802.1AC-2016 - IEEE Standard for Local and metropolitan area networks -- Media Access Control (MAC) Service Definition.pdf

1、IEEE Standard for Local and metropolitan area networks Media Access Control (MAC) Service Definition Sponsored by the LAN/MAN Standards Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Computer Society IEEE Std 802.1AC-2016 (Revision of IEEE Std 802.1AC-2012) IEEE Std 802.1AC-2016 (Revi

2、sion of IEEE Std 802.1AC-2012) IEEE Standard for Local and metropolitan area networks Media Access Control (MAC) Service Definition Sponsor LAN/MAN Standards Committee of the IEEE Computer Society Approved 7 December 2016 IEEE-SA Standards BoardThe Institute of Electrical and Electronics Engineers,

3、Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2017 by the Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 10 March 2017. Printed in the United States of America. IEEE and 802 are registered trademarks in the U.S. Patent fitness for a particular pur

4、pose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly

5、 voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is

6、subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE u

7、ndertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent profes

8、sional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSIN

9、ESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WH

10、ETHER SUCH DAMAGE WAS FORESEEABLE.4 Copyright 2017 IEEE. All rights reserved. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the ap

11、proved IEEE standard. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be rel

12、ied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Commen

13、ts on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should

14、 be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE a

15、nd the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would

16、 like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documen

17、ts should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements.

18、 IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are

19、made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available f

20、or use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents.5 Copyright 2017 IEEE. All rights reserved. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of

21、 any individual standard for company or organizational internal use or individual, non- commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy port

22、ions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may

23、be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at lea

24、st every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the late

25、st edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ ieeexplore.ieee.org/browse/standards/collection/ieee or contact IEEE a

26、t the address listed previously. For more information about the IEEE SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/ standards.ieee.org/

27、findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEE

28、E with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE- SA Website at http:/standards.ieee.org/about/sasb/patcom/

29、patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to o

30、btain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or deter

31、mining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the

32、 risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association.6 Copyright 2017 IEEE. All rights reserved. Participants At the time this standard was completed, the IEEE 802.1 working group had the following members

33、hip: Glenn Parsons, Chair John Messenger, Vice Chair, Maintenance Task Group Chair, Editor The following members of the individual balloting committee voted on this standard. Balloters may have voted for approval, disapproval, or abstention. SeoYoung Baek Shenghua Bao Jens Bierschenk Steinar Bjornst

34、ad Christian Boiger Paul Bottorff David Chen Feng Chen Weiying Cheng Rodney Cummings Jnos Farkas Norman Finn Geoffrey Garner Eric W. Gray Craig Gunther Marina Gutierrez Stephen Haddock Mark Hantel Patrick Heffernan Marc Holness Lu Huang Tony Jeffree Michael Johas Teener Hal Keen Stephan Kehrer Phili

35、ppe Klein Jouni Korhonen Yizhou Li Christophe Mangin Tom McBeath James McIntosh Tero Mustala Hiroki Nakano Bob Noseworthy Donald R. Pannell Walter Pienciak Michael Potts Karen Randall Maximilian Riegel Dan Romascanu Jessy V. Rouyer Eero Ryytty Soheil Samii Behcet Sarikaya Frank Schewe Michael Seaman

36、 Johannes Specht Wilfried Steiner Patricia Thaler Paul Unbehagen Hao Wang Karl Weber Brian Weis Jordon Woods Nader Zein Helge Zinner Juan Carlos Zuniga Carlos Aldana Thomas Alexander Butch Anton Lee Armstrong Stefan Aust Christian Boiger Nancy Bravin William Byrd Juan Carreon Minho Cheong Keith Chow

37、 Yezid Donoso Janos Farkas Michael Fischer Yukihiro Fujimoto Gregory Gillooly Eric W. Gray Randall Groves Craig Gunther Stephen Haddock Marek Hajduczenia Mark Hamilton Jerome Henry Marco Hernandez Werner Hoelzl Tetsushi Ikegami Noriyuki Ikeuchi Sergiu Iordanescu Atsushi Ito Tony Jeffree Michael Joha

38、s Teener Peter Jones Shinkyo Kaku Piotr Karocki Stuart Kerry Yongbum Kim Tero Kivinen Bruce Kraemer Paul Lambert James Lepp Joseph Levy Arthur H. Light William Lumpkins Elvis Maculuba Syam Madanapalli Roger Marks Arthur Marris Richard Mellitz Jose Morales Michael Newman Nick S. A. Nikjoo Satoshi Oba

39、ra Satoshi Oyama Alon Regev Robert Robinson Jessy V . Rouyer Richard Roy Bartien Sayogo Michael Seaman Shusaku Shimada Ju-Hyung Son Kapil Sood Thomas Starai Adrian Stephens Walter Struppler Pedro Tonhozi de Oliveira Mark-Rene Uchida John Vergis George Vlantis Khurram Waheed Karl Weber Hung-Yu Wei Na

40、talie Wienckowski Chun Yu Charles Wong Tan Pek Yew Oren Yuen Zhen Zhou7 Copyright 2017 IEEE. All rights reserved. When the IEEE-SA Standards Board approved this standard on 7 December 2016, it had the following membership: Jean-Philippe Faure, Chair Ted Burse, Vice-Chair John D. Kulick, Past Chair K

41、onstantinos Karachalios, Secretary *Member Emeritus Chuck Adams Masayuki Ariyoshi Stephen Dukes Jianbin Fan J. Travis Griffith Gary Hoffman Ronald W. Hotchkiss Michael Janezic Joseph L. Koepfinger* Hung Ling Kevin Lu Annette D. Reilly Gary Robinson Mehmet Ulema Yingli Wen Howard Wolfman Don Wright Y

42、u Yuan Daidi Zhong8 Copyright 2017 IEEE. All rights reserved. Introduction During the history of IEEE 802, several different MAC types have been developed, all of which have a core of functionality that is common to IEEE 802 MACs in general, but all of which also provide functionality that extends b

43、eyond that common core. An example can be found in the way priority information is conveyed in different MACs; some have no means of conveying priority, some can convey two different priority code points, some can convey eight priority code points. While such differences are not an issue in a Local

44、Area Network (LAN) that employs a single MAC technology, they can become an issue in LANs where more than one MAC technology is employed, for example in Bridged LANs. It was therefore important at an early stage of MAC Bridge development to develop a clear definition of the MAC Service that would fa

45、cilitate the definition of a common Bridging technology that could apply to all MAC types. The MAC Service definition was first standardized as ISO/IEC 15802-1:1995 B3. When the ISO/IEC standard reached its 5-year revision point, IEEE 802 was asked to take over the document and revise it to reflect

46、changes since publication. This revision emphasizes the fundamental relayable nature of the MAC Service provided to end stations by defining it in terms of the service, common to bridges and end stations, previously documented as the Internal Sublayer Service (ISS) in IEEE Std 802.1D. In addition to

47、 the material that was contained in ISO/IEC 15802-1, this standard documents the ISS that was originally defined in IEEE Std 802.1D. This standard contains state-of-the-art material. The area covered by this standard is undergoing evolution. Revisions are anticipated within the next few years to cla

48、rify existing material, to correct possible errors, and to incorporate new related material. Information on the current revision state of this and other IEEE 802 standards may be obtained from Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA This introduction is not part of IEEE Std 802.1AC-2016, IEEE Standard for Local and metropolitan area networks Media Access Control (MAC) Service Definition.