BS ISO 9903-1-2003 Textile machinery and accessories - Main dimensions for section wires for metallic card clothing - Foot without interlocking or interchaining《纺织机械和附件 梳理.pdf

1、BRITISH STANDARD BS ISO 9903-1:2003 Textile machinery and accessories Main dimensions for section wires for metallic card clothing Part 1: Foot without interlocking or interchaining ICS 59.120.10 BS ISO 9903-1:2003 This British Standard was published under the authority of the Standards Policy and S

2、trategy Committee on 21 March 2003 BSI 21 March 2003 ISBN 0 580 41443 4 National foreword This British Standard reproduces verbatim ISO 9903-1:2003 and implements it as the UK national standard. This standard, together with BS ISO 9903-2:2003, supersedes BS ISO 9903:1991 which is withdrawn. The UK p

3、articipation in its preparation was entrusted to Technical Committee TCI/33, Textile machinery, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international pub

4、lications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the n

5、ecessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the i

6、nterpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii and iii, a blank page, pages

7、1 to 3 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments Reference number ISO 9903-1:2003(E)INTERNATIONAL STANDARD ISO 9903-1 First edition 2003-02-15 Textile machinery and acces

8、sories Main dimensions for section wires for metallic card clothing Part 1: Foot without interlocking or interchaining Matriel pour lindustrie textile Dimensions principales des fils pour garnitures de carde Partie 1: Profil sans talon autobloquant, ni enchan BSISO99031:2003BSISO99031:2003iiIS-3099

9、O1:(3002E) I SO 3002 All irhgts seredevr iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each membe

10、r body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Elec

11、trotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopt

12、ed by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of paten

13、t rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 9903-1 was prepared by Technical Committee ISO/TC 72, Textile machinery and machinery for dry- cleaning and industrial laundering, Subcommittee SC 1, Spinning preparatory, spinning, twisting and winding ma

14、chinery and accessories. This first edition, together with the first edition of ISO 9903-2, cancels and replaces ISO 9903:1991, which has been technically revised. ISO 9903 consists of the following parts, under the general title Textile machinery and accessories Main dimensions for section wires fo

15、r metallic card clothing: Part 1: Foot without interlocking or interchaining Part 2: Foot with interchaining BSISO99031:2003iiiINTENRATIONAL TSANDADR IS-3099 O1:(3002E)I SO 3002 All irhgts seredevr 1Textile machinery and accessories Main dimensions for section wires for metallic card clothing Part 1

16、: Foot without interlocking or interchaining 1 Scope This part of ISO 9903 specifies the main dimensions for section wires for metallic card clothing with foot without interlocking or interchaining. 2 Normative references The following referenced documents are indispensable for the application of th

17、is document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 5234, Textile machinery and accessories Metallic card clothing Terms and definitions 3 Terms, definitions and symbols For t

18、he purposes of this document, the terms and definitions and the symbols given in ISO 5234 apply. 4 Dimensions Dimensions shall be in accordance with Figure 1 and Table 1. Figure 1 Section wire Type A BSISO99031:20031IS-3099 O1:(3002E) 2 I SO 3002 All irhgts seredevrTable 1 Main dimensions Dimensions

19、 in millimetres b 10 0,02 h 1h 20,5 0,6 2 0,02 1,3 0,5 0,6 0,7 2,5 0,02 1,3 0,6 0,7 0,8 0,9 2,8 0,02 1,3 0,8 0,9 1,0 1,2 3,2 0,02 1,3 0,8 0,9 1,0 1,2 1,4 1,6 4 0,02 1,3 1,0 1,2 1,4 1,6 1,8 2,0 2,5 5 0,03 1,5 1,0 1,1 1,2 1,3 1,4 1,5 1,6 1,7 1,8 2,0 2,5 5,5 0,04 1,5 BSISO99031:20032IS-3099 O1:(3002E)

20、I SO 3002 All irhgts seredevr 35 Designation The designation of a section wire with foot without interlocking or interchaining, Type A, shall include the following information in the order given: a) “Section wire”; b) reference to this part of ISO 9903 (i.e. ISO 9903-1); c) the type of section wire

21、(Type A); d) the dimension b 1 , in millimetres; e) the dimension h 1 , in millimetres. EXAMPLE A section wire, Type A, of rib width b 1= 0,9 mm and total height of wire h 1= 3,2 mm is designated as follows: Section wire ISO 9903-1 A 0,9 3,2 BSISO99031:20033BS ISO 9903-1:2003 BSI 389 Chiswick High R

22、oad London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendme

23、nt or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard woul

24、d inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the late

25、st editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In res

26、ponse to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards throu

27、gh its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of

28、BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online

29、 access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the internat

30、ional standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This d

31、oes not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.