BS ISO 9762-2001 Aircraft control wire rope assemblies - Dimensions and end-fitting combinations《航空器操纵钢丝绳组件 尺寸规格及端部配件组合》.pdf

1、BRITISH STANDARD AEROSPACE SERIES BS ISO 9762:2000 Aircraft control wire rope assemblies Dimensions and end-fitting combinations ICS 49.035 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBS ISO 9762:2000 This British Standard, having been prepared under the direction of the En

2、gineering Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 March 2001 BSI 03-2001 ISBN 0 580 35033 9 National foreword This British Standard reproduces verbatim ISO 9762:2000 and implements it as the UK national standard. The UK participation

3、 in its preparation was entrusted to Technical Committee ACE/14, Aerospace details and parts, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or Eu

4、ropean publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the ne

5、cessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee

6、any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii and iii

7、, a blank page, pages 1 to 4, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsA Referencenumbe r ISO9762:2000 (E) INTERNATIONAL STANDARD ISO 9762 Firstediti

8、on 20001215 AerospaceAircraftcontrolwirerope assembliesDimensionsandendfitting combinations AronautiqueetespaceCblesdecommandedaronefs,quips DimensionsetcombinaisondesemboutsISO9762:2000(E) iiISO9762:2000(E) iii Foreword ISO(theInternationalOrganizationforStandardization)isaworldwidefederationofnati

9、onalstandardsbodies(ISO memberbodies).TheworkofpreparingInternationalStandardsisnormallycarriedoutthroughISOtechnical committees.Eachmemberbodyinterestedinasubjectforwhichatechnicalcommitteehasbeenestablishedhas therighttoberepresentedonthatcommittee.Internationalorganizations,governmentalandnongove

10、rnmental,in liaisonwithISO,alsotakepartinthework.ISOcollaboratescloselywiththeInternationalElectrotechnical Commission(IEC)onallmattersofelectrotechnicalstandardization. InternationalStandardsaredraftedinaccordancewiththerulesgivenintheISO/IECDirectives,Part3. DraftInternationalStandardsadoptedbythe

11、technicalcommitteesarecirculatedtothememberbodiesforvoting. PublicationasanInternationalStandardrequiresapprovalbyatleast75%ofthememberbodiescastingavote. InternationalStandardISO9762waspreparedbyTechnicalCommitteeISO/TC20, Aircraftandspacevehicles, SubcommitteeSC12, Mechanicalsystemparts .INTERNATI

12、ONALSTANDARD OISO9762:2000(E) 1 AerospaceAircraftcontrolwireropeassembliesDimensions andendfittingcombinations 1Scope ThisInternationalStandardspecifiesthepossiblecombinationsandlengthsofpreformedflexiblesteelwireropes foraircraftcontrolsequippedwithtwoendfittingsswagedoneachendofthecableandthecorre

13、sponding designations. 2Normative references Thefollowingnormativedocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsofthis InternationalStandard.Fordatedreferences,subsequentamendmentsto,orrevisionsof,anyofthesepublicationsdo notapply.However,partiestoagreementsbasedonth

14、isInternationalStandardareencouragedtoinvestigatethe possibilityofapplyingthemostrecenteditionsofthenormativedocumentsindicatedbelow.Forundatedreferences, thelatesteditionofthenormativedocumentreferredtoapplies.MembersofISOandIECmaintainregistersof currentlyvalidInternationalStandards. ISO20201:1997

15、, Aerospace Preformedflexiblesteelwireropeforaircraftcontrols Part 1:Dimensionsand loads. ISO9737:2000,AerospaceEyeends,incorrosionresistantsteel,swagedonaircraftcontrolwirerope Dimensionsandloads. ISO9748:2000,AerospaceBallends,incorrosionresistantsteel,swagedonaircraftcontrolwirerope Dimensionsand

16、loads. ISO9749:2000,AerospaceStudends,incorrosionresistantsteel,swagedonaircraftcontrolwirerope Dimensionsandloads. ISO9759:2000,AerospaceForkends,incorrosionresistantsteel,swagedonaircraftcontrolwirerope Dimensionsandloads. ISO9760:2000,AerospaceForkends,incorrosionresistantsteel,swagedonaircraftco

17、ntrolwirerope,for rollingbearingsDimensionsandloads. ISO9763:1999, AerospaceAircraftcontrolwireropeassembliesTechnicalspecifications. 3Dimensions 3.1Endfittings EndfittingsshallbeinaccordancewiththeInternationalStandardsgiveninTable1. 3.2 Nakedwirerope NakedwireropeshallbeinaccordancewithISO20201.IS

18、O9762:2000(E) 2 3.3Wire rope 3.3.1Nominal lengthL s Thenominallength L s isdefinedinTable1andislefttothecustomer. 3.3.2 Limitdeviationsonnominallength L s Thelimitdeviationsonnominallength L s arespecifiedinTable2. Table1WireropeendfittingcombinationcodesISO9762:2000(E) 3 Table2Limitdeviationsonnomi

19、nallength L s L s m Limitdeviations mm L s 1 2 1 ,L s 6 3 6 ,L s 12 5 12 ,L s 18 7 18 ,L s 27 10 L s .27 13 4 Materialandsurfacetreatment 4.1Endfittings ThematerialandsurfacetreatmentofendfittingsshallbeinaccordancewithproductstandardscitedinTable1. 4.2 Nakedwirerope Thematerialandsurfacetreatmentof

20、nakedwireropeshallbeinaccordancewithISO20201. 5 Correspondingcombinationsandcodes 5.1 Wireropeendfittings CombinationcodesforwireropeendfittingsaregiveninTable1. 5.2 Nominaldiametersaccordingtowireropematerial CodesforwireropenominaldiametersbymaterialaregiveninTable3. 6Designation Eachcontrolwirero

21、peassemblyinaccordancewiththisInternationalStandardshallbedesignatedasshowninthe followingexample. EXAMPLEISO9762:2000(E) 4 Table3Codesforwireropenominaldiametersbymaterial Nominal diameterofwire rope Construction Codes mm Carbonsteel wirerope a Stainlesssteel wirerope a 1,6 7 7 AP 2,4 BQ CR 3,2 D S

22、 4,0 7 19 ET 4,8 F U 5,6 G V 6,4 H W a InaccordancewithISO20201. 7Technical specification InaccordancewithISO9763.BS ISO 9762:2000 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents

23、the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to

24、improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. F

25、ax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:

26、 020 8996 9001. Fax: 020 8996 7001. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Informatio

27、n on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the I

28、nformation Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. F

29、ax: 020 8996 7001. Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright,

30、 Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the stand

31、ard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.