1、BRITISH STANDARD BS ISO/IEC 13481:1993 Implementation of ISO/IEC 13481:1993 Information technology Datainterchange on130mm optical disk cartridges Capacity:1gigabyte per cartridge UDC 681.327.68BSISO/IEC13481:1993 This British Standard, having been prepared under the directionof the Information Syst
2、ems Technology StandardsPolicy Committee, waspublished under the authorityof the Standards Boardand comes into effect on 15April1994 BSI 01-2000 The following BSI references relate to the work on this standard: Committee reference IST/4 Draft for comment 93/650777DC ISBN 0 580 23306 5 Committees res
3、ponsible for this British Standard The preparation of this British Standard was entrusted by the Information Systems Technology Standards Policy Committee (IST/-) to Technical Committee IST/4, upon which the following bodies were represented: British Computer Society ICI Imagedata Institute of Quali
4、ty Assurance Institution of Electrical Engineers International Computers Limited Kodak Limited Amendments issued since publication Amd. No. Date CommentsBSISO/IEC13481:1993 BSI 01-2000 i Contents Page Committees responsible Inside front cover National foreword ii Foreword viii Text of ISO/IEC 13481
5、1BSISO/IEC13481:1993 ii BSI 01-2000 National foreword This British Standard reproduces verbatim ISO/IEC13481:1993and implements it as the UK national standard. This British Standard is published under the direction of the Information Systems Technology Standards Policy Committee whose Technical Comm
6、itteeIST/4has the responsibility to: aid enquirers to understand the text; present to the responsible international committee any enquiries on interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the U
7、K. NOTEInternational and European Standards, as well as overseas standards, are available from Customer Services, Publications, BSI, Linford Wood, Milton Keynes, MK146LE. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are respons
8、ible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, theISO/IEC title page, pages ii to viii, pages 1 to 80, an inside back cove
9、r and aback cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.ISO/IEC13481:1993(E) ii BSI 01-2000 Contents Page Foreword viii Introduction 1 Section 1. General 1 Scope 2 2 Confo
10、rmance 2 2.1 Optical Disk Cartridges 2 2.2 Generating System 2 2.3 Receiving System 2 3 Normative references 2 4 Definitions 3 4.1 case 3 4.2 Cyclic Redundancy Check (CRC) 3 4.3 embossed mark 3 4.4 entrance surface 3 4.5 Error Correction Code (ECC) 3 4.6 field 3 4.7 format 3 4.8 groove 3 4.9 interle
11、aving 3 4.10 Kerr rotation 3 4.11 land and groove 3 4.12 mark 3 4.13 optical disk 3 4.14 optical disk cartridge (ODC) 4 4.15 polarization 4 4.16 recording layer 4 4.17 Reed-Solomon code 4 4.18 rewritable optical disk 4 4.19 sector 4 4.20 substrate 4 4.21 track 4 4.22 write-once functionality 4 4.23
12、zone 4 5 Conventions and notations 4 5.1 Representation of numbers 4 5.2 Names 5 6 List of acronyms 5 7 General description of the optical disk cartridge 5 8 General requirements 6 8.1 Environments 6 8.1.1 Testing environment 6 8.1.2 Operating environment 6 8.1.3 Storage environment 6 8.1.4 Transpor
13、tation 6 8.2 Temperature shock 7 8.3 Safety requirements 7 8.4 Flammability 7 9 Reference drive 7 9.1 Optical system 7 9.2 Optical beam 8 9.3 Read channels 8ISO/IEC13481:1993(E) BSI 01-2000 iii Page 9.4 Tracking 8 9.5 Rotation of the disk 8 Section 2. Mechanical and physical characteristics 10 Dimen
14、sions and mechanical characteristics of the case 9 10.1 General 9 10.2 Case drawings 9 10.3 Sides, reference axes and reference planes 9 10.3.1 Relationship of Sides A and B 9 10.3.2 Reference axes and case reference planes 9 10.4 Materials 9 10.5 Mass 9 10.6 Overall dimensions 10 10.7 Location hole
15、 10 10.8 Alignment hole 10 10.9 Surfaces on reference planes P 11 10.10 Insertion slots and detent features 12 10.11 Gripper slots 12 10.12 Write-inhibit holes 12 10.13 Media sensor holes 13 10.14 Head and motor window 13 10.15 Shutter 14 10.16 Slot for shutter opener 14 10.17 Shutter sensor notch 1
16、4 10.18 User label areas 15 11 Dimensional and physical characteristics of the disk 15 11.1 Dimensions of the disk 15 11.1.1 Outer diameter 15 11.1.2 Thickness 15 11.1.3 Clamping zone 15 11.1.4 Clearance zone 15 11.2 Mass 15 11.3 Moment of inertia 15 11.4 Imbalance 15 11.5 Axial deflection 15 11.6 A
17、xial acceleration 16 11.7 Dynamic radial runout 16 11.8 Radial acceleration 16 11.9 Tilt 16 12 Drop test 16 13 Interface between disk and drive 16 13.1 Clamping technique 16 13.2 Dimensions of the hub 16 13.2.1 Outer diameter of the hub 16 13.2.2 Height of the hub 16 13.2.3 Diameter of the centre ho
18、le 16 13.2.4 Height of the top of the centre hole at diameter D 9 16 13.2.5 Centring length at diameter D 9 17 13.2.6 Chamfer at diameter D 9 17ISO/IEC13481:1993(E) iv BSI 01-2000 Page 13.2.7 Chamfer at diameter D 8 17 13.2.8 Outer diameter of the magnetizable ring 17 13.2.9 Inner diameter of the ma
19、gnetizable ring 17 13.2.10 Thickness of the magnetizable material 17 13.2.11 Position of the top of the magnetizable ring relative to the disk reference plane 17 13.3 Magnetizable material 17 13.4 Clamping force 17 13.5 Capture cylinder for the hub 17 13.6 Disk position in the operating condition 18
20、 14 Characteristics of the substrate 32 14.1 Index of refraction 32 14.2 Thickness 32 Section 3. Format of information 15 Track geometry 33 15.1 Track shape 33 15.2 Direction of rotation 33 15.3 Track pitch 33 15.4 Track number 33 16 Track format 33 16.1 Formatted Zone 33 16.2 Control tracks 35 16.3
21、 Control Track PEP Zone 35 16.3.1 Recording in the PEP Zone 35 16.3.2 Cross-track loss 36 16.3.3 Format of the tracks of the PEP Zone 36 16.4 Control Track SFP Zones 39 16.4.1 Duplicate of the PEP information 39 16.5 Media information 39 16.6 System Information 44 16.7 Unspecified content 44 16.8 Re
22、quirements for interchange of a user-recorded cartridge 44 16.8.1 Requirements for reading 45 16.8.2 Requirements for writing and erasing 45 17 Sector format 46 17.1 Sector Mark (SM) 47 17.2 VFO areas 48 17.3 Address Mark (AM) 48 17.4 ID and CRC 48 17.5 Postamble (PA) 49 17.6 Offset Detection Flag (
23、ODF) 49 17.7 Gap 49 17.8 Flag 49 17.9 Auto Laser Power Control (ALPC) 49 17.10 Sync 49 17.11 Data field 49 17.11.1 User bytes 49 17.11.2 CRC and ECC 49ISO/IEC13481:1993(E) BSI 01-2000 v Page 17.11.3 Bytes for control information 49 17.11.4 Last bytes of the Data field of the 512-byte sector format 4
24、9 17.11.5 Resync 50 17.12 Buffer 50 18 Recording code 50 19 Defect management 50 19.1 Media initialization 51 19.1.1 Media initialization with certification 51 19.1.2 Media initialization without certification 51 19.2 Write and read procedure 51 19.3 Layout of the User Zone 51 19.3.1 Disk Definition
25、 Structure (DDS) 52 19.3.2 Primary Defect List (PDL) 53 19.3.3 Secondary Defect List (SDL) 54 19.3.4 Zone Structure Table (ZST) 54 Section 4. Characteristics of embossed information 20 ZCAV format 56 20.1 Tracking 56 20.2 Characteristics of pre-recorded information 56 20.2.1 Groove-related signals 5
26、6 20.2.2 Properties of pre-recorded marks 57 20.2.3 Parameters of the read characteristics 57 Section 5. Characteristics of the recording layer 21 Characteristics of the recording layer 59 21.1 Test conditions 59 21.1.1 General 59 21.1.2 Read conditions 59 21.1.3 Write conditions 59 21.1.4 Erase con
27、ditions 59 21.2 Baseline reflectance 60 21.2.1 General 60 21.2.2 Actual value 60 21.2.3 Requirement 60 21.3 Magneto-optical recording in the User Zone 60 21.3.1 Resolution 60 21.3.2 Imbalance of magneto-optical signal 61 21.3.3 Figure of merit for magneto-optical signal 61 21.3.4 Narrow-band signal-
28、to-noise ratio 61 21.3.5 Cross-talk ratio 62 21.3.6 Ease of erasure 62 Annex A (normative) Definition of write and erase pulse width 63 Annex B (normative) Measurement of figure of merit 63 Annex C (informative) Values to be implemented in future standards 64 Annex D (normative) Pointer fields 64 An
29、nex E (normative) CRC for ID fields 65 Annex F (normative) Interleave, CRC, ECC, Resync for the Data field 65 Annex G (informative) Sector retirement guidelines 71 Annex H (informative) Office environment 71ISO/IEC13481:1993(E) vi BSI 01-2000 Page Annex J (informative) Transportation 71 Annex K (nor
30、mative) Requirements for interchange 71 Annex L (normative) SCSI Logical Block to Physical Sector Mapping 73 Annex M (informative) Derivation of the operating climatic environment 75 Annex N (normative) Air cleanliness class 100 000 79 Annex P (informative) Guidelines for using ODCs of Type W/O Insi
31、de back cover Figure 1 Optical system of the Reference Drive 7 Figure 2 Hub dimensions 18 Figure 3 Perspective view of the case 19 Figure 4 Overall dimensions and reference axes 20 Figure 5 a) Surfaces S 1 , S 2 , S 3and S 4of the reference plane P 21 Figure 5 b) Detail of surface S 3 22 Figure 6 In
32、sertion slot and detent 23 Figure 7 Gripper slots 24 Figure 8 Write-inhibit holes 25 Figure 9 Media ID sensor holes 26 Figure 10 Shutter sensor notch viewed from Side A 27 Figure 11 Head and motor window 28 Figure 12 Shutter opening feature 29 Figure 13 Capture cylinder for the hub 30 Figure 14 User
33、 label area 31 Figure 15 Example of phase-encoded modulation in the PEP Zone 35 Figure 16 Path of the laser beam when crossing tracks and the resulting PEP signals 36 Figure 17 Track format in the PEP Zone 36 Figure 18 Sector format in the PEP Zone 36 Figure 19 Sector format for 1024 user bytes 46 F
34、igure 20 Sector format for 512 user bytes 47 Figure 21 Sector Mark pattern 48 Figure 22 Sector assignment of the DMAs for the 1024-byte format 52 Figure 23 Sector assignment of the DMAs for the 512-byte format 52 Figure 24 Example of a sector with Offset Detection Flag for on-land recording (schemat
35、ic) 56 Figure 25 Illustration of the various parameters for read characteristics 58 Figure 26 Definition of I Land I H 61 Figure 27 Amplitude versus frequency for the magneto-optical signal 62 Figure A.1 Definition of the pulse shape 63 Figure F.1 Data field configuration, 1024-byte sectors, ECC wit
36、h10-way interleave 69 Figure F.2 Data field configuration, 512-byte sectors, ECC with 5-way interleave 70 Figure L.1 Physical sector address to LBA mapping 73 Figure M.1 Climatogram of IEC Class 3K3 and the ODC operating environment 77 Figure M.2 Wet bulb temperatures of the operating and storage en
37、vironments 78 Figure N.1 Particle size distribution curve 79ISO/IEC13481:1993(E) BSI 01-2000 vii Page Table 1 Layout of the User Zone for disks with 512-byte sectors 34 Table 2 Layout of the User Zone for disks with 1 024-byte sectors 34 Table 3 Format of the Data field of a sector of the PEP Zone 3
38、9 Table 4 Summary of media information 45 Table 5 Conversion of input bits to Channel bits 50 Table 6 Byte assignment of the Disk Definition Structure 53 Table 7 Primary Defect List 53 Table 8 Secondary Defect List 54 Table 9 Zone Structure Table 55 Table 10 Layout of the zone descriptor 55 Table L.
39、1 LBA to Physical Sector Address Mapping for disks with 512-byte sectors 74 Table L.2 LBA to Physical Sector Address Mapping for disks with 1 024-byte sectors 75ISO/IEC13481:1993(E) viii BSI 01-2000 Foreword ISO (the International Organization for Standardization) and IEC(theInternational Electrotec
40、hnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical a
41、ctivity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical co
42、mmittee ISO/IECJTC1. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least75%of the national bodies casting a vote. International Standard ISO/IEC13481 was prepared b
43、y the European Computer Manufacturers Association (as Standard ECMA-183) and was adopted, under a special “fast-track procedure”, by Joint Technical Committee ISO/IEC JTC1, Information technology, in parallel with its approval by national bodies of ISO andIEC. Annex A, Annex B, Annex D, Annex E, Ann
44、ex F, Annex K, Annex L and Annex N form an integral part of this International Standard. Annex C, Annex G, Annex H, Annex J, Annex M and Annex P are for information only. Patents During the preparation of the ECMA standard, information was gathered on patents upon which application of the standard m
45、ight depend. Relevant patents were identified as belonging to the MAXOPTIX Corporation. However, neither ECMA nor ISO/IEC can give authoritative or comprehensive information about evidence, validity or scope of patent and like rights. The patent holders have stated that licences will be granted unde
46、r reasonable and non-discriminatory terms. Communications on this subject should be addressed to MAXOPTIX CORPORATION 2520 Junction Avenue SAN JOSE CA 95 134 USAISO/IEC13481:1993(E) BSI 01-2000 1 Introduction This International Standard specifies the characteristics of130mm Optical Disk Cartridges (
47、ODC) with a capacity of1Gbyte per cartridge. This International Standard specifies two related but different implementations of such cartridges, viz. Type R/W Provides for data to be written, read, and erased many times over the whole of both recording surfaces of the disk using the thermo-magnetic
48、and magneto-optical effects. Type WO Provides write once, read multiple functionality on the whole of both disk surfaces using the thermo-magnetic and magneto-optical effects.ISO/IEC13481:1993(E) 2 BSI 01-2000 Section 1. General 1 Scope This International Standard specifies the characteristics of130
49、mm optical disk cartridges (ODCs) with a capacity of1Gigabyte per cartridge. It specifies two related, but different implementations of such cartridges: This International Standard specifies: the conditions for conformance testing and the reference drive; the environments in which the cartridges are to be operated and stored; the mechanical, physical and dimensional characteristics of the case and of the cartridge, so as to provide mechanical interchangeability
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1