1、BS ISO 7739:2016 Cinematography Two-track photographic analogue sound records on 16 mm motion- picture prints Positions and width dimensions BSI Standards Publication WB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS ISO 7739:2016 BRITISH STANDARD National foreword This British Standard is
2、the UK implementation of ISO 7739:2016. The UK participation in its preparation was entrusted to Technical Committee CPW/36, Cinematography. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessa
3、ry provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 2016 ISBN 978 0 580 91746 2 ICS 37.060.20 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard
4、 was published under the authority of the Standards Policy and Strategy Committee on 31 July 2016. Amendments issued since publication Date Text affectedBS ISO 7739:2016 ISO 2016 Cinematography Two-track photographic analogue sound records on 16 mm motion-picture prints Positions and width dimension
5、s Cinmatographie Enregistrement de deux pistes sonores optiques analogues sur copies dexploitation cinmatographiques 16 mm Positions et dimensions en largeur INTERNATIONAL STANDARD ISO 7739 Second edition 2016-07-01 Reference number ISO 7739:2016(E)BS ISO 7739:2016ISO 7739:2016(E)ii ISO 2016 All rig
6、hts reserved COPYRIGHT PROTECTED DOCUMENT ISO 2016, Published in Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet
7、or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copy
8、rightiso.org www.iso.orgBS ISO 7739:2016ISO 7739:2016(E)Foreword iv 1 Scope . 1 2 Normative references 1 3 Positions and dimensions . 1 4 Sound records 1 5 Picture-sound displacement 1 6 Track usage 1 ISO 2016 All rights reserved iii Contents PageBS ISO 7739:2016ISO 7739:2016(E) Foreword ISO (the In
9、ternational Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee h
10、as been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical
11、 standardization. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in a
12、ccordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. De
13、tails of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document is information given for the convenience of users and does not constitute an
14、 endorsement. For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information The committee
15、 responsible for this document is ISO/TC 36, Cinematography. This second edition cancels and replaces the first edition (ISO 7739:1983), of which it constitutes a minor revision.iv ISO 2016 All rights reservedBS ISO 7739:2016INTERNATIONAL ST ANDARD ISO 7739:2016(E) Cinematography Two-track photograp
16、hic analogue sound records on 16 mm motion-picture prints Positions and width dimensions 1 Scope This International Standard specifies the lateral positions and width dimensions of two-track variable area sound records on 16 mm motion-picture prints. This International Standard also specifies the ar
17、ea scanned by the sound reproducer. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the refe
18、renced document (including any amendments) applies. ISO 4243, Cinematography Picture image area and photographic sound record on 16 mm motion-picture release prints Positions and dimensions 3 Positions and dimensions The positions and dimensions of the two sound records shall be as shown in Figure 1
19、 and given in Table 1. In all other respects, the sound records shall comply with ISO 4243. 4 Sound records 4.1 Channel 1 and channel 2 recording and reproducing slit images shall be positioned in line at an angle 90 5 to the reference edge of the film. 4.2 Channel 2 shall be recorded in the record
20、nearest the outer edge of the film, as shown in Figure 1. 4.3 The septum between channel records shall be effectively opaque on prints. A lighter septum resulting from direct positive recordings being printed on reversal print materials should not be cause for rejection of prints. 5 Picture-sound di
21、splacement The picture-sound displacement shall be as specified in ISO 4243. 6 Track usage The two tracks specified in this International Standard may be used for either related stereophonic material or unrelated material. When used for two-channel stereophonic program material, track 1 shall be use
22、d for the left (as viewed from the auditorium) loudspeaker channel and track 2 shall be used for the right (as viewed from the auditorium) loudspeaker channel. It is recommended that the container and leader of the print having two sound records be labelled with the above information. ISO 2016 All r
23、ights reserved 1BS ISO 7739:2016ISO 7739:2016(E) Dimensions B and C were chosen to ensure separation of channel 1 and channel 2 signals upon reproduction. Projector manufacturers will probably want to reduce the guard band between channel 1 and channel 2 scanned areas as much as possible so that the
24、 projector will be fully compatible with sound records bearing a single channel and made in accordance with ISO 4243. However, the crosstalk between them should not be less than 20 dB for stereophonic material, and not less than 26 dB for unrelated material. 1 2 3 4 5 Key 1 track 1 2 track 2 3 refer
25、ence edge 4 direction of film travel 5 area scanned by reproducer Figure 1 Two photographic sound tracks on 16 mm motion-picture prints2 ISO 2016 All rights reservedBS ISO 7739:2016ISO 7739:2016(E) Table 1 Dimensions Dimension mm in A ref. 13,71 0,540 B 14,35 0,05 0,565 0,002 C 14,60 0,05 0,575 0,00
26、2 D ref. 15,24 0,600 E ref. 14,48 0,03 0,570 0,001 F max. 0,05 0,002 G ref. 1,80 0,071 ISO 2016 All rights reserved 3BS ISO 7739:2016ISO 7739:2016(E) ISO 2016 All rights reserved IC S 37.060.20 Price based on 3 pagesThis page deliberately left blankBSI is the national body responsible for preparing
27、British Standards and other standards-related publications, information and services. BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited. British Standards Institution (BSI) About us We bring together business, industry,
28、government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions. The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and
29、 across all sectors choose standards to help them achieve their goals. Information on standards We can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centr
30、e. Buying standards You can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organiz
31、ations, hard copies can be ordered from our Customer Services team. Copyright in BSI publications All the content in BSI publications, including British Standards, is the property of and copyrighted by BSI or some person or entity that owns copyright in the information used (such as the internationa
32、l standardization bodies) and has formally licensed such information to BSI for commercial publication and use. Save for the provisions below, you may not transfer, share or disseminate any portion of the standard to any other person. You may not adapt, distribute, commercially exploit, or publicly
33、display the standard or any portion thereof in any manner whatsoever without BSIs prior written consent. Storing and using standards Standards purchased in soft copy format: A British Standard purchased in soft copy format is licensed to a sole named user for personal or internal company use only. T
34、he standard may be stored on more than 1 device provided that it is accessible by the sole named user only and that only 1 copy is accessed at any one time. A single paper copy may be printed for personal or internal company use only. Standards purchased in hard copy format: A British Standard purch
35、ased in hard copy format is for personal or internal company use only. It may not be further reproduced in any format to create an additional copy. This includes scanning of the document. If you need more than 1 copy of the document, or if you wish to share the document on an internal network, you c
36、an save money by choosing a subscription product (see Subscriptions). Reproducing extracts For permission to reproduce content from BSI publications contact the BSI Copyright & Licensing team. Subscriptions Our range of subscription services are designed to make using standards easier for you. For f
37、urther information on our subscription products go to With British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in to
38、uch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard co
39、py of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit With a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many use
40、rs as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email . Revisions Our British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and servi
41、ces to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre. Useful Contacts Customer Services Tel: +44 345 086 9001 Email (orders): Email (enquiries): Subscriptions Tel: +44 345 086 9001 Email: Knowledge Centre Tel: +44 20 8996 7004 Email: Copyright & Licensing Tel: +44 20 8996 7070 Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BSI Group Headquarters 389 Chiswick High Road London W4 4AL UK BSI Back Cover.indd 1 27/01/2016 14:20
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1