1、BRITISH STANDARD BS ISO 9057:1991 Incorporating Implementation of ISO 9057:1991 Glass containers 28 mm tamper-evident finish for pressurized liquids Dimensions ICS 55.100 August 1997 and April 2006 corrigendaBS ISO 9057:1991 This British Standard was published under the authority of the Standards Bo
2、ard and comes into effect on 15 August 1995 BSI 2009 ISBN 978 0 580 67448 8 Amendments/corrigenda issued since publication Amd. No. Date Comments 9499 August 1997 Text added to the National Foreword Foreword This British Standard is the UK implementation of ISO 9057:1991, incorporating corrigendum A
3、pril 2006. It should be noted that while the general finish profiles are similar to those widely used in the UK and Europe there are some differences in dimensional detail. The UK participation in its preparation was entrusted to Technical Committee PKM/6, Glass packaging. A list of organizations re
4、presented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. 31 Ju
5、ly 2009 Implementation of ISO corrigendum April 2006. The first equation in Footnote 1, Figure 1,is replacedO 9 0 5 7 : 1 9 9 1 ( E ) ii BSI 2009 Contents Page Foreword iii 1 Scope 1 2 Normative reference 1 3 Definitions 1 4 Dimensions 1 Figure 1 2 BS ISO 9 0 5 7 : 1 9 9 1 ( E ) BSI 2009 iii Forewor
6、d ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technica
7、l committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of ele
8、ctrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75% of the member bodies casting a vote. International Standard ISO 9057 was prepare
9、d by Technical Committee ISO/TC 63, Glass containers, Sub-Committee SC 3, Dimensions. BS ISblankO 9 0 5 7 : 1 9 9 1 ( E ) BSI 2009 1 1 Scope This International Standard specifies the dimensions of the 28 mm tamper-evident finish of glass containers for pressurized liquids. 2 Normative reference The
10、following standard contains provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the edition indicated was valid. All standards are subject to revision, and parties to agreements based on this International Standard are e
11、ncouraged to investigate the possibility of applying the most recent edition of the standard indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO 7348:1991, Glass containers Manufacture Vocabulary. 3 Definitions For the purposes of this Internati
12、onal Standard, the definitions given in ISO 7348 apply, with the following exception. 3.1 tamper-evident finish finish designed to take a tamper-evident closure which needs to be snapped before it can be opened 4 Dimensions The dimensions shall be in accordance with Figure 1. All untoleranced dimens
13、ions are nominal. The glass thickness throughout the full depth of the finish shall be adequate to withstand normal handling. The finish shall be free from cracks likely to have an adverse effect on sealing performance. BS ISO 9 0 5 7 : 1 9 9 1 ( E ) 2 BSI 2009 BS ISblankBSI Group Headquarters 389 C
14、hiswick High Road, London, W4 4AL, UK Tel +44 (0)20 8996 9001 Fax +44 (0)20 8996 7001 standards BSI - British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is
15、incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if
16、 anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating
17、service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001 Email: You ma
18、y also buy directly using a debit/credit card from the BSI Shop on the Website http:/ In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI
19、provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact Information Centre. Tel:
20、 +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002 F
21、ax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via British Standards Online can be found at http:/ Further information about BSI is available on the BSI website at http:/ . Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, i
22、n the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise with
23、out prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright and Licensing Manager. Tel: +44 (0)20 8996 7070 Email: BS ISO 9057:1991
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1