BS ISO 9449-2007 Tools for moulding - Centring sleeves《模制工具 定心套》.pdf

1、BRITISH STANDARD BS ISO 9449:2007 Tools for moulding Centring sleeves ICS 25.120.30 BS ISO 9449:2007 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2007 BSI 2007 ISBN 978 0 580 50190 6 National foreword This British Standard was

2、published by BSI. It is the UK implementation of ISO 9449:2007. It supersedes BS 7564-2:1992 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee MTE/12, Tools for pressing and moulding. A list of organizations represented on MTE/12 can be obtained on requ

3、est to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. Date Commen

4、ts Reference number ISO 9449:2007(E)INTERNATIONAL STANDARD ISO 9449 Second edition 2007-02-01 Tools for moulding Centring sleeves Outillage de moulage Douilles de centrage BS ISO 9449:2007ii iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national s

5、tandards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International

6、organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules gi

7、ven in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least

8、 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 9449 was prepared by Technical Committee ISO/TC 29, Sm

9、all tools, Subcommittee SC 8, Tools for pressing and moulding. This second edition cancels and replaces the first edition (ISO 9449:1990), of which it constitutes a minor revision. In particular, the indication of surface textures has been updated in accordance with ISO 1302:2002. BS ISO 9449:2007bl

10、ank1 Tools for moulding Centring sleeves 1 Scope This International Standard specifies the dimensions and tolerances, in millimetres, for centring sleeves intended to be used for locating the spacing blocks in relation to the fixed clamp plates in moulds. It gives indications concerning materials an

11、d hardness, and specifies the designation of centring sleeves which meet the requirements of this International Standard. 2 Dimensions The dimensions of centring sleeves shall conform to the indications of Figure 1 and Table 1. 3 Material and corresponding hardness The material and corresponding har

12、dness are left to the manufacturers discretion. 4 Designation A centring sleeves in accordance with this International Standard shall be designated by: a) “centring sleeve”; b) a reference to this International Standard, i.e. ISO 9449; c) its internal diameter, d; d) its length, l. EXAMPLE The desig

13、nation for a centring sleeve of internal diameter d = 12 mm and length l = 20 mm is as follows: Centring sleeve ISO 9449 - 12 20 BS ISO 9449:20072 Surface roughness values in micrometres NOTE The centring sleeves are intended to fit in bores having a tolerance H7. aThe design of the rear part, for e

14、xtraction purposes, is left to the manufacturers discretion. Figure 1 Centring sleeves Table 1 Dimensions of centring sleeves d 5 1 5 0 , , + +12 16 20 25 32 40 50 D 1 al 0 1 18 22 28 32 40 50 63 20 25 32 40 50 (56) 63 (71) 80 (90) 100 112 125 (140) 160 (180) 200 NOTE Values show in parentheses are

15、to be avoided. aSee Figure 1 for tolerances. BS ISO 9449:20073 Bibliography 1 ISO 1302:2002, Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation BS ISO 9449:2007BS ISO 9449:2007 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Insti

16、tution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards sh

17、ould make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical commi

18、ttee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Or

19、ders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards,

20、it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Expo

21、rters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards develo

22、pments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Stan

23、dards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permi

24、tted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course

25、of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.