BS ISO IEC 11694-5-2014 Identification cards Optical memory cards Linear recording method Data format for information interchange for applications using ISO IEC 11694-4《识别.pdf

1、BSI Standards Publication BS ISO/IEC 11694-5:2014 Identification cards Optical memory cards Linear recording method Part 5: Data format for information interchange for applications using ISO/IEC 11694-4BS ISO/IEC 11694-5:2014 BRITISH STANDARD National foreword This British Standard is the UK impleme

2、ntation of ISO/IEC 11694-5:2014. It supersedes BS ISO/IEC 11694-5:2006 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee IST/17, Cards and personal identification. A list of organizations represented on this committee can be obtained on request to its s

3、ecretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014. Published by BSI Standards Limited 2014 ISBN 978 0 580 78150 6 ICS 35.240.15 Compliance with a British Standar

4、d cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2014. Amendments/corrigenda issued since publication Date T e x t a f f e c t e dIdentification cards Optical memory cards Linear rec

5、ording method Part 5: Data format for information interchange for applications using ISO/IEC 11694-4 Cartes didentification Cartes mmoire optique Mthode denregistrement linaire Partie 5: Format de donnes pour lchange dinformations pour les applications utilisant lISO/IEC 11694-4 ISO/IEC 2014 INTERNA

6、TIONAL STANDARD ISO/IEC 11694-5 Second edition 2014-11-01 Reference number ISO/IEC 11694-5:2014(E)BS ISO/IEC 11694-5:2014ISO/IEC 11694-5:2014(E)ii ISO/IEC 2014 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2014 All rights reserved. Unless otherwise specified, no part of this publication m

7、ay be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of th

8、e requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in SwitzerlandBS ISO/IEC 11694-5:2014ISO/IEC 11694-5:2014(E) ISO/IEC 2014 All rights reserved iii Contents Page Foreword iv Introduction

9、v 1 Scope . 1 2 Normative references 1 3 Terms and definitions . 1 4 General structure .3 4.1 Tags . 4 4.2 The TLV stream . 7 4.3 Guidelines for assigning data elements to data items . 8 5 Directory structure 8 5.1 Directory sectors . 8 6 Data structure 12 6.1 Normal layout .12 6.2 Alternate layout

10、.14 Bibliography .15BS ISO/IEC 11694-5:2014ISO/IEC 11694-5:2014(E) Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC parti

11、cipate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmenta

12、l and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. The procedures used to develop this document and those intended for its further maintenance are described

13、in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the

14、 possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on t

15、he ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the meaning of ISO specific terms and expressions related to conformity assessme

16、nt, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information The committee responsible for this document is ISO/IEC JTC1, Information technology, Subcommittee SC 17, Cards and personal ident

17、ification. This second edition cancels and replaces the first edition (ISO/IEC 11694-5:2006), which has been technically revised. ISO/IEC 11694 consists of the following parts, under the general title Identification cards Optical memory cards Linear recording method: Part 1: Physical characteristics

18、 Part 2: Dimensions and location of the accessible optical area Part 3: Optical properties and characteristics Part 4: Logical data structures Part 5: Data format for information interchange for applications using ISO/IEC 11694-4 Part 6: Use of biometrics on an optical memory cardiv ISO/IEC 2014 All

19、 rights reservedBS ISO/IEC 11694-5:2014ISO/IEC 11694-5:2014(E) Introduction This part of ISO/IEC 11694 is one of a series of International Standards defining the parameters for optical memory cards and the use of such cards for the storage and interchange of digital data. This part of ISO/IEC 11694

20、is specific to optical memory cards using the linear recording method. Characteristics which apply to other specific recording methods shall be found in separate International Standards. This part of ISO/IEC 11694 defines a logical structure to facilitate the interchange of data written to optical m

21、emory cards using the linear recording method. All numbers in this part of ISO/IEC 11694 are written in decimal notation unless otherwise specified. All multi-byte numbers in this part of ISO/IEC 11694 are placed in their respective data structures and written to the media in “little-endian” format.

22、 This format puts the least significant byte of the number first, followed by the more significant byte(s). All examples that show hexadecimal values corresponding to displayed characters use the ASCII character set. Characters written to cards according to this specification can use any desired cha

23、racter set, as long as the character set is specified in the corresponding tag document. ISO/IEC 2014 All rights reserved vBS ISO/IEC 11694-5:2014 ISO/IEC 11694-5:2014(E)BS ISO/IEC 11694-5:2014Identification cards Optical memory cards Linear recording method Part 5: Data format for information inter

24、change for applications using ISO/IEC 11694-4 1 Scope This part of ISO/IEC 11694 defines the data format for optical memory cards necessary to allow compatibility and interchange between systems using the linear recording method. 2 Normative references The following documents, in whole or in part, a

25、re normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/IEC 11694-4, Identification cards Optical memory c

26、ards Linear recording method Part 4: Logical data structures 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO/IEC 11694-4 and the following apply. 3.1 application computer application program which writes to or makes use of the data read from an optic

27、al memory card Note 1 to entry: This also applies more generally to a system that makes use of the card or the way the card is used. 3.2 data element set of data bytes that is only useful in its entirety EXAMPLE A persons surname or a JPEG file containing a single image. 3.3 data file a stream of by

28、tes which is referenced by a single entry in the cards directory Note 1 to entry: A data file can contain either a single data item (associated with a single tag) or a TLV stream having multiple data items. 3.4 data item data element or well-defined set of data elements that is associated with a sin

29、gle tag, which defines its meaning and layout INTERNATIONAL ST ANDARD ISO/IEC 11694-5:2014(E) ISO/IEC 2014 All rights reserved 1BS ISO/IEC 11694-5:2014ISO/IEC 11694-5:2014(E) 3.5 data sector sector (as defined in ISO/IEC 11694-4) that contains all or part of a data file 3.6 directory structure used

30、to keep track of the presence and location of data on a random access storage media 3.7 directory sector sector on a random access media that contains directory information 3.8 layout specific sequence of bytes required in the data item Note 1 to entry: This is in contrast to the meaning of the data

31、 item, which describes its use. EXAMPLE A card can contain two JPEG “files”. The layout of these items is the same, but the meaning can be different. One can be a portrait of the card holder, and the other can be an image of the card holders fingerprint, for example. 3.9 little-endian format format

32、for defining the order of bytes in a multi-byte number Note 1 to entry: This format is sometimes referred to as “Intel” format. The first byte of a multi-byte number contains the least significant byte of the number, and the last byte contains the most significant byte of the number. EXAMPLE If the

33、decimal number 8765 (which is expressed as 223D in hexadecimal notation) is written out as a 16-bit quantity in little-endian format, the series of bytes containing the number is: 3D followed by 22. So the least significant byte (3D hex) is written out followed by the most significant byte (22 hex).

34、 3.10 logical track sequence of bytes, the length of which is the data capacity of a track, which make up part of a file EXAMPLE A file can have a length that exceeds the capacity of a single track on the card. In such a case, the file shall be broken up into several pieces, each of which shall be w

35、ritten to a different track on the card. The reading application shall put the pieces of the file back together after it has read all the tracks containing the file. Each of these “pieces” is considered a “logical track”, with the first piece containing the beginning of the file being counted as log

36、ical track zero. Most of the time, the logical tracks will be written to succeeding physical tracks, so if a file is written starting at physical track 8 for 2 tracks, logical track 0 occupies track 8 and logical track 1 occupies track 9. In some cases, a given logical track can be written twice, so

37、 it can be that the reading application finds logical track 0 at both physical tracks 8 and 9 and finds logical track 1 at physical track 10. In this case, the reader shall ignore the second copy of logical track 0 and paste the contents of tracks 8 and 10 together to form the original file. 3.11 me

38、aning use to which the data item can be put EXAMPLE The data associated with a given tag can have the meaning that it is a colour photograph of the head of the person to whom the card was issued. 3.12 physical track track on the optical memory stripe that is referenced by a physical track address as

39、 defined in ISO/IEC 11694-42 ISO/IEC 2014 All rights reservedBS ISO/IEC 11694-5:2014ISO/IEC 11694-5:2014(E) 3.13 public zone part of the optical stripe on the card that is accessible to all optical card drives Note 1 to entry: Optical memory cards can also contain a private zone that is accessible t

40、o only a specific set of card drives operated by the card issuer. 3.14 tag unique unsigned 16-bit number in the range 0 through 65535 (inclusive) that is used to identify a data item stored on the card Note 1 to entry: A single set of tags applies to any and all data stored in the pubic zone of an o

41、ptical memory card that conforms to this part of ISO/IEC 11694. 3.15 tag document document that completely describes both the meaning and the layout of one or more data items associated with a tag or a numerically contiguous group of tags Note 1 to entry: This document is created by the body which w

42、ishes to issue or update cards and is submitted to the tag issuing body for publication. An organization that desires to create or read and use the described data item(s) shall be able to do so by reading the tag document and any references incorporated in the tag document. 3.16 tag issuing body org

43、anization responsible for issuing tags to organizations which wish to issue or update cards complying with this part of ISO/IEC 11694 Note 1 to entry: The tag issuing body maintains a list of tags to ensure that each tag corresponds to a unique type of data item and publishes tag documents which des

44、cribe the meaning and layout of the data associated with each tag. It is proposed that HID Global be the tag issuing body for ISO/IEC 11694-5. 3.17 tag, length, value (TLV) data stream data storage structure that involves placing multiple data items in serial fashion on a storage medium and keeping

45、track of these items through a tag Note 1 to entry: The tag identifies the meaning and layout of the data, followed by the length of the data in bytes, followed by the value, which is the data itself. The last byte of the “value” part is then optionally followed by another TLV structure within the s

46、tream. The stream is terminated by a “tag” of zero. Although such a data stream is a serial entity, a random access technology can contain any number of such streams, and parts of a TLV stream can be read independently if desired. Each TLV data stream is contained in a file that is referenced by a s

47、ingle entry in the cards directory. 3.18 track physical location on an optical memory card that can contain one or more sectors Note 1 to entry: This term is the same as the term “physical track” and is defined in ISO/IEC 11694-4. 3.19 unique stamp unique 12-byte value that is created based on the t

48、ime of writing and the unique serial number of the optical memory card writing device Note 1 to entry: This stamp is used to identify two separate sectors as containing parts of the same data file. 4 General structure The purpose of this part of ISO/IEC 11694 is to allow for the interchange of data

49、on optical cards by specifying both the directory structure on the card and the method of identifying individual data ISO/IEC 2014 All rights reserved 3BS ISO/IEC 11694-5:2014ISO/IEC 11694-5:2014(E) elements that are written to the card. The directory provides a mapping between the identity of a data element and that elements location on the card. Tags are used to identify data elements both in their meaning and in the layout of the referenced data. This document defines the starting location of t