IEEE 56-2016 - IEEE Guide for Insulation Maintenance of Electric Machines.pdf

1、IEEE Guide for Insulation Maintenance of Electric MachinesIEEE Std 56-2016IEEE Power and Energy SocietySponsored by the Electric Machinery CommitteeIEEE3 Park AvenueNew York, NY 10016-5997USAIEEE Std 56-2016 IEEE Guide for Insulation Maintenance of Electric Machines Sponsor Electric Machinery Commit

2、tee of the IEEE Power and Energy Society Approved 22 September 2016 IEEE-SA Standards Board IEEE Std 56-2016 IEEE Guide for Insulation Maintenance of Electric Machines Abstract: This insulation maintenance guide is applicable to rotating electric machines rated from 35 kVA and higher. The procedures

3、 detailed herein may also be useful for insulation maintenance of other types of machines. Keywords: aging mechanisms, alternating, armature, brush, commutator, core, corona, current, distribution factor, EL CID, electric, epoxy, field, flux, Global VPI, groundwall, IEEE 56, insulation, Ionization,

4、ionizing radiation, machines, maintenance, mica, partial discharge, pitch factor, power-factor, recurrent surge oscillography, reliability, resistance temperature detector, rotating, RSO, RTD, semiconducting stress control coating, service, stator, testing, thermal cycling, thermal deterioration The

5、 Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2016 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 20 November 2016. Printed in the United States of America. IEEE is a registered trademark

6、in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH

7、 ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at

8、 the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or o

9、n behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as app

10、ropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SE

11、RVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE

12、POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered th

13、e approved IEEE standard. IEEE Std 56-2016 IEEE Guide for Insulation Maintenance of Electric Machines Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official positi

14、on of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the p

15、ersonal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice per

16、taining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions

17、 also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the sam

18、e reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes La

19、ne Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are r

20、esponsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so Copyrights IEEE draft and approved standards

21、 are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promot

22、ion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclus

23、ive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750

24、 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. IEEE Std 56-2016 IEEE Guide for Insulation Maintenance of Electric Machines Updating of IEEE Standards documents Users of IEEE Standards docum

25、ents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document togeth

26、er with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not

27、 wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or err

28、ata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE st

29、andards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject mat

30、ter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then

31、the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and c

32、onditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be re

33、quired, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this st

34、andard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association IEEE Std 56-2016 IEEE Guide for Insulation Maintenance of E

35、lectric Machines Copyright 2016 IEEE. All rights reserved. 6 Participants At the time this guide was completed, the P56 Working Group had the following membership: Douglas J. Conley, Chair David L. McKinnon, Vice Chair James Lau, Secretary David Agnew Kevin Alewine Ray Bartnikas Kevin Becker Tyler B

36、lack Stefano Bomben Andy Brown Donald Campbell William Chen Ian Culbert Eric David Sharifi Emad Tim F. Emery Jeff Fenwick Shawn A. Filliben Nancy E. Frost Paul Gaberson Tyler Gaerke Anna Gegenava Richard Gupton Gary Heuston Fon Hiew Richard Huber Claude Hudon Jeffrey Hudson Marcelo Jacob da Silva Al

37、eksandra Jeremic Aleksandr Khazanov Amir Khosravi Thomas Klamt Laurent Lamarre Gerhard Lemesch Melanie Levesque William McDermid Charles Millet Gavita Mugala Beant Nindra Sophie Noel Ramtin Omranipour Howard Penrose Ashfak Shaikh Jeffrey Sheaffer Reza Soltani Gregory C. Stone Remi Tremblay Roger Wic

38、ks Joe Williams Chuck Wilson Hugh Zhu The following members of the individual balloting committee voted on this guide. Balloters may have voted for approval, disapproval, or abstention. Martin Baur Thomas Bishop William Bloethe Stefano Bomben Andrew Brown Gustavo Brunello William Byrd Weijen Chen Do

39、uglas J. Conley Matthew Davis Gary Donner Jeff Fenwick Shawn A. Filliben Rostyslaw Fostiak Dale Fredrickson Nancy E. Frost Paul Gaberson Frank Gerleve Alexander Glaninger-Katschnig J. Travis Griffith Randall Groves Ajit Gwal Werner Hoelzl Yuri Khersonsky Heshmatollah Khosravi Joseph L. Koepfinger Ji

40、m Kulchisky Lucas Kunz William Larzelere James Lau William Lockley Omar Mazzoni William McBride William McCown William McDermid David L. McKinnon Don Mclaren Charles Millet Jerry Murphy Arthur Neubauer Michael Newman Howard Penrose Christopher Petrola Alvaro Portillo Iulian Profir Johannes Rickmann

41、Nikunj Shah Ashfak Shaikh Jeffrey Sheaffer Suresh Shrimavle Charles Simmons Jeremy Smith Jerry Smith Wayne Stec Gregory C. Stone David Tepen James Timperley Remi Tremblay John Vergis Kenneth White Dean Yager Hugh Zhu IEEE Std 56-2016 IEEE Guide for Insulation Maintenance of Electric Machines 7 Copyr

42、ight 2016 IEEE. All rights reserved. When the IEEE-SA Standards Board approved this guide on 22 September, it had the following membership: Jean-Philippe Faure, Chair Ted Burse, Vice Chair John D. Kulick, Past Chair Konstantinos Karachalios, Secretary Chuck Adams Masayuki Ariyoshi Stephen Dukes Jian

43、bin Fan J. Travis Griffith Gary Hoffman Ronald W. Hotchkiss Michael Janezic Joseph L. Koepfinger* Hung Ling Kevin Lu Annette D. Reilly Gary Robinson Mehmet Ulema Yingli Wen Howard Wolfman Don Wright Yu Yuan Daidi Zhong *Member Emeritus IEEE Std 56-2016 IEEE Guide for Insulation Maintenance of Electr

44、ic Machines 8 Copyright 2016 IEEE. All rights reserved. Introduction This introduction is not part of IEEE Std 56-2016, IEEE Guide for Insulation Maintenance of Electric Machines. This guide represents the merger of the following two standards: IEEE Std 432-1992, IEEE Guide for Insulation Maintenanc

45、e for Rotating Electrical Machinery (5 HP to less than 10 000 HP). IEEE Std 56-1990, IEEE Guide for Insulation Maintenance of Large Alternating-Current Rotating Machinery 10 000 kVA and Larger. IEEE Std 56-2016 IEEE Guide for Insulation Maintenance of Electric Machines 9 Copyright 2016 IEEE. All rights reserved. Contents 1. Overview . 1 1.1 Scope . 1 1.2 Purpose . 1 2. Normative references . 1 3. Definitions . 3 4. Safety . 4 4.1 General . 4 4.2 Machine rotation . 4 4.3 Solvents .