、IEEE Recommended Practice for Electrical Installations on ShipboardElectrical Testing IEEE Std 45.6-2016 IEEE Industry Applications Society Sponsored by the Petroleum fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In a

2、ddition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, tes

3、t, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from u

4、sers of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IE

5、EE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropri- ate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FO

6、R ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY , OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCURE- MENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY , WHETHER IN CON- TRACT, STRICT LIAB

7、ILITY , OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.4 Copyright 2017 IEEE. All rights reserved. Translations The I

8、EEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or oral, that is not processed in

9、 accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses,

10、 an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any intereste

11、d party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertain- ing to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. S

12、ince IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concur- rence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordi- nating Committees are not able to prov

13、ide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE

14、 working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of a

15、ny IEEE Standards document does not imply compliance to any applicable regulatory require- ments. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not i

16、n compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under US and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses.

17、 These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the pro- motion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rig

18、hts in copyright to the documents.5 Copyright 2017 IEEE. All rights reserved. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-c

19、ommercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Ser- vice, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained thro

20、ugh the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corri- genda, or errat

21、a. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every 10 years. When a document is more than 10 years old and has not undergone a

22、revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the

23、current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org/ or contact IEEE at the address listed previously. For more information about the IEEE-SA or IEEEs standards development process, visit th

24、e IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/ standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called

25、to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent a

26、pplicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE- SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under pa

27、tent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrim- ination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE

28、 is not re- sponsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if

29、 any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the valid- ity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained fr

30、om the IEEE Standards Association.6 Copyright 2017 IEEE. All rights reserved. Participants At the time this IEEE recommended practice was completed, the P45.6 Working Group had the following membership: Timothy L. Gauthier, Chair Dwight Alexander , Vice Chair James Babcock Paul Bishop Greg Bolch Hug

31、h T. Davall Robert Durham Michael D. Fitzmaurice Randall Groves Chris Heron Mohammed Islam John Kay Earl MacDonald William McBride T. David Mills Dennis K. Neitzel Lorraine Padden Sergio Panetta Joseph Piff Iulian Profir Tim Rohrer Rod Van Wart James Wolfe The following members of the individual bal

32、loting committee voted on this recommended practice. Balloters may have voted for approval, disapproval, or abstention. Dwight Alexander John Amy James Babcock Frank Basciano Thomas Bishop Dennis Bogh Rudy Bright Bill Brown William Byrd Paul Cardinal James Conrad Matthew Davis Norbert Doerry Gary Do

33、nner Neal Dowling Robert Durham Keith Flowers Nancy Frost Timothy L. Gauthier J. Travis Griffith Randall Groves Ajit Gwal Chris Heron Lee Herron Werner Hoelzl Richard Jackson Ben C. Johnson Yuri Khersonsky Robert Konnik Saumen Kundu Benjamin Lanz Michael Lauxman Steven Liggio Albert Livshitz Earl Ma

34、cDonald Arturo Maldonado William McBride Dennis K. Neitzel Arthur Neubauer Michael Newman T. W . Olsen Lorraine Padden Richard Paes Sergio Panetta Howard Penrose Kevin Peterson K. James Phillips Joseph Piff Iulian Profir Ryandi Ryandi Robert Seitz Nikunj Shah Jerry Smith Michael Steurer James Timper

35、ley John Vergis Kenneth White When the IEEE-SA Standards Board approved this recommended practice on 7 December 2016, it had the following membership: Jean-Philippe Faure, Chair Ted Burse, Vice Chair John Kulick, Past Chair Konstantinos Karachalios, Secretary Chuck Adams Masayuki Ariyoshi Stephen Du

36、kes Jianbin Fan J. Travis Griffith Gary Hoffman Ronald W . Hotchkiss Michael Janezic Joseph L. Koepfinger* Hung Ling Kevin Lu Annette D. Reilly Gary Robinson Mehmet Ulema Yingli Wen Philip Winston Howard Wolfman Don Wright Yu Yuan Daidi Zhong *Member Emeritus7 Copyright 2017 IEEE. All rights reserve

37、d. Introduction This introduction is not part of IEEE Std 45.6-2016, IEEE Recommended Practice for Electrical Installations on Ship- boardElectrical Testing. The IEEE Std 45 series comprises nine recommended practices addressing electrical installations on ships and marine platforms. IEEE Std 45.6 p

38、rovides a recommended practice for electrical testing of shipboard elec- trical power systems, including: ac power systems, dc power systems, emergency power systems, shore pow- er, power quality and harmonics, electric propulsion and maneuvering systems, motors and drives, thrusters, and steering s

39、ystems intended for use with the IEEE Standard 45 series of documents. The topics covered in this document should be considered from the beginning of the project and throughout the design and construc- tion processes, and thereby should facilitate the integration of electrical systems at the shipyar

40、d level. Previous editions of IEEE Std 45 were developed as single documents addressing all areas. On 9 June 2005, Project Authorization Request (PAR) 45 for the Revision of IEEE Std 45-2002 was approved and the revision of IEEE Std 45 as a single document began. It soon became apparent that attempt

41、ing to cover all issues in a single document would produce a document that was very large and therefore difficult to ballot due to the wide range of issues needed to be addressed. In September 2008 it was decided that the revision of IEEE Std 45 should be developed as a base document with separate d

42、ocuments addressing specific areas. On 10 December 2008, separate PARs were approved for seven separate recommended practices. Additional PARs, approved on 11 September 2009 for switchboards and 9 December 2009 for cable systems, bring the total number of standards in the IEEE Std 45 series to nine,

43、 including: IEEE P45, IEEE Recommended Practice for Electrical Installations on Ships IEEE P45.1, IEEE Recommended Practice for Electrical Installations on ShipboardDesign IEEE Std 45.2-2011, IEEE Recommended Practice for Electrical Installations on ShipboardCon- trols and Automation IEEE Std 45.3-2

44、015, IEEE Recommended Practice for Shipboard Electrical InstallationsSystems Engineering IEEE P45.4, IEEE Recommended Practice for Electrical Installations on ShipboardMarine Sec- tors and Mission Systems IEEE Std 45.5-2014, IEEE Recommended Practice for Electrical Installations on ShipboardSafe- ty

45、 Considerations IEEE P45.6, IEEE Recommended Practice for Electrical Installations on ShipboardElectrical Testing IEEE Std 45.7-2012, IEEE Recommended Practice for Electrical Installations on ShipboardAC Switchboards IEEE P45.8, IEEE Recommended Practice for Electrical Installations on ShipboardCable Systems