BS ISO 8018-2007 en_4981 Tools for moulding - Guide bushes headed and locating guide bushes headed《模制工具.有头的导套和有头的定位导套》.pdf

1、BRITISH STANDARD BS ISO 8018:2007 Tools for moulding Guide bushes, headed, and locating guide bushes, headed ICS 25.120.30 BS ISO 8018:2007 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2007 BSI 2007 ISBN 978 0 580 50193 7 Natio

2、nal foreword This British Standard was published by BSI. It is the UK implementation of ISO 8018:2007. It supersedes BS 7564-4:1992 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee MTE/12, Tools for pressing and moulding. A list of organizations repres

3、ented on MTE/12 can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued

4、 since publication Amd. No. Date Comments Reference number ISO 8018:2007(E)INTERNATIONAL STANDARD ISO 8018 Second edition 2007-02-01 Tools for moulding Guide bushes, headed, and locating guide bushes, headed Outillage de moulage Bagues de guidage, collerette et collerette avec plot de centrage BS IS

5、O 8018:2007ii iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a sub

6、ject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (I

7、EC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical commit

8、tees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be

9、 held responsible for identifying any or all such patent rights. ISO 8018 was prepared by Technical Committee ISO/TC 29, Small tools, Subcommittee SC 8, Tools for pressing and moulding. This second edition cancels and replaces the first edition (ISO 8018:1985), of which it constitutes a minor revisi

10、on. In particular, the references given in Clause 2, which are not mentioned in the text, have been listed in a Bibliography, and the indication of surface textures has been updated in accordance with ISO 1302:2002. BS ISO 8018:2007 blank1 Tools for moulding Guide bushes, headed, and locating guide

11、bushes, headed 1 Scope This International Standard specifies the dimensions and tolerances, in millimetres, for headed guide bushes and headed locating guide bushes intended for use in moulds. 2 Dimensions 2.1 Guide bushes, headed Type A The dimensions of headed guide bushes of type A shall conform

12、to the indications of Figure 1 and Table 1. Surface roughness values in micrometres NOTE The sketch is an example only. aChamfer and a cylindrical entry over 3 mm. bR u 0,1S. Figure 1 Guide bushes, headed Type A BS ISO 8018:20072 Table 1 Dimensions of guide bushes, headed Type A D a12 16 20 25 32 40

13、 50 D 118 22 28 32 40 50 63 D 222 26 32 36 45 56 71 S 4 6 6 6 8 8 8 L 1L 16 20 25 16 20 25 16 20 25 16 20 25 20 25 32 40 50 32 32 32 32 40 50 32 40 50 32 40 50 32 40 50 63 80 100 63 63 63 80 80 63 80 80 63 80 100 63 80 100 80 100 125 160 200 100 100 100 125 100 100 125 a For use in exceptional cases

14、, for instance, to prevent incorrect assembly of the upper and lower plates of the mould in relation to each other, the following additional values for diameter D are recommended : 11, 15, 19, 24, 30, 38 and 48BS ISO 8018:20073 2.2 Locating guide bushes, headed Type B The dimensions of headed locati

15、ng guide bushes of type B shall conform to the indications of Figure 2 and Table 2. Surface roughness values in micrometres NOTE The sketch is an example only. aChamfer and a cylindrical entry over 3 mm. bR u 0,1S. Figure 2 Locating guide bushes, headed Type B BS ISO 8018:20074 Table 2 Dimensions of

16、 locating guide bushes, headed Type B D a12 16 20 25 32 40 50 D 118 22 28 32 40 50 63 D 222 26 32 36 45 56 71 S 4 6 6 6 8 8 8 L 1L 2L 20 25 32 16 20 25 20 25 32 25 32 25 32 25 32 40 50 60 32 40 50 32 32 32 32 40 40 40 40 40 40 40 50 50 71 90 112 63 80 100 40 50 40 50 63 40 63 63 50 63 63 80 100 132

17、170 210 125 160 200 63 63 80 80 80 80 100 100 125 100 100 125 a For use in exceptional cases, for instance, to prevent incorrect assembly of the upper and lower plates of the mould in relation to each other, the following additional values for diameter D are recommended : 11, 15, 19, 24, 30, 38 and

18、48.3 Designation A guide bush in accordance with this International Standard shall be designated by: a) “guide bush“; b) a reference to this International Standard; c) type of guide bush (A or B); d) its internal diameter (D); e) its length (L). EXAMPLE Guide bush ISO 8018 A 12 20 Guide bush ISO 801

19、8 B 12 20 BS ISO 8018:20075 Bibliography 1 ISO 1302:2002, Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation 2 ISO 4957:1999, Tool steels 3 ISO 6753-2:1998, Tools for pressing and moulding Machined plates Part 2: Machined plates for moulds 4 ISO

20、 8017, Tools for moulding Guide pillars, straight and shouldered, and locating guide pillars, shouldered BS ISO 8018:2007BS ISO 8018:2007 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It pr

21、esents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of

22、BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20

23、 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Cust

24、omer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British

25、 Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give detai

26、ls on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of th

27、ese and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the

28、BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in

29、 a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.