BS ISO 98-2001 en_6620 Textile machinery and accessories - Spinning preparatory and spinning machinery - Main dimensions of coverings for top rollers《纺织机械和附件.纺纱准备和纺纱机械.上卷轴的包纱性能》.pdf

1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS ISO 98:2001 ICS 59.120

2、.10 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Textile machinery and accessories Spinning preparatory and spinning machinery Main dimensions of coverings for top rollersThis British Standard, having been prepared under the direction of the Sector Committee for Materials a

3、nd Chemicals, was published under the authority of the Standards Committee and comes into effect on 15 April 2001 BSI 04-2001 ISBN 0 580 36986 2 BS ISO 98:2001 Amendments issued since publication Amd. No. Date Comments National foreword This British Standard reproduces verbatim ISO 98:2001 and imple

4、ments it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee TCI/33, Textile machinery, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interp

5、retation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards whic

6、h implement international publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to

7、 include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover,

8、the ISO title page, pages ii and iii, a blank page, pages 1 to 4, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued.INTERNATIONAL STANDARD ISO 98 Third edition 2001-03-01 Reference number ISO 98:2001(E) Textile mach

9、inery and accessories Spinning preparatory and spinning machinery Main dimensions of coverings for top rollers Matriel pour lindustrie textile Matriel de prparation de filature et de filature Dimensions principales des garnitures pour cylindres suprieursISO 98:2001(E) iiISO 98:2001(E) iii Foreword I

10、SO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical com- mittees. Each member body interested in a subject for which a technical

11、 committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liai- son with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of el

12、ectrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard require

13、s approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. International Standard

14、 ISO 98 was prepared by Technical Committee ISO/TC 72, Textile machinery and machinery for dry-cleaning and industrial laundering, Subcommittee SC 1, Spinning preparatory, spinning, twisting and winding machinery and accessories. This third edition cancels and replaces the second edition (ISO 98:197

15、7), which has been technically revised.INTERNATIONAL STANDARD ISO 98:2001(E) 1 Textile machinery and accessories Spinning preparatory and spinning machinery Main dimensions of coverings for top rollers 1 Scope This International Standard specifies the main dimensions of coverings for ready-for-use t

16、op rollers (synthetic cover- ings). It is applicable to spinning preparatory and spinning machinery. 2S y m b o l s bare roller diameter diameter with covering (finished ground) width of covering saddle force B type of execution of covering with rectangular sides (see Figure 1 and Figure 2) C type o

17、f execution of covering with beveled sides (see Figure 1 and Figure 2) D type of execution of covering with rounded sides (see Figure 1 and Figure 2) d 1 d 2 b FISO 98:2001(E) 2 3 Dimensions 3.1 Single-boss top rollers The main dimensions of coverings for single-boss top rollers used for spinning pr

18、eparatory machinery (e.g. draw- frames and comber), are given in Figure 1 and Tables 1, 2 and 3 (see Figure 2 for twin-boss top rollers). In the case of single-boss top rollers with removable bushings execution is similar to that shown in Figure 3. Figure 1 Diameters and covering widths for single-b

19、oss top rollers Table 1 Bare roller diameter Dimensions in millimetres 16 18 19 23 26 28 30 35 40 45 50 55 60 65 70 75 80 NOTE For , in increments of 10. Table 2 Roller diameter with covering (finished ground) Dimensions in millimetres 25 28 32 34 36 40 45 50 55 60 65 70 75 80 85 90 NOTE For , in in

20、crements of 10. Table 3 Width of covering Dimensions in millimetres 80 90 100 110 125 140 160 180 200 220 250 280 315 355 400 450 d 1 d 1 80 d 2 d 2 90 bISO 98:2001(E) 3 3.2 Twin-boss top rollers The main dimensions of coverings for twin-boss top rollers used for spinning and roving frames are given

21、 in Figure 2 and Tables 4, 5 and 6. In the case of twin-boss top rollers with removable bushings, execution is similar to that shown in Figure 3. Figure 2 Diameters and covering widths for twin-boss top rollers Table 4 Bare roller diameter Dimensions in millimetres 19 23 25 28 30 35 40 45 50 55 60 N

22、OTE For , in increments of 10. Table 5 Roller diameter with covering (finished ground) Dimensions in millimetres 25 28 30 32 35 40 45 50 55 60 65 70 75 80 NOTE For , in increments of 5. Table 6 Width of covering Dimensions in millimetres 25 28 30 32 34 35 40 45 50 55 60 NOTE For , in increments of 1

23、0. Figure 3 Covering fixed to a removable bushing d 1 d 1 60 d 2 d 2 80 b b60ISO 98:2001(E) 4 4 Designation of coverings The designation shall include a reference to this International Standard, followed by the dimensions , and ex- pressed in millimetres, the Shore A hardness, the type of execution

24、and the saddle force expressed in decanew- tons. If no specification is given by the buyer, the manufacturer may supply any of the three executions, B, C or D. EXAMPLE A covering in accordance with ISO 98 of dimensions , and , a Shore A hard- ness of 80, of execution type B and a force decanewtons i

25、s designated as follows: ISO 98-28 40 160-80-B-40 d 1 d 2 b F d 1 = 28 mm d 2 = 40 mm b = 160 mm F = 40BS ISO 98:2001 BSI 389 Chiswick High Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

26、 | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international

27、 level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would

28、be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updatin

29、g service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. Standards are also avai

30、lable from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on

31、national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048.

32、Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Further information about BSI is availab

33、le on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced,

34、 stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type o

35、r grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.