BS ISO 8262-3-2006 Milk products and milk-based foods - Determination of fat content by the Weibull-Berntrop gravimetric method (Reference method) - Special cases《乳制品和以乳为基.pdf

1、BRITISH STANDARD BS ISO 8262-3:2005 Milk products and milk-based foods Determination of fat content by the Weibull-Berntrop gravimetric method (Reference method) Part 3: Special casesICS 67.100.01 BS ISO 8262-3:2005 This British Standard was published under the authority of the Standards Policy and

2、Strategy Committee on 23 January 2006 BSI 23 January 2006 ISBN 0 580 47180 2 National foreword This British Standard reproduces verbatim ISO 8262-3:2005 and implements it as the UK national standard. It supersedes BS 7142-4:1989 which is withdrawn. The UK participation in its preparation was entrust

3、ed to Technical Committee AW/5, Chemical analysis of milk and milk products, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred

4、to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions

5、 of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or p

6、roposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii to vi, pages 1 to 9 and a back cover. The BSI copyri

7、ght notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments Reference numbers ISO 8262-3:2005(E) IDF 124-3:2005(E)INTERNATIONAL STANDARD ISO 8262-3 IDF 124-3 Second edition 2005-11-01 Milk products and milk-based foods

8、 Determination of fat content by the Weibull-Berntrop gravimetric method (Reference method) Part 3: Special cases Produits laitiers et produits base de lait Dtermination de la teneur en matire grasse par la mthode gravimtrique Weibull-Berntrop (Mthode de rfrence) Partie 3: Cas particuliers BS ISO 82

9、62-3:2005ii iii Contents Page Foreword iv Introduction . vi 1 Scope . 1 2 Terms and definitions. 1 3 Principle. 1 4 Reagents and materials . 2 5 Apparatus 2 6 Sampling 3 7 Procedure 3 7.1 Preparation of test sample. 3 7.2 Test portion . 4 7.3 Blank test. 4 7.4 Preparation of extraction flask 4 7.5 D

10、etermination 5 8 Calculation and expression of results 6 9 Precision 6 9.1 Interlaboratory test . 6 9.2 Repeatability 6 9.3 Reproducibility 7 10 Notes on procedure 7 10.1 Blank tests to check the solvent and filter papers 7 10.2 Blank test carried out simultaneously with the determination 8 11 Test

11、report . 8 Bibliography . 9 BS ISO 8262-3:2005iv Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each

12、member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International

13、 Electro technical Commission (IEC) on all matters of electro technical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standard

14、s adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject o

15、f patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 8262-3 IDF 124-3 was prepared by Technical Committee ISO/TC 34, Food products, Subcommittee SC 5, Milk and milk products, and the International Dairy Federation (IDF). It is being published jointly

16、by ISO and IDF. This edition of ISO 8262-3 IDF 124-3 cancels and replaces ISO 8262-3:1987, of which it constitutes a minor revision. ISO 8262 IDF 124 consists of the following parts, under the general title Milk products and milk-based foods Determination of fat content by the Weibull-Berntrop gravi

17、metric method (Reference method): Part 1: Infant foods Part 2: Edible ices and ice-mixes Part 3: Special cases BS ISO 8262-3:2005 v Foreword IDF (the International Dairy Federation) is a worldwide federation of the dairy sector with a National Committee in every member country. Every National Commit

18、tee has the right to be represented on the IDF Standing Committees carrying out the technical work. IDF collaborates with ISO in the development of standard methods of analysis and sampling for milk and milk products. Draft International Standards adopted by the Action Teams and Standing Committees

19、are circulated to the National Committees for voting. Publication as an International Standard requires approval by at least 50 % of the IDF National Committees casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. IDF s

20、hall not be held responsible for identifying any or all such patent rights. ISO 8262-3 IDF 124-3 was prepared by Technical Committee ISO/TC 34, Food products, Subcommittee SC 5, Milk and milk products, and the International Dairy Federation (IDF). It is being published jointly by IDF and ISO. All wo

21、rk was carried out by the Joint ISO-IDF Group of Experts on Fat determination (E 31), under the aegis of its chairman, Mr J. Eisses (NL). This edition of ISO 8262-3 IDF 124-3 cancels and replaces IDF 126A:1988, of which it constitutes a minor revision. ISO 8262 IDF 124 consists of the following part

22、s, under the general title Milk products and milk-based foods Determination of fat content by the Weibull-Berntrop gravimetric method (Reference method): Part 1: Infant foods Part 2: Edible ices and ice-mixes Part 3: Special cases BS ISO 8262-3:2005vi Introduction ISO 8262 IDF 124 has been prepared

23、within the framework of producing a series of reference methods, which are harmonized to the greatest possible extent, for the gravimetric determination of the fat content of milk, milk products and milk-based foods. These methods are based on the Rse-Gottlied (RG) method, or the Weibull-Berntrop (W

24、B) method, or the Schmid-Bondzynski-Ratzlaff (SBR) principle. For this part of ISO 8262 IDF 124, dealing with milk-based and with liquid, concentrated or dried milk products in poor condition and/or containing insoluble non-milk ingredients, a method based on the WB principle has been chosen for the

25、 following reasons: a) the RG procedure is not suitable when a distinct quantity of free fatty acids is present, or when the product contains lumps and/or non-milk ingredients insoluble in ammonia, since the extraction of fat is incomplete; b) the SBR procedure is not suitable owing to a considerabl

26、e lactose content, which gives rise to some ether-extractable compounds in the digestion with acid and thus gives too high values for the fat content; c) the WB procedure, although it also includes acid digestion, is not adversely affected by the ether- extractable compounds, since the acid digest i

27、s filtered and washed, and the dried residue on the filter does not contain compounds that are extractable by light petroleum; d) the method described is already used for this purpose in many countries. The original Weibull method was designed for bread; a considerably modified method, as specified

28、in this International Standard, was developed by Berntrop. This version has found wide application for the determination of fat in many types of food product. BS ISO 8262-3:20051 Milk products and milk-based foods Determination of fat content by the Weibull-Berntrop gravimetric method (Reference met

29、hod) Part 3: Special cases 1 Scope This part of ISO 8262 IDF 124 specifies the reference method for the determination of the fat content of milk- based and of liquid, concentrated or dried milk products to which the Rse-Gottllieb method is not applicable; i.e. those containing distinct quantities of

30、 free fatty acids or those which are not completely soluble in ammonia owing to the presence of lumps or non-milk ingredients, such as custards, porridges or certain milk- based products for bakery purposes. NOTE 1 Reference Rse-Gottlieb methods for the determination of the fat content of milk, of c

31、ream, of evaporated and sweetened condensed milk, and of dried milk products are specified in ISO 1211, ISO 2450, ISO 1737 and ISO 1736 respectively. The method is also applicable to fresh cheese types, such as cottage cheese and quarg, as well as to fresh cheeses with added fruit, syrup, “muesli”,

32、etc. for which the SBR method is not suitable owing to the higher carbohydrate contents and/or extreme inhomogeneity. NOTE 2 A reference Schmid-Bondzynski-Ratzlaff method for the determination of the fat content of cheese and processed cheese products having lactose contents below 5 % (mass fraction

33、) of the non-fat solids is specified in ISO 1735. 2 Terms and definitions For the purposes of this document, the following terms and definitions apply. 2.1 fat content all the substances determined by the method specified in this part of ISO 8262 IDF 124 NOTE It is expressed as a mass fraction in pe

34、rcent. 3 Principle A test portion is digested by boiling with dilute hydrochloric acid. The hot digest is filtered through a wetted filter paper to retain fatty substances, then the fat is extracted from the dried filter paper using n-hexane or light petroleum. The solvent is removed by distillation

35、 or evaporation and the substances are extracted and weighed. (This is usually known as the Weibull-Berntrop principle.) BS ISO 8262-3:20052 4 Reagents and materials Use only reagents of recognized analytical grade that leave no appreciable residue when the determination is carried out by the method

36、 specified. Use distilled or deionized water, or water of at least equivalent purity. 4.1 Dilute hydrochloric acid, containing approximately 20 % (mass fraction) of HCl, 20approximately 1,10 g/ml. Dilute 100 ml of concentrated hydrochloric acid ( 20= 1,18 g/ml) with 100 ml of water and mix. 4.2 Extr

37、action solvent, free from water: n-hexane or light petroleum having any boiling range between 30 C and 60 C. To test the quality of the extraction solvent, distil 100 ml of it from an extraction flask (5.4) prepared as specified in 7.4. Use an empty extraction flask, prepared in the same way, to che

38、ck the mass (see 10.1). The solvent shall leave no residue greater than 1,0 mg. Replace or distil the solvent if it does not meet this requirement. 4.3 Filter papers, of diameter 150 mm, pleated, medium grade, preferably defatted. To test the quality of the filter paper, carry out a blank test as sp

39、ecified in 7.3, using a solvent satisfying the requirement of 4.2. Use an empty extraction flask (5.4), prepared as specified in 7.4, to check the mass (see 10.1). The paper shall leave no residue greater than 2,5 mg. Replace unsatisfactory filter papers. 4.4 Blue litmus paper. 4.5 Diatomaceous eart

40、h (optional; see 7.5.3). 4.6 Pure lactose (optional; see 7.5.3). 4.7 Cotton wool, defatted by extraction with the solvent (4.2) for 1,5 h and dried. 5 Apparatus WARNING Since the determination involves the use of volatile flammable solvents, electrical apparatus employed may be required to comply wi

41、th legislation relating to the hazards in using such solvents. Usual laboratory equipment and, in particular, the following. 5.1 Analytical balance. 5.2 Blender, for homogenizing the laboratory sample, if necessary. For example, use a food chopper or a high-speed blender with a blender jar, of capac

42、ity 1 litre, fitted with a lid. 5.3 Extraction apparatus, continuous or semi-continuous. For example, use a Soxhlet type, consisting of an extraction flask (flat-bottomed, short-necked) of capacity 150 ml, an extractor with a siphoning volume of 40 ml to 60 ml, and an efficient reflux condenser fitt

43、ed with a drying tube or plug of cotton wool. 5.4 Extraction flasks, of capacity 150 ml, flat-bottomed and short-necked. 5.5 Extraction thimbles, made of defatted filter paper, glass, alumina or polytetrafluoroethylene (PTFE), contributing no appreciable residue in the blank test, or made of cellulo

44、se, single thickness, of internal diameter 22 mm and external length 80 mm, for use with the extraction apparatus (5.3). BS ISO 8262-3:2005 3 5.6 Water baths, capable of being maintained at the following temperatures: 40 C to 60 C (see 7.1.1); 30 C to 40 C (see 7.1.2). 5.7 Heating apparatus, for the

45、 extraction apparatus. For example, use a water bath, sand bath or a thermostatically controlled hotplate. 5.8 Boiling aids, fat-free, such as glass beads or pieces of non-friable, non-porous porcelain or silicon carbide. 5.9 Conical flask, of capacity 250 ml, fitted with a reflux condenser, prefera

46、bly of the Liebig type. 5.10 Heating apparatus, for heating a conical flask fitted with a condenser. For example, use a wire gauze and gas burner, an electric hotplate or a sand bath. 5.11 Filter funnel, suitable for use with the pleated filter paper (4.3). 5.12 Beakers with spouts, of capacities 10

47、0 ml and 250 ml. 5.13 Distillation apparatus, to enable the solvent to be gently distilled from the flasks at a temperature not exceeding 100 C. 5.14 Drying oven, electrically heated, with ventilation port(s) fully open, capable of being maintained at a temperature of 102 C 2 C throughout the workin

48、g space. The oven shall be fitted with a suitable thermometer. 5.15 Measuring cylinders, of capacities 50 ml, 100 ml and 250 ml. 5.16 Tongs, made of metal, suitable for holding flasks or beakers. 5.17 Tweezers, flat-tipped, for holding filter papers and thimbles. 6 Sampling A representative sample s

49、hould have been sent to the laboratory. It should not have been damaged or changed during transport or storage. Sampling is not part of the method specified in this part of ISO 8262 IDF 124. A recommended sampling method is given in ISO 707 IDF 50. All liquid, viscous or pasty laboratory samples shall be kept at a temperature of 2 C to 4 C from the time of sampling to the time of commencing the procedure. In the case of