BS ISO 8118-2-2006 Textile machinery - Weaving machine temples - Full-width temples《纺织机械 织机边撑 开幅边撑》.pdf

1、BRITISH STANDARD BS ISO 8118-2:2006 Textile machinery Weaving machine temples Part 2: Full-width temples ICS 59.120.30 BS ISO 8118-2:2006 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 17 February 2006 BSI 17 February 2006 ISBN 0 580 47161 6

2、 National foreword This British Standard reproduces verbatim ISO 8118-2:2006 and implements it as the UK national standard. It supersedes BS ISO 8118:1986 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee TCI/33, Textile machinery, which has the respons

3、ibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI Catalogue under the section entitled “International St

4、andards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Stand

5、ard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European de

6、velopments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii and iii, a blank page, pages 1 to 3 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued.

7、 Amendments issued since publication Amd. No. Date Comments Reference number ISO 8118-2:2006(E)INTERNATIONAL STANDARD ISO 8118-2 First edition 2006-01-15 Textile machinery Weaving machine temples Part 2: Full-width temples Machines tisser Templets pour mtiers et machines tisser Partie 2: Templets de

8、 grande largeur BS ISO 8118-2:2006ii iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member b

9、ody interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electro

10、technical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted

11、by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent r

12、ights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 8118-2 was prepared by Technical Committee ISO/TC 72, Textile machinery and machinery for dry- cleaning and industrial laundering, Subcommittee SC 3, Machinery for fabric manufacturing including preparatory m

13、achinery and accessories. This first edition of ISO 8118-2, together with ISO 8118-1, cancels and replaces ISO 8118:1986, of which it constitutes a technical revision. ISO 8118 consists of the following parts, under the general title Textile machinery Weaving machine temples: Part 1: Temple cylinder

14、s Part 2: Full-width temples BS ISO 8118-2:2006blank 1 Textile machinery Weaving machine temples Part 2: Full-width temples 1 Scope This part of ISO 8118 defines the basic term and gives the nomenclature, technical specifications and designation for full-width weaving machine temples used in the tex

15、tile industry. 2 Terms and definitions For the purposes of this document, the following terms and definitions apply. 2.1 full-width temple device used in weaving to hold the cloth to the width as presented by the reed and which is positioned as near as possible to the fell of the cloth See Figure 1.

16、 BS ISO 8118-2:20062 3 Nomenclature Figure 1 identifies the parts and dimensions of a full-width temple. Dimensions in millimetres Key d 1rod diameter 1 ground profile l 1length of full-width temple 2 cover profile l 1 1 rod length 3 rod 4 sideplate 5 fixation screw NOTE For rod diameter values, see

17、 Table 1. Figure 1 Full-width temple Parts and dimensions 4 Specifications The specifications of the rod shall be in accordance with Table 1. Table 1 Specification of rod Dimensions in millimetres Material Rod diameter d 1Rod structure Length Rubber Brass Steel Synthetic 8 10 12 14 16 18 Smooth RH/L

18、H thread Rubber-coated Others l 1 1 BS ISO 8118-2:2006 3 5 Designation The designation of a full-width temple rod shall provide the following information, in the order given: a) “Rod to full-width temple”; b) reference to this part of ISO 8118 (i.e. “ISO 8118-2”); c) the rod diameter d 1 ; d) the ro

19、d length l 1 1 mm; e) structure of the material and surface of the rod (e.g. synthetic with R/L thread, synthetic smooth). EXAMPLE A full-width temple rod with a diameter of 10 mm and a length of l 1 1 mm = 1995 mm, made of synthetic material, and with a RH/LH thread: Rod to full-width temple ISO 81

20、18-2 10 1995 synthetic with RH/LH thread BS ISO 8118-2:2006BS ISO 8118-2:2006 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the interna

21、tional level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We

22、would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an

23、individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996

24、 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on stand

25、ards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information

26、 Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Te

27、l: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists

28、in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any mea

29、ns electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.