IEEE 802.15.4v-2017 - IEEE Standard for Low-Rate Wireless Networks - Amendment 5 Enabling Updating the Use of Regional Sub-GHz Bands.pdf

1、 IEEE Standard for Low-Rate Wireless Networks Amendment 5: Enabling/Updating the Use of Regional Sub-GHz Bands Sponsored by the LAN/MAN Standards Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Computer Society IEEE Std 802.15.4v-2017 (Amendment to IEEE Std 802.15.4-2015 as amended by

2、IEEE Std 802.15.4n-2016, IEEE Std 802.15.4q-2016, IEEE Std 802.15.4u2016, and IEEE Std 802.15.4t-2017) IEEE Std 802.15.4v-2017(Amendment to IEEE Std 802.15.4-2015, as amended by IEEE Std 802.15.4n-2016, IEEE Std 802.15.4q-2016, IEEE Std 802.15.4u-2016, and IEEE Std 802.15.4t-2017)IEEE Standard for L

3、ow-Rate Wireless NetworksAmendment 5: Enabling/Updating the Use of Regional Sub-GHz BandsSponsorLAN/MAN Standards Committee of the IEEE Computer SocietyApproved 12 May 2017IEEE-SA Standards BoardThe Institute of Electrical and Electronics Engineers, Inc.3 Park Avenue, New York, NY 10016-5997, USACop

4、yright 2017 by The Institute of Electrical and Electronics Engineers, Inc.All rights reserved. Published 30 June 2017. Printed in the United States of America.IEEE and IEEE 802 are registered trademarks in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, eff

5、ectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.”Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does

6、not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through development

7、s in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other pe

8、rson or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a give

9、n IEEE standard.IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY O

10、F LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.Translations The I

11、EEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard.3Copyright 2017 IEEE. All rights reserved.Official statements A statement,

12、written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, sy

13、mposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standardsComments for revision of IEEE Standards

14、documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together w

15、ith appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinati

16、ng Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is

17、 welcome to join the relevant IEEE working group.Comments on standards should be submitted to the following address:Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USALaws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Comp

18、liance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend

19、 to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so.Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of

20、 both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users,

21、 IEEE does not waive any rights in copyright to the documents.Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use on

22、ly. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright

23、Clearance Center.4Copyright 2017 IEEE. All rights reserved.Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments,

24、 corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old a

25、nd has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard.In order to determine whether a

26、given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEEs standards developm

27、ent process, visit the IEEE-SA Website at http:/standards.ieee.org.Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically.PatentsAtt

28、ention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent h

29、older or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant l

30、icenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses.Essential Patent Claims may exist for which a Letter of Assurance has not been recei

31、ved. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of As

32、surance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be ob

33、tained from the IEEE Standards Association.5Copyright 2017 IEEE. All rights reserved.ParticipantsAt the time this amendment was sent to sponsor ballot, the IEEE 802.15 Working Group had the following voting members:Robert F. Heile, Working Group ChairRick Alfvin, Working Group Vice ChairPatrick W. K

34、inney , Working Group Vice Chair and SecretaryJames P. K. Gilb, Working Group EditorBenjamin A. Rolfe, Working Group TreasurerPhilip E. Beecher, Task Group 4v ChairKunal Shah, Task Group 4v Vice Chair and Technical EditorChris Calvert, Task Group 4v Technical EditorKoorosh AkhavanKeiji AkiyamaHideki

35、 AoyamaTuncer BaykasMonique BrownEdgar CallawayRadhakrishna CanchiJaesang ChaSoo-Young ChangClint ChaplinHendricus De RuijterAndrew EstradaDavid EvansMatthew GillmoreTim GodfreyYoshiho GotoJussi HaapolaShinsuke HaraMarco HernandezChristopher HettKen HiragaJay HolcombIwao HosakoYeong Min JangSeong-So

36、on JooVolker JungnickelToyoyuki KatoJunhyeong KimShoichi KitazawaRyuji KohnoKeitarou KondouAnn KriegerThomas KuernerAmarjeet KumarNamtuan LeJae Seung LeeMyung LeeHuan-Bang LiQiang LiItaru MaekawaHiroyuki MatsumuraMichael McInnisCharles MilletMohammad NekouiTrang NguyenPaul NikolichMitsuaki OshimaGle

37、nn ParsonsCharles PerkinsAlbert PetrickJoe PollandClinton PowellVerotiana RabarijaonaDemir RakanovicIvan ReedeJoerg RobertRichard RobertsRuben E. Salazar CardozoNoriyuki SatoNikola SerafimovskiStephen ShellhammerShusaku ShimadaGary StuebingDon SturekKou TogashiDobroslav TsonevBilly VersoBrian WeisHi

38、detoshi YokotaJuan Carlos ZunigaMajor contributions were received from the following individuals:Philip E. Beecher Chris CalvertJay HolcombKunal ShahCopyri6ght 2017 IEEE. All rights reserved.The following members of the individual balloting committee voted on this amendment. Balloters may have voted

39、 for approval, disapproval, or abstention.Thomas AlexanderNobumitsu AmachiButch AntonStefan AustPhilip E. BeecherHarry BimsGennaro BoggiaRiccardo BramaNancy BravinWilliam ByrdChris CalvertWilliam CarneyKeith ChowPatrick DiamondMarc EmmelmannDavid EvansMichael FischerAvraham FreedmanDevon GayleJames

40、P. K. GilbJoel GoergenEric W. GrayRandall GrovesMarco HernandezWerner HoelzlNoriyuki IkeuchiSergiu IordanescuAkio IsoAtsushi ItoRaj JainSangKwon JeongJeritt KentStuart KerryYongbum KimTero KivinenYasushi KudohAmarjeet KumarJon LewisArthur H. LightMichael McInnisRonald MuriasMichael NewmanPaul Nikoli

41、chJohn NotorSatoshi OyamaBansi PatelArumugam PaventhanClinton PowellVenkatesha PrasadVerotiana RabarijaonaRobert RobinsonYongho SeokKunal ShahThomas StaraiRene StruikWalter StrupplerMark-Rene UchidaLorenzo VangelistaGeorge VlantisOren YuenZhen ZhouWhen the IEEE-SA Standards Board approved this amend

42、ment on 12 May 2017, it had the following membership:Jean-Philippe Faure, ChairGary Hoffman, Vice ChairJohn D. Kulick, Past ChairKonstantinos Karachalios, SecretaryChuck AdamsMasayuki AriyoshiTed BurseStephen DukesDoug EdwardsJ. Travis GriffithMichael JanezicThomas KoshyJoseph L. Koepfinger*Kevin Lu

43、Daleep MohlaDamir NovoselRonald C. PetersenAnnette D. ReillyRobby RobsonDorothy StanleyAdrian StephensMehmet UlemaPhil WennblomHoward WolfmanYu Yuan*Member EmeritusCopyri7ght 2017 IEEE. All rights reserved.IntroductionThis introduction is not part of IEEE Std 802.15.4v-2017, IEEE Standard for Low-Ra

44、te Wireless NetworksAmendment 5: Enabling/Updating the Use of Regional Sub-GHz Bands.This amendment defines changes to the smart utility network (SUN) physical layers (PHYs) in IEEE Std 802.15.4-2015 that enable the use of the 870876 MHz and 915921 MHz bands in Europe, the 902928 MHz band in Mexico,

45、 the 902907.5 MHz and 915928 MHz bands in Brazil, the 915928 MHz band in Australia and New Zealand, and additional Asian regional frequency bands. This amendment also changes the channel parameters listed in the SUN PHYs, the low energy critical infrastructure monitoring (LECIM) PHY, and the televis

46、ion white space (TVWS) PHY for the 470510 MHz band in China and the 863870 MHz band in Europe and aligns these channel parameters with regional requirements. The amendment includes channel access and/or timing changes to the medium access control (MAC) necessary for conformance to regional requireme

47、nts for these bands.With the rapid growth in applications for short-range devices in Europe, the Conference of Postal and Telecommunications Administrations (CEPT) Electronic Communications Committee (ECC) has designated the 870876 MHz and 915921 MHz spectrum for short-range device use. The new spec

48、trum has also been opened up in various other regions, including the 902928 MHz band in Mexico, the 902907.5 MHz and 915928 MHz bands in Brazil, the 915928 MHz band in Australia and New Zealand, and additional Asian regional frequency bands. The availability of this additional spectrum will bring co

49、nsiderable benefits, as it supports applications such as smart metering and new uses in the automotive industry.This amendment also aligns the 470510 MHz band in China and the 863870 MHz band in Europe and their channel parameters specified in IEEE Std 802.15.4-2015 with the updated regional requirements.8Copyright 2017 IEEE. All rights reserved.9Copyright 2017 IEEE. All rights reserved.Contents7. MAC frame formats.117.4 IEs117.4.4 Nested IEs117.4.4.10 SUN Device Capabilities IE1110. General PHY requirements1310.1General requirements and