BS ISO 603-5-1999 en_4385 Bonded abrasive products - Dimensions - Grinding wheels for surface grinding face grinding《粘合磨料产品.尺寸.表面 平面磨削用砂轮》.pdf

1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS ISO 603-5:1999 ICS 25.

2、100.70 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Bonded abrasive products Dimensions Part 5: Grinding wheels for surface grinding/face grindingThis British Standard, having been prepared under the direction of the Engineering Sector Committee, was published under the aut

3、hority of the Standards Committee and comes into effect on 15 November 1999 BSI 11-1999 ISBN 0 580 35701 5 BS ISO 603-5:1999 Amendments issued since publication Amd. No. Date Comments National foreword This British Standard reproduces verbatim ISO 603-5:1999 and implements it as the UK national stan

4、dard. The UK participation in its preparation was entrusted to Technical Committee MTE/13, Grinding wheels, abrasive tools, paper, cloths and powder, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on th

5、e interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standa

6、rds which implement international publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not pu

7、rport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front

8、 cover, the ISO title page, pages ii and iii, a blank page, pages 1 to 13 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued.A Referencenumbe r ISO6035:1999 (E) INTERNATIONAL STANDARD ISO 6035 Firstedition 19990715 Bondedabrasiveproducts

9、 Dimensions Part5: Grindingwheelsforsurfacegrinding/face grinding ProduitsabrasifsagglomrsDimensions Partie5:Meulespourrectificationplane/meulagelatralISO6035:1999(E) ii Contents Page 1Scop e1 2Normativereference s1 3Dimension s.2 3.1Type2:Cementedorclampedcylinderwhee l.2 3.2Type6:Straightcupwheel

10、s3 3.3Type31:Segment s.4 3.4Type35:Cementedorclampeddiscwhee l.5 3.5Type36:Discwheelwithinsertednut s6 3.6Type37:Cylinderwheelwithinsertednut s.11 4Designatio n11 5Specification s.12 5.1Tolerance s.12 5.2Balancin g.12 5.3Markin g12 Bibliography13 ISO6035:1999(E) iii Foreword ISO (the InternationalOr

11、ganizationforStandardization)isaworldwidefederationofnationalstandardsbodies(ISO memberbodies).TheworkofpreparingInternationalStandardsisnormallycarriedoutthroughISOtechnical committees.Eachmemberbodyinterestedinasubjectforwhichatechnicalcommitteehasbeenestablishedhas therighttoberepresentedonthatco

12、mmittee.Internationalorganizations,governmentalandnongovernmental,in liaisonwithISO,alsotakepartinthework.ISOcollaboratescloselywiththeInternationalElectrotechnical Commission(IEC)onallmattersofelectrotechnicalstandardization. InternationalStandardsaredraftedinaccordancewiththerulesgivenintheISO/IEC

13、Directives,Part3. DraftInternationalStandardsadoptedbythetechnicalcommitteesarecirculatedtoth ememberbodiesforvoting. PublicationasanInternationalStandardrequiresapprovalbyatleast75%ofthememberbodiescastingavote. InternationalStandardISO6035waspreparedbyTechnicalCommitteeISO/TC 29,Smalltools,subcomm

14、ittee SC5, Grindingwheelsandabrasives . Thisfirstedition,togetherwithISO6031:1999toISO6034:1999andISO6036:1999toISO 60316:1999 , cancels andreplacesISO/R603:1967,ISO6032:1981,ISO1117:1975,ISO2220:1972,ISO2933:1974,ISO 3290:1976 andISO3921:1976asatechnicalrevisionofthesestandards. ISO603consistsofthe

15、followingparts,underthegeneraltitle BondedabrasiveproductsDimensions : Part1:Grindingwheelsforexternalcylindricalgrindingbetweencentres Part2:Grindingwheelsforcentrelessexternalcylindricalgrinding Part3:Grindingwheelsforinternalcylindricalgrinding Part4:Grindingwheelsforsurfacegrinding/peripheralgri

16、nding Part5:Grindingwheelsforsurfacegrinding/facegrinding Part6:Grindingwheelsfortoolandtoolroomgrinding Part7:Grindingwheelsformanuallyguidedgrinding Part8:Grindingwheelsfordeburringandfettling/snagging Part9:Grindingwheelsforhighpressuregrinding Part10:Stonesforhoningandsuperfinishings Part11:Hand

17、finishingsticks Part12:Grindingwheelsfordeburringandfettlingonastraightgrinder Part13:Grindingwheelsfordeburringandfettlingonaverticalgrinder Part14:Grindingwheelsfordeburringandfettling/snaggingonananglegrinder Part15:Grindingwheelsforcuttingoffonstationaryormobilecuttingoffmachines Part16:Grinding

18、wheelsforcuttingoffonhandheldpowertoolsINTERNATIONALSTANDARD ISO6035:1999(E) 1 BondedabrasiveproductsDimensions Part5: Grindingwheelsforsurfacegrinding/facegrinding 1Scope ThispartofofISO603specifiesthenominaldimensions,inmillimetres,of: Type2:Cementedorclampedcylinderwheel Type6:Straightcupwheel Ty

19、pe31:Segments Type35:Cementedorclampeddiscwheel Type36:Discwheelwithinsertednuts Type37:Cylinderwheelwithinsertednuts These bondedabrasiveproductsareintendedtobeusedforsurfacegrindingwheretheworkpieceissecuredtoa reciprocatingtablethatmovesinastraightline.Theworkpieceandthegrindingwheelaremechanical

20、lyguided. 2Normativereferences The followingnormativedocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsof thispartofISO 603.Fordatedreferences,subsequentamendmentsto,orrevisionsof,anyofthesepublicationsdo notapply.However,partiestoagreementsbasedonthispartofISO 603areenc

21、ouragedtoinvestigatethe possibilityofapplyingthemostrecenteditionsofthenormativedocumentsindicatedbelow .Forundated references,thelateseditionofthenormativedocumentreferredtoapplies.MembersofISOandIECmaintain registersofcurrentlyvalidInternationalStandards. ISO525:1999, BondedabrasiveproductsGeneral

22、requirements . ISO6103:1999, BondedabrasiveproductsStaticbalancingofgrindingwheelsTesting . ISO13942: 1) , BondedabrasiveproductsLimitdeviationsandrunouttolerances . 1) Tobepublished.ISO6035:1999(E) 2 3Dimensions 3.1Type2:Cementedorclampedcylinderwheel SeeFigure1andTable1. Figure1Type2 Table1Dimensi

23、onsofType2 DTW 150 180 80 16 20 200 20 250 100 25 300 32 350/356 400/406 125 40 450/457 500/508 600/610 125 50 63 ISO6035:1999(E) 3 3.2Type6:Straightcupwheels SeeFigure2andTable2. Figure2Type6 Table2DimensionsofType6 DTHWE min. 125 63 32 13 16 150 180 80 80 32 76,2 16 20 20 200 100 125 76,2 76,2 20

24、20 20 25 20 25 250 100 125 76,2 127 76,2 127 25 25 300 100 125 127 127 25 25ISO6035:1999(E) 4 3.3Type31:Segments SeeFigures3,4and5andTables3,4and5. Figure3Type3101 Table3Dimensions ofType3101 BCL 50 60 80 80 90 90 110 110 120 120 120 120 25 25 25 30 35 35 40 40 30 40 30 40 150 200 180 200 180 200 Fi

25、gure4Type3104 Table4Dimensions ofType3104 BACLR 95 103 106 117 143 152 72 77 80 74 103,5 108 25 25 25 39 38 44 120 150 150 120 200 200 170 200 180 171,5 273 179 Figure5Type3109 Table5Dimensions ofType3109 BACL 60 70 70 80 103 103 120 152 152 54 64 64 70 94 94 106 135 135 22 25 25 40 38 38 41 63 63 1

26、10 110 150 150 150 180 200 200 250 ISO6035:1999(E) 5 3.4Type35:Cementedorclampeddiscwheel SeeFigure6andTable6. Figure6Type35 Table6DimensionsofType35 DTH max. 350/356 63 80 203,2 400/406 450/457 500/508 63 80 254 304,8 600/610 750/762 900/914 63 80 80 400 508ISO6035:1999(E) 6 3.5Type36:Discwheelwith

27、insertednuts SeeFigures7to15andTables7to15. Figure7Type36 Table7DimensionsofType36 DTH max. Insertlayout 350/356 400/406 450/457 500/508 600/610 750/762 900/914 1060/1067 63 63 80 80 80 100 100 100 120 140 50 150 50 280 SeeFigures8to15and Tables8to15 Figure8 D =350mm/356mm Table8 D =350mm/356mm Inse

28、rtlocation Rowofinserts Pitchcircle diameter Numberofholes 1 177,8 4at90 2 304,8 8at45 ISO6035:1999(E) 7 Figure9 D=400mm/406mm Figure10 D=450mm/457mm Figure11 D=500mm/508mm Table9 D=400mm/406mm Insertlocation Rowofinserts Pitchcircle diameter Numberofholes 1 190,5 5at72 2 323,85 10at36 Table10 D=450

29、mm/457mm Insertlocation Rowofinserts Pitchcircle diameter Numberofholes 1 101,6 3at120 2 203,2 5at72 3 279,4 5at72 4 374,65 10at36 Table11 D=500mm/508mm Insertlocation Rowofinserts Pitchcircle diameter Numberofholes 1 107,95 3at120 2 203,2 6at60 3 304,8 6at60 4 431,8 12at30ISO6035:1999(E) 8 Figure12

30、 D=600mm/610mm Figure13 D=750mm/762mm Table12 D=600mm/610mm Insertlocation Rowofinserts Pitchcircle diameter Numberofholes 1 203,2 6at60 2 330,2 6at60 3 457,2 6at60 4 558,8 12at30 Table13 D=750mm/762mm Insertlocation Rowofinserts Pitchcircle diameter Numberofholes 1 107,95 3at120 2 279,40 8at45 3 45

31、7,20 12at30 4 558,80 12at30 5 673,10 16at2230 ISO6035:1999(E) 9 Figure14 D =900mm/914mm Table14 D=900mm/914mm Insertlocation Numberofholes Rowofinserts Pitchcirclediameter 1 330,2 8 2 508 12 3 711,2 16 4 838,2 18ISO6035:1999(E) 10 Figure15 D=1060mm/1067mm Table15 D=1060mm/1067mm Insertlocation Numbe

32、rofholes Rowofinserts Pitchcirclediameter 1 330,2 8 2 508 12 3 609,6 8 4 711,2 16 5 838,2 4 6 914,4 24 ISO6035:1999(E) 11 3.6Type37:Cylinderwheelwithinsertednuts SeeFigure16andTable16. Figure16Type37 Table16DimensionsofType37 Insertla yout DTWD 1 Numberofholes D 2 300 350/356 400/406 450/457 500/508

33、 600/610 100 125 50 63 250 300 350 400 450 540 6at60 8at45 10at36 12at 30 M10 4Designation A complete designation ofa bonded abrasive product in accordancewiththispartofISO 603shallbeconsistofthe followinginformation: a) b) designationofthebondedabrasives,e.g.Grindingwheel; referenceofthispartofISO6

34、03; c) d) e) f) type(shape); dimensions; specificationsofaninternalnature; themaximumoperatingspeed. InaccordancewithISO525 andthispartofISO603 EXAMPLE Agrindingwheelforgrindingofflatsurfaces,Typ e 2, D=300mm , T=100mm , W=32mm , nature ofabrasiveA, grainsize 46,grade H,structure 8,natureofbon d Ban

35、damaximumoperatingspeedof3 2 m/sisdesignatedas follows: Cylinder wheelISO60352300 310032 A46H8B32m/sISO6035:1999(E) 12 5Specifications Thespecificationsarelefttothemanufacturesdiscretion,seeISO525. 5.1Tolerances LimitdeviationsandrunouttolerancesinaccordancewithISO13942. 5.2Balancing Balancingisinac

36、cordancewithISO6103. 5.3Marking MarkingofbondedabrasiveproductsisinaccordancewithISO525. ISO6035:1999(E) 13 Bibliography 1ISO84861, BondedabrasivesDeterminationanddesignationofgrainsizedistributionPart1:Macrogrits F4toF220 . 2ISO84862, BondedabrasivesDeterminationanddesignationofgrainsizedistributio

37、nPart2:Microgrits F230toF1200 .BS ISO 603-5:1999 BSI 389 Chiswick High Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

38、| | | | | | | | | | | | | | | | | | | | | | BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standa

39、rds are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using

40、this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically re

41、ceive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implem

42、entation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic inf

43、ormation services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of stan

44、dards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written pe