BS ISO 8114-1993 Textile machinery and accessories - Spindles for ring-spinning and doubling machines - List of equivalent terms《纺织机械和附件 环锭纺纱机和并线机用锭子 同义术语表》.pdf

1、BRITISH STANDARD BS ISO 8114:1990 Implementation of ISO 8114:1990 Textile machinery and accessories Spindles for ring-spinning and doubling machines List of equivalent terms UDC 677.052.932.2:001.4BSISO 8114:1990 This British Standard, having been prepared under the directionof the Textiles and Clot

2、hing Standards Policy Committee, was published underthe authority of the Standards Board and comes intoeffect on 15 August 1993 BSI 02-2000 The following BSI references relate to the work on this standard: Committee reference TCM/33 Draft for comment 88/41538 DC ISBN 0 580 22462 7 Committees respons

3、ible for this British Standard The preparation of this British Standard was entrusted by the Textiles and Clothing Standards Policy Committee (TCM/-) to Technical Committee TCM/33, upon which the following bodies were represented: British Association of Clothing Machinery Manufacturers British Narro

4、w Fabrics Association British Paper and Board Industry Federation British Textile Machinery Association British Textile Technology Group Clothing and Footwear Institute Confederation of British Wool Textiles Limited Consumer Policy Committee of BSI Health and Safety Executive Knitting Industries Fed

5、eration Ltd. Textile Finishers Association Textile Institute Textile Research Council (HATRA) University of Manchester Institute of Science and Technology Amendments issued since publication Amd. No. Date CommentsBSISO 8114:1990 BSI 02-2000 i Contents Page Committees responsible Inside front cover N

6、ational foreword ii Foreword iii Text of ISO 8114 1BSISO 8114:1990 ii BSI 02-2000 National foreword This British Standard reproduces verbatim ISO 8114:1990 and implements it as the UK national standard. This British Standard is published under the direction of the Textiles and Clothing Standards Pol

7、icy Committee whose Technical Committee TCM/33 has the responsibility to: aid enquirers to understand the text; present to the responsible international committee any enquiries on interpretation, or proposals for change, and keep UK interests informed; monitor related international and European deve

8、lopments and promulgate them in the UK. NOTEInternational and European Standards, as well as overseas standards, are available from Customer Services, Publications, BSI, Linford Wood, Milton Keynes, MK14 6LE. A British Standard does not purport to include all the necessary provisions of a contract.

9、Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, theISO title page, pages ii to iv, pa

10、ges 1 to 3 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.ISO8114:1990 (E/F/R) ii BSI 02-2000 Contents Page Foreword iii Scope 1 Terminology 2 Figure 1 Ring spindl

11、e 2ISO8114:1990 (E/F/R) BSI 02-2000 iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member bo

12、dy interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrot

13、echnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with

14、 ISO procedures requiring at least 75 % approval by the member bodies voting. International Standard ISO 8114 was prepared by Technical Committee ISO/TC 72, Textile machinery and allied machinery and accessories.ISO8114:1990 (E/F/R) iv BSI 02-2000ISO8114:1990 (E/F/R) BSI 02-2000 1ISO8114:1990 (E/F/R

15、) 2 BSI 02-2000ISO 8114:1990 (E/F/R) BSI 02-2000 3BS ISO 8114:1990 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. I

16、t is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful

17、 if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called P

18、LUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standar

19、ds, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to E

20、xporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial d

21、iscounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardiz

22、ation bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude

23、 the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.