1、BRITISH STANDARD BS ISO 6199:2005 Micrographics Microfilming of documents on 16 mm and 35 mm silver-gelatin type microfilm Operating procedures ICS 37.080 BS ISO 6199:2005 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 24 January 2006 BSI 24
2、 January 2006 ISBN 0 580 47288 4 National foreword This British Standard reproduces verbatim ISO 6199:2005 and implements it as the UK national standard. It supersedes BS ISO 6199:1991 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee IDT/1/2, Applicati
3、ons, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI Catalogue under the section
4、entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compl
5、iance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related int
6、ernational and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii to iv, pages 1 to 19 and a back cover. The BSI copyright notice displayed in this document indicates when the document was l
7、ast issued. Amendments issued since publication Amd. No. Date Comments Reference number ISO 6199:2005(E)INTERNATIONAL STANDARD ISO 6199 Second edition 2005-06-15 Micrographics Microfilming of documents on 16 mm and 35 mm silver- gelatin type microfilm Operating procedures Micrographie Microfilmage d
8、es documents sur microfilms glatino- argentiques de 16 mm et 35 mm Modes opratoires BS ISO 6199:2005 ii iii Contents Page Foreword iv 1 Scope . 1 2 Normative references . 1 3 Terms and definitions. 2 4 Preparation of documents . 2 5 Conditions of microfilming 2 5.1 Raw-stock microfilm. 2 5.2 Formats
9、 and orientation. 2 5.3 Roll film coding . 5 5.4 Frame numbering 5 5.5 Placement 5 5.6 Inter-image gap . 5 5.7 Edge marker 5 5.8 Reduction ratio 5 5.9 Document dimensions . 6 6 Microfilming procedures 9 6.1 Documents recorded on more than one roll of film 9 6.2 Leader and trailer 9 7 Filming sequenc
10、e 9 7.1 Targets . 9 7.2 Archival test area 10 7.3 Retakes 10 7.4 Targets . 10 8 Scanning microfilm. 12 8.1 Cameras used for producing scanning microfilm. 12 8.2 Frame numbering 12 8.3 Placement 12 8.4 Edge detection 12 8.5 Targets . 12 8.6 Image density 13 8.7 Skew. 13 8.8 Resolution . 13 9 Splices
11、. 13 10 Document placement on the camera baseboard. 13 11 Winding 13 12 Quality control. 14 13 Legal Admissibility . 14 Annex A (informative) Preparation of documents 15 Annex B (informative) Resolution. 17 Bibliography . 19 BS ISO 6199:2005iv Foreword ISO (the International Organization for Standar
12、dization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to
13、 be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Stan
14、dards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an Int
15、ernational Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 6199
16、was prepared by Technical Committee ISO/TC 171, Document management applications, Subcommittee SC 2, Application issues. This second edition cancels and replaces the first edition (ISO 6199:1991), which has been technically revised. BS ISO 6199:2005 1 Micrographics Microfilming of documents on 16 mm
17、 and 35 mm silver-gelatin type microfilm Operating procedures 1 Scope This International Standard specifies procedures that enable a camera operator to produce microfilm of appropriate quality of presentation and legibility, capable of yielding scanned images of acceptable quality. This Internationa
18、l Standard specifies methods for microfilming documents on 16 mm and 35 mm silver-gelatin microfilm, including orientation of images on microfilm, use of non-image areas and information required to facilitate identification of the microfilm. This International Standard applies to microfilming using
19、rotary and planetary cameras. This International Standard does not apply to the filming of technical drawings, maps and plans and newspapers, for which specific International Standards exist 1-3. 2 Normative references The following referenced documents are indispensable for the application of this
20、document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 3334: 1) , Micrographics ISO resolution test chart No. 2 Description and use ISO 6148:2001, Photography Micrographic films, sp
21、ools and cores Dimensions ISO 6196 (parts 1 to 8 and 10), Micrographics Vocabulary ISO 6200:1999, Micrographics First generation silver-gelatin microforms of source documents Density specifications and method of measurement ISO 9878:1990, Micrographics Graphical symbols for use in microfilming ISO/T
22、R 10200:1990, Legal admissibility of microforms ISO 10550:1994, Micrographics Planetary camera systems Test target for checking performance ISO 10594, Micrographics Rotary camera systems Test target for checking performance ISO 11962:2002, Micrographics Image mark (blip) used with 16 mm and 35 mm ro
23、ll microfilm ISO 18906:2000, Imaging materials Photographic films Specifications for safety film 1) To be published. (Revision of ISO 3334:1989) BS ISO 6199:20052 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 6196 and the following apply. 3.1 inter
24、-image gap inter-frame gap distance, measured along the long edge of a roll microfilm, between the trailing edge of one microimage and the leading edge of the following microimage 3.2 scanning microfilm microfilm intended to be used for scanner input 4 Preparation of documents Documents to be microf
25、ilmed shall be examined carefully, defects remedied where appropriate, foreign bodies (e.g. fasteners) removed and pages arranged in the required order. Documents to be microfilmed shall be examined to ensure that their dimensions are within those acceptable to the microfilming system. Appropriate t
26、argets shall be added to each batch of documents during the preparation stage. Annex A gives more details on the preparation of documents prior to microfilming. 5 Conditions of microfilming 5.1 Raw-stock microfilm Raw-stock microfilm shall comply with the requirements of ISO 6148 and ISO 18906. 5.2
27、Formats and orientation 5.2.1 Formats The formats commonly used in roll microfilm are shown in Figure 1. The dimensions for the placement of the microimages on the film are listed in Table 1. Table 1 Dimensions of frames for unperforated film without document marks (see Figure 1) Values in millimetr
28、es Dimension Measure 16 mm film 35 mm film a max. image width 14,92 33,00 ac min. inter-image gap 1,00 2,00 d min. side margin 0,50 0,97 e min. side margin 0,50 0,97 f min. bcentre margin 0,50 0,97 NOTE Film width (e.g. a + 2d) shall be in accordance with ISO 6148. Image areas are smaller.aFor some
29、applications, this figure may change in accordance with the relevant International Standard. bFor all formats except simplex. BS ISO 6199:2005 3Alternate orientation for documents with right to left scripts Preferred orientation for documents with horizontal and right to left scripts Figure 1 Roll m
30、icrofilm formats BS ISO 6199:20054 NOTE 1 On the duplex format, the image orientation of one row (front) is controlled by the orientation of the text on the original page, and the image orientation of the opposite row (back) is controlled by the image orientation of the above mentioned row. NOTE 2 T
31、he duo duplex format is used primarily in banking applications. aFront and back of first document bAscending order cFirst (or last) document dAscending (or descending) order Figure 1 (continued) BS ISO 6199:2005 5 5.2.2 Orientation Where microimages are recorded in simplex format, horizontal mode (c
32、omic), orientations 1B and 2B of Figure 1 shall be used. Where simplex format, vertical mode (cine) is used, the microimages should be oriented as shown in 1A and 2A of Figure 1. The orientation of microimages for filming in duplex, duo and combination duo-duplex formats is also shown in Figure 1. 5
33、.3 Roll film coding Microimages may be coded so that individual microimages or series of microimages can be easily located. Examples of coding systems are specified in ISO 11962. 5.4 Frame numbering Where frame numbers are used, they shall not appear within the microimage frame area. They may appear
34、 towards either edge of the microfilm, or within the inter-image gap, offset towards the top or bottom of the gap. Frame numbers shall not exceed 2 mm in height, measured on the microfilm. The positioning of the frame numbers shall remain consistent within a roll of microfilm. See also 8.2. 5.5 Plac
35、ement Microimages shall be centrally placed across the width of the frame area, with at least 30 % of each microimage in each half of the useable width of the microfilm. See also 8.3. 5.6 Inter-image gap The inter-image gap shall be as specified in Table 1. NOTE When using scanning microfilm, this i
36、nter-image gap is crucial to the detection of the image edge (see 8.4). 5.7 Edge marker This subclause applies to microfilming using planetary cameras only. Where the leading edge of a document to be microfilmed is so irregular that there is no segment of this edge that can be said to define the pos
37、ition of the edge unambiguously, a matt white bar of minimum width 3 mm shall be placed on the camera baseboard, parallel to the leading edge of the microimage area, and just touching the leading edge of the document. The length of the bar shall be sufficient to extend across the whole width of the
38、microimage area. 5.8 Reduction ratio The reduction ratio and orientation selected should allow the smallest alphanumeric characters to be legible in a distribution copy projected on a reader screen and on a hard copy made from a distribution copy. The reduction ratio to be used shall be determined b
39、y the size of the characters, the quality of the originals, the quality of the camera-film system, and the size of the documents to be microfilmed. Where possible, horizontal mode should be used. BS ISO 6199:20056 5.9 Document dimensions 5.9.1 General The maximum height or width of a microimage that
40、 can be recorded on the usable width of the film is indicated in Table 1 and Figure 1 for uncoded film and Figure 2 for coded film. NOTE The maximum height or width of the document depends on the film format, the reduction ratio and the type of camera (rotary or planetary) to be used. 5.9.2 Simplex
41、format using rotary cameras The side of a microimage which is parallel to the length of the film may be of any length. Table 2 lists two of the most commonly used reduction ratios for the simplex format of uncoded film from 16 mm rotary cameras. If a microimage is close to the indicated recordable s
42、ize, a higher reduction ratio shall be used to reduce the possibility of information loss caused by skewing of the document while it is being filmed. NOTE The maximum dimensions of a document that can be filmed are determined by the width of the throat of the document feeder. Table 2 16 mm rotary mi
43、crofilm camera Simplex format for uncoded film Values in millimetres Nominal reduction ratio Maximum dimension of document side perpendicular to the long axis of the film 1:20 1:24 298 357 Dimensions in millimetres aChannel reserved for document mark. Figure 2 Channels provided for document marks (b
44、lips) and optical code format BS ISO 6199:2005 7 5.9.3 Simplex format using planetary cameras Simplex format is also used with planetary cameras that can have variable (or a set of fixed) reductions and a variable frame pitch. Table 3 lists the maximum dimensions of documents usable with various red
45、uction ratios. For microfilming using fixed frame-pitch cameras, see Table 4 and Figure 3. NOTE To allow for positioning errors, the actual dimensions of the documents should be less than those indicated. For 35 mm film intended for insertion in A6 jackets as strips of three frames, the maximum fram
46、e pitch shall be 47,5 mm. Appropriate reduction ratio changes may be required to accommodate the shorter frame advance. Table 3 Planetary roll microfilm camera with adjustable frame pitch Maximum dimensions of documents Values in millimetres Maximum dimensions of documents 16 mm microfilm 35 mm micr
47、ofilm Reduction ratio aLength Width Length Width 1:6 1:8 1:10 1:12 1:14 1:15 1:16 1:18 1:20 1:21 1:22 1:24 1:26 1:27 1:28 1:29 1:30 1:32 1:34 1:36 229 305 381 457 533 572 610 686 762 800 838 914 991 1 029 1 067 1 105 1 143 1 219 1 295 1 372 90 120 150 180 210 225 240 270 300 315 330 360 390 405 420
48、435 450 480 510 540 267 356 444 533 622 667 711 800 889 933 978 1 067 1 156 1 200 1 245 1 289 1 334 1 422 1 511 1 600 190 254 318 381 444 476 508 572 635 667 698 762 826 857 889 921 952 1 016 1 080 1 143 aCaution, actual reduction ratios used in practice may be different to those indicated in this t
49、able. Relevant measurements can be calculated by applying the reduction ratio to the image frame dimensions. BS ISO 6199:20058 Table 4 Planetary roll film camera with fixed film advance (see Figure 3) Values in millimetres 35 mm microfilm Dimensions Frame (a b) 00 0,5 0,5 33 45 Frame pitch (t) 0 1,2 52 Figure 3 Frame and frame pitch 5.9.4 Simplex format coding Simplex format is also used with microfilm that is coded along
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1