1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS ISO 603-7:1999 ICS 25.
2、100.70 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Bonded abrasive products Dimensions Part 7: Grinding wheels for manually guided grindingThis British Standard, having been prepared under the direction of the Engineering Sector Committee, was published under the authority
3、 of the Standards Committee and comes into effect on 15 November 1999 BSI 11-1999 ISBN 0 580 35703 1 BS ISO 603-7:1999 Amendments issued since publication Amd. No. Date Comments National foreword This British Standard reproduces verbatim ISO 603-7:1999 and implements it as the UK national standard.
4、The UK participation in its preparation was entrusted to Technical Committee MTE/13, Grinding wheels, abrasive tools, paper, cloths and powder, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the inte
5、rpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards wh
6、ich implement international publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport
7、to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover
8、, the ISO title page, pages ii and iii, a blank page, pages 1 to 7 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued.A Referencenumbe r ISO6037:1999 (E) INTERNATIONAL STANDARD ISO 6037 Firstedition 19990715 Bondedabrasiveproducts Dimens
9、ions Part7: Grindingwheelsformanuallyguidedgrinding ProduitsabrasifsagglomrsDimensions Partie7:MeulespourmeulageguidagemanuelISO6037:1999(E) ii Contents Page 1Scop e1 2Normativereference s1 3Dimension s.2 3.1Type1:Straightgrindingwhee l2 3.2Type5:Wheelrecessedononesid e3 3.3Type6:Straightcupwhee l3
10、3.4Type35:Cementedorclampeddiscwhee l.4 3.5Type36:Discwheelwithinsertednut s.4 3.6Type37:Cylinderwheelswithinsertednut s.5 4Designatio n5 5Specification s.6 5.1Tolerance s.6 5.2Balancin g.6 5.3Markin g6 Bibliography7 ISO6037:1999(E) iii Foreword ISO (the InternationalOrganizationforStandardization)i
11、saworldwidefederationofnationalstandardsbodies(ISO memberbodies).TheworkofpreparingInternationalStandardsisnormallycarriedoutthroughISOtechnical committees.Eachmemberbodyinterestedinasubjectforwhichatechnicalcommitteehasbeenestablishedhas therighttoberepresentedonthatcommittee.Internationalorganizat
12、ions,governmentalandnongovernmental,in liaisonwithISO,alsotakepartinthework.ISOcollaboratescloselywiththeInternationalElectrotechnical Commission(IEC)onallmattersofelectrotechnicalstandardization. InternationalStandardsaredraftedinaccordancewiththerulesgivenintheISO/IECDirectives,Part3. DraftInterna
13、tionalStandardsadoptedbythetechnicalcommitteesarecirculatedtoth ememberbodiesforvoting. PublicationasanInternationalStandardrequiresapprovalbyatleast75%ofthememberbodiescastingavote. InternationalStandardISO6037waspreparedbyTechnicalCommitteeISO/TC 29,Smalltools,subcommittee SC5, Grindingwheelsandab
14、rasives . Thisfirstedition,togetherwithISO6031:1999toISO6036:1999andISO6038:1999toISO 60316:1999 , cancels andreplacesISO/R603:1967,ISO6032:1981,ISO1117:1975,ISO2220:1972,ISO2933:1974,ISO 3290:1976 andISO3921:1976asatechnicalrevisionofthesestandards. ISO603consistsofthefollowingparts,underthegeneral
15、title BondedabrasiveproductsDimensions : Part1:Grindingwheelsforexternalcylindricalgrindingbetweencentres Part2:Grindingwheelsforcentrelessexternalcylindricalgrinding Part3:Grindingwheelsforinternalcylindricalgrinding Part4:Grindingwheelsforsurfacegrinding/peripheralgrinding Part5:Grindingwheelsfors
16、urfacegrinding/facegrinding Part6:Grindingwheelsfortoolandtoolroomgrinding Part7:Grindingwheelsformanuallyguidedgrinding Part8:Grindingwheelsfordeburringandfettling/snagging Part9:Grindingwheelsforhighpressuregrinding Part10:Stonesforhoningandsuperfinishings Part11:Handfinishingsticks Part12:Grindin
17、gwheelsfordeburringandfettlingonastraightgrinder Part13:Grindingwheelsfordeburringandfettlingonaverticalgrinder Part14:Grindingwheelsfordeburringandfettling/snaggingonananglegrinder Part15:Grindingwheelsforcuttingoffonstationaryormobilecuttingoffmachines Part16:Grindingwheelsforcuttingoffonhandheldp
18、owertoolsINTERNATIONALSTANDARD ISO6037:1999(E) 1 BondedabrasiveproductsDimensions Part7: Grindingwheelsformanuallyguidedgrinding 1Scope ThispartofISO603specifiesthenominaldimensions,inmillimeters,of: Type1:Straightgrindingwheel Type5:Wheelrecessedononeside Type6:Straightcupwheel Type35:Cementedorcla
19、mpeddiscwheel Type36:Discwheelwithinsertednuts Type37:Cylinderwheelswithinsertednuts Thesebondedabrasiveproductsareintendedtobeusedforthegrindingofanysurfac e and regrinding of workpieces. Theworkpieceisguidedbyhand,thegrindingwheelisfixed. 2Normativereferences The following normativedocumentscontai
20、nprovisionswhich,throughreferenceinthistext,constituteprovisionsof this partofISO 603.Fordatedreferences,subsequentamendmentsto,orrevisionsof,anyofthesepublicationsdo notapply.However,partiestoagreementsbasedonthispartofISO 603areencouragedtoinvestigatethe possibilityofapplyingthemostrecenteditionso
21、fthenormativedocumentsindicatedbelow.For undated references,thelateseditionofthenormativedocumentreferre dtoapplies.MembersofISOandIECmaintain registersofcurrentlyvalidInternationalStandards. ISO525:1999, BondedabrasiveproductsGeneralrequirements . ISO6035:1999, BondedabrasiveproductsDimensions Grin
22、dingwheelsforsurfacegrinding/facegrinding. ISO6103:1999, BondedabrasiveproductsStaticbalancingofgrindingwheelsTesting . ISO13942: 1) , BondedabrasiveproductsLimitdeviationsandrunouttolerances . 1) Tobepublished.ISO6037:1999(E) 2 3Dimensions 3.1Type1:Straightgrindingwheel SeeFigure1andTable1. Figure1
23、Type1 Table1DimensionsofType1 DTH 13 20 25 32 40 50 63 80 100 100XX 16 20 125XX 20 32 150XX 20 32 200 250 X X X X 32 300 XX 32 50,8 76,2 350/356 X X X 32 50,8 76,2 400/406 XXX 50,8 76,2 127 450/457 XXX 50,8 76,2 127 152,4 500/508 XXX 50,8 127 152,4 203,2 600/610 XXX 76,2 127 203,2 304,8 750/762 XXX
24、203,2 304,8 ISO6037:1999(E) 3 3.2Type5:Wheelrecessedononeside SeeFigure2andTable2. Figure2Type5 Table2DimensionsofType5 DT H PFR max 20 32 50,8 76,2 127 150 32 X X 80 16 175 32 X X 90 16 3,2 200 40 X X 110 20 250 300 400 40 40 45 50 50 X X X X 150 150 215 20 20 25 25 5 3.3Type6:Straightcupwheel SeeF
25、igure3andTable3. Figure3Type6 Table3DimensionsofType6 DT H WE min. 13 20 25 32 50,8 76,2 50 32 X 8 8 80 100 40 50 X X 10 10 10 125 63 X X 13 13 150 80 X 16 16 175 80 X X X X 20 20 200 100 X X X X 20 20ISO6037:1999(E) 4 3.4Type35:Cementedorclampeddiscwheel SeeFigure4andTable4. Figure4Type35 Table4Dim
26、ensionsofType35 DTH 350/356 63 80 203,2 400/406 254 450/457 500/508 63 80 304,8 600/610 750/762 900/914 63 80 80 400 508 3.5Type36:Discwheelwithinsertednuts SeeFigure5andTable5. Figure5Type36 Table5DimensionsofType36 DTH max. Insertlayout 350/356 400/406 450/457 500/508 600/610 750/762 900/914 63 63
27、 80 80 80 100 100 100 120 140 50 150 50 280 SeeFigures8to14and Tables8to14in ISO6035:1999 ISO6037:1999(E) 5 3.6Type37:Cylinderwheelswithinsertednuts SeeFigure6andTable6. Figure6Type37 Table6DimensionsofType37 Insertlayout DTWD 1 Numberofholes D 2 400/406 450/457 500/508 600/610 100 125 50 63 350 400
28、 450 540 8at45 10at36 12at30 M10 4Designation Acompletedesignationofabondedabrasiveproductinaccordancewit h this part of ISO 603 shall be consist of the followinginformation: a) b) designationofthebondedabrasives,e.g.Grindingwheel; referenceofthispartofISO603; c) d) e) f) type(shape); dimensions; sp
29、ecificationsofaninternalnature; themaximumoperatingspeed. InaccordancewithISO525 andthispartofISO603 EXAMPLE Adiscwheelwithinsertdnutsforoffhandgrinding,Typ e36, D=500mm , T=80mm , H=50mm ,natureof abrasiveA,grainsize46,gradeH,structure8,natureofbondBandamaximumoperatingspeedof3 2m/sis designatedasf
30、ollows: Disc wheelISO603736500 380 350 A46H8B32m/sISO6037:1999(E) 6 5Specifications Thespecificationsarelefttothemanufacturesdiscretion,seeISO525. 5.1Tolerances LimitdeviationsandrunouttolerancesinaccordancewithISO13942. 5.2Balancing BalancingisinaccordancewithISO6103. 5.3Marking Markingofbondedabra
31、siveproductsisinaccordancewithISO525. ISO6037:1999(E) 7 Bibliography 1ISO84861, BondedabrasivesDeterminationanddesignationofgrainsizedistributionPart1:MacrogritsF4 toF220 . 2ISO84862, BondedabrasivesDeterminationanddesignationofgrainsizedistributionPart2:Microgrits F230toF1200 .BS ISO 603-7:1999 BSI
32、 389 Chiswick High Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BSI Brit
33、ish Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of B
34、ritish Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of
35、the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying stand
36、ards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as Britis
37、h Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give deta
38、ils on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits conta
39、ct Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988
40、no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such
41、 as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1