1、BRITISH STANDARD BS ISO 8323:1985 Implementation of ISO8323:1985 Freight containers Air/surface (intermodel) general purpose containers Specification and tests UDC 621.869.88BSISO8323:1985 This BritishStandard, having been prepared under the directionof the Consumer Products and Services SectorBoard
2、, was published underthe authority of the Standards Board and comesintoeffect on 15July1995 BSI 12-1999 The following BSI references relate to the work on this standard: Committee reference PKM/18 Draft for comment 84/36647 DC ISBN 0 580 24374 5 Committees responsible for this BritishStandard The pr
3、eparation of this BritishStandard was entrusted to Technical Committee PKM/18, Freight containers, upon which the following bodies were represented: British Industrial Truck Association British International Freight Association British Railways Board Chamber of Shipping Department of Transport (Tran
4、sport Industries) European Portable Tank Association (British Section) Federation of the Electronics Industry Health and Safety Executive Institute of Logistics Lloyds Register of Shipping Ports Safety Organisation Road Haulage Association Ltd. Shipowners Refrigerated Cargo Research Association Soci
5、ety of Motor Manufacturers and Traders Limited Amendments issued since publication Amd. No. Date CommentsBSISO8323:1985 BSI 12-1999 i Contents Page Committees responsible Inside front cover National foreword ii Foreword iv Text of ISO8323 1BSISO8323:1985 ii BSI 12-1999 National foreword This British
6、Standard reproduces verbatim ISO8323:1985 and implements it as the UK national standard. This BritishStandard is published under the direction of the Consumer Products and Services Sector Board whose Technical Committee PKM/18 has the responsibility to: aid enquirers to understand the text; present
7、to the responsible international committee any enquiries on interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. NOTEInternational and European Standards, as well as overseas standards, are ava
8、ilable from Customer Services, BSI,389Chiswick High Road, London W44AL. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer im
9、munity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, theISO title page, pages ii to iv, pages1 to40 and abackcover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indica
10、ted in the amendment table on the inside front cover.ISO8323:1985(E) ii BSI 12-1999 Contents Page Foreword iv 0 Introduction 1 0.1 General 1 0.2 Definition of container type 1 1 Scope and field of application 1 2 References 1 3 General characteristics 1 3.1 Airworthiness 1 3.2 Tare weight 1 3.3 Cust
11、oms sealing 1 4 Dimensions and ratings 2 4.1 External dimensions 2 4.2 Minimal internal dimensions 2 4.3 Ratings 2 4.4 Maximum gross weight, R a , and distributed load for air/surface (intermodal) containers 2 4.5 Centre of gravity 3 5 Basic design requirements 3 5.1 General 3 5.2 Aircraft restraint
12、 loads 5 5.3 Container assembly 5 5.4 Container base 5 5.5 Closures and doors 6 5.6 Optional features 6 6 Testing 7 6.1 General 7 6.2 Test No.1 Stacking 7 6.3 Test No.2 Lifting from the four top corner fittings 8 6.4 Test No.3 Lifting from the four bottom corner fittings 8 6.5 Test No.4 Longitudinal
13、 restraint 8 6.6 Tests No.5 Strength of end wall/door 9 6.7 Tests No.6 Strength of side walls 9 6.8 Tests No.7 Roof strength 10 6.9 Tests No.8 Floor strength 11 6.10 Test No.9 Lifting from fork-lift pockets 11 6.11 Test No.10 Weatherproofness 12 6.12 Test No.11 Bridging and cresting 12 6.13 Test No.
14、12 Base restraint on roller bed vehicles 12 Annex A Detailed design requirements 30 Annex B.1 Overall external dimensions and tolerances ISO668 31 Annex B.2 Top corner fittings ISO1161 34 Annex B.3 Marking requirements ISO6346 37 Annex B.4 Ultimate load criteria ISO8097 40 Figure 1 Symbol to denote
15、an air/surface (intermodal) container 13 Figure 2 Location of side restraint slots 14 Figure 3 Side slot detail 15 Figure 4 Side latch dimensions Forward, aft, upward and side loads 16 Figure 5 End restraint locations 17 Figure 6 End latch dimension 18 Figure 7 End slots 19ISO8323:1985(E) BSI 12-199
16、9 iii Page Figure 8 Optional provisions for handling1C and1D containers by means of fork-lift trucks 20 Figure 9 Location of bottom corner fitting 21 Figure 10a) Bottom corner fitting Dimensions in millimetres 22 Figure 10b) Bottom corner fitting Dimensions in inches 23 Figure 11a) Diagrammatic repr
17、esentation of tests Nos.1,2,3 and4 24 Figure 11b) Diagrammatic representation of tests Nos.5.1,5.2,5.3 and6.1 25 Figure 11c) Diagrammatic representation of tests Nos.6.2,6.3,7.1 and7.2 26 Figure 11d) Diagrammatic representation of tests Nos.7.3,8.1,8.2 and9 27 Figure 11e) Diagrammatic representation
18、 of tests Nos.10 and11 28 Figure 11f) Diagrammatic representation of test No.12 29 Figure 12 Details of requirements for load-transferring areas in base structures of containers 31 Figure 13 Corner fittings 33 Figure 14a) Top corner fitting Dimensions in millimetres 35 Figure 14b) Top corner fitting
19、 Dimensions in inches 36 Figure 15 Location of mandatory marks 38 Table 1 Minimum internal dimensions 2 Table 2a) Maximum gross weight of container, R a 3 Table 2b) Maximum gross weight of container, R s 3 Table 3 Stacking 4 Table 4 Corner fitting test load 7 Table 5 Total number of restraint latche
20、s 10 Table 6 Nominal lengths 31 Table 7 External dimensions and permissible tolerances 32 Table 8 Dimensions and tolerances relating to corner fitting locations 32 Table 9 Ultimate load criteria 40ISO8323:1985(E) iv BSI 12-1999 Foreword ISO (the International Organization for Standardization) is a w
21、orldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented
22、on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by
23、 the ISO Council. They are approved in accordance with ISOprocedures requiring at least75% approval by the member bodies voting. International Standard ISO8323 was prepared jointly by Technical Committees ISO/TC104, Freight containers, and ISO/TC20, Aircraft and space vehicles. Itreplaces ISO1496-7:
24、1974, withdrawn in1984.ISO8323:1985(E) BSI 12-1999 1 0 Introduction 0.1 General The basic requirements for the air/surface (intermodal) container are presented in clauses1 to6, while the detailed design requirements are laid down in Annex A. Annex B sets out the sections of other International Stand
25、ards which apply to the air/surface container. ISO4128 presents the requirements for air mode general purpose containers. Requirements for containers to be transported by rotary-wing aircraft are excluded from these International Standards. When required, an International Standard will be developed
26、for this type of container. NOTEThe essential basic and detail criteria are identified by use of the key word “shall”. Recommended basic and detail criteria are identified by use of the key word “should”, and, while not mandatory, are considered to be of primary importance in providing serviceable,
27、economical and practical air/surface containers. 0.2 Definition of container type air/surface (intermodal) container an article of transport equipment having an internal volume of1m 3or more, fitted with top and bottom corner fittings, with restraint provisions compatible with an aircraft restraint
28、system, and an entirely flush base bottom to allow handling on rollerized cargo handling systems the container is primarily intended for transport by air and interchange with surface transport modes (road, rail and sea) 1 Scope and field of application 1.1 This International Standard sets out the ba
29、sic requirements for the specification and testing of air/surface (intermodal) containers for general cargo, which are suitable for international exchange and for conveyance by road, rail and sea as well as by freighter versions of high capacity fixed-wing aircraft, including interchange between the
30、se modes of transport. 1.2 The coding, identification and marking of these containers shall be in accordance with ISO6346. Todenote the container as an air/surface (intermodal) container, the symbol illustrated in Figure 1 shall be located at the top left-hand corner of the end walls and side walls
31、and, as appropriate, on the roof, complying with the requirements of ISO6346 (seeAnnex B.3 of this International Standard). NOTEIf any other markings are used on the container, they shall in no way interfere with the location of the marks required by ISO6346. 1.3 The container types covered by this
32、International Standard are: 2 References ISO668, Series1 freight containers Classification, external dimensions and ratings. ISO1161, Series1 freight containers Corner fittings Specification. ISO1496-1, Series1 freight containers Specification and testing Part1: General cargo containers for general
33、purposes. ISO3874, Series1 freight containers Handling and securing. ISO4116, Ground equipment requirements for compatible with aircraft unit load devices. ISO4128, Aircraft Air mode modular containers. ISO6346, Freight containers Coding, identification and marking. ISO8097, Aircraft Minimum airwort
34、hiness requirements and test conditions for certified air cargo unit load devices 1) . 3 General characteristics 3.1 Airworthiness Airworthiness requirements laid down by the applicable authorities shall be recognized for container design features such as ultimate loads (see5.2.1), rapid decompressi
35、on (see5.3.2), fire protection and markings. For this purpose, ISO8097 shall be applied. 3.2 Tare weight Taking into consideration the unique aircraft requirements, container design should utilize the combination of design and material which results in as low a tare weight as possible. 3.3 Customs s
36、ealing Since air/surface (intermodal) containers are expected to travel mostly on international routes under customs control, container design shall meet the appropriate requirements of the following international conventions: a) UN/IMO: (International Maritime Organization) Customs convention on co
37、ntainers, Geneva,1972-12-02. Type Marking code identification Air/surface intermodal (general cargo) 90 to99: Fixed wing 1) At present at the stage of draft (de facto NAS3610).ISO8323:1985(E) 2 BSI 12-1999 b) UN/ECE (Economic Commission for Europe): Customs convention on the international transport
38、of goods under cover of TIR carnets (TIRConvention), Geneva,1975-11-14. The requirements affecting container design appear in Annex4 of the convention quoted in a) and in Annex2 of the convention quoted in b), Regulations on technical conditions applicable to containers which may be accepted for int
39、ernational transport under customs seal. The main items to be taken into consideration for container design appear in clauseA.5 of Annex A of this International Standard. In accordance with Annex5 of the convention quoted in a) and with Annex3 of the convention quoted inb), an approval certificate s
40、hould be issued by a competent national authority, and an approval plate as specified minimum dimensions200mm 100mm (8in 4in) should be affixed accordingly in the vicinity of the lower edge of the container door. 4 Dimensions and ratings 4.1 External dimensions The overall external dimensions and to
41、lerances of the containers, covered by this International Standard, are those established for series1A,1B,1C and1D freight containers in ISO668 (seeAnnex B.1 of this International Standard). Nopart of the container shall project beyond these specified overall external dimensions. 4.2 Minimum interna
42、l dimensions Internal dimensions of containers shall be as large as possible, but at least equal to those values given in Table 1. The dimensions apply when measured at a temperature of20C(68 F). Measurements taken at other temperatures shall be adjusted accordingly. Where a corner fitting projects
43、into the internal space, as specified by Table 1, that part of the corner fitting projecting into the container shall not be considered as reducing the size of the container. 4.2.1 Door opening The container shall be designed to make the maximum possible internal cross-section available for loading.
44、 Each container shall be provided with a door opening at least at one end. Door openings shall be as large as possible, but not less than: minimum door height:2134mm(84in) minimum door width:2286mm(90in) 4.3 Ratings For the ratings of containers suitable for air and surface transport, the following
45、definitions apply. 4.3.1 maximum gross weight 2)the maximum allowable combined weight of the container and its cargo: R a : maximum gross weight of an air/surface container R s : maximum gross weight of a surface container (stacking only) 4.3.2 tare weight 2) , T the weight of the empty container, i
46、ncluding its normal complement of loading restraint devices 4.4 Maximum gross weight, R a 2) , and distributed load for air/surface (intermodal) containers The container shall not be used, in any transport system, at gross weights in excess of those given inTable 2a). Table 1 Minimum internal dimens
47、ions 2) The term “weight” is retained here, instead of the correct technical term “mass”, in order to conform to current commercialusage. Freight container designation Minimum height Minimum width Minimum length mm in mm ft in 1A 1B 1C 1D 2197mm (7ft2 1/2 in) 2330 913/4 11998 8931 5867 2802 39 29 19
48、 9 4 3/8 35/8 3 25/16ISO8323:1985(E) BSI 12-1999 3 Table 2a) Maximum gross weight of container, R a However, a uniformly distributed load up to6759kg(14900lb) may be placed in any3m(10ft) linear length for1A,1B and1C containers. 4.5 Centre of gravity Cargo placement shall limit the centre of gravity
49、 to within the envelope indicated below: a) 10% of the external width, measured from the geometric centre; b) 5% of the external length, measured from the geometric centre; c) between a height of356mm(14in) to1219mm(48in), measured from the bottom of the base. To obtain the above asymmetric conditions, cargo density is assumed to vary linearly. 5 Basic design requirements 3) 5.1 General All containers shall be weatherproof. Co
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1