BS ISO IEC 15459-4-2014 Information technology Automatic identification and data capture techniques Unique identification Individual products and product packages《信息技术 自动识.pdf

1、BSI Standards Publication BS ISO/IEC 15459-4:2014 Information technology Automatic identification and data capture techniques Unique identification Part 4: Individual products and product packagesBS ISO/IEC 15459-4:2014 BRITISH STANDARD National foreword This British Standard is the UK implementatio

2、n of ISO/IEC 15459-4:2014. It supersedes BS ISO/IEC 15459-4:2006 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee IST/34, Automatic identification and data capture techniques. A list of organizations represented on this committee can be obtained on req

3、uest to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014. Published by BSI Standards Limited 2014 ISBN 978 0 580 71967 7 ICS 35.040 Compliance with a Briti

4、sh Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2014. Amendments issued since publication Date Text affectedBS ISO/IEC 15459-4:2014 Information technology Automatic identi

5、fication and data capture techniques Unique identification Part 4: Individual products and product packages Technologies de linformation Identification automatique et techniques de capture de donnes Identification unique Partie 4: Articles individuels et paquetages darticle INTERNATIONAL STANDARD IS

6、O/IEC 15459-4 Reference number ISO/IEC 15459-4:2014(E) Third edition 2014-11-15 ISO/IEC 2014 BS ISO/IEC 15459-4:2014ii ISO/IEC 2014 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2014 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized

7、 otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright o

8、ffice Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ISO/IEC 15459-4:2014(E)BS ISO/IEC 15459-4:2014ISO/IEC 15459-4:2014(E)Contents Page Foreword iv Introduction v 1 Scope . 1 2 Normative references 1 3 T

9、erms and definitions . 1 4 Identities for individual products and product packages . 1 4.1 Qualifiers for individual products and product packages 2 5 Identity for individual products and product packages 3 5.1 General . 3 5.2 Maximum number of characters permissible in an identity . 3 5.3 Permissib

10、le character sets in an identity . 3 6 Implementation of coding using AIDC media . 3 Annex A (normative) What is a product and/or product package? . 4 Annex B (informative) Unique identification for product and product package management 5 Bibliography 9 ISO/IEC 2014 All rights reserved iiiBS ISO/IE

11、C 15459-4:2014ISO/IEC 15459-4:2014(E) Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of

12、International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in li

13、aison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Pa

14、rt 1. In particular the different approval criteria needed for the different types of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the elem

15、ents of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations

16、 received (see www.iso.org/patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about I

17、SOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information The committee responsible for this document is ISO/IEC JTC 1, Information technology, Subcommittee SC 31, Automatic identification and data capture techniques. Thi

18、s third edition cancels and replaces the second edition (ISO/IEC 15459-4:2008), which has been technically revised. ISO/IEC 15459 consists of the following parts (as a result of the reconstruction of previously published parts 1 to 8), under the general title Information technology Automatic identif

19、ication and data capture techniques Unique identification: Part 1: Individual transport units Part 2: Registration procedures Part 3: Common rules Part 4: Individual products and product packages Part 5: Individual returnable transport items (RTIs) Part 6: Groupingsiv ISO/IEC 2014 All rights reserve

20、dBS ISO/IEC 15459-4:2014ISO/IEC 15459-4:2014(E) Introduction Unique identities can occur at many different levels, at item level, on the transport unit, on the returnable transport item, at grouping levels, and elsewhere. Such entities are often handled by several parties, both public and private, t

21、hroughout their lifecycle. Each of these parties must be able to identify and trace such distinct entities so that reference can be made to associated information such as quality inspection data, the chemical substance contained, the batch or lot number of parts, components or raw materials, etc. Th

22、e associated information is typically held in some kind of database. The information can be accessed using EDI exchange or another appropriate access protocol, e.g. a directory access protocol. There are considerable benefits if the identity of the entity is represented as a bar code or other AIDC (

23、Automatic Identification and Data Capture) media and attached to or made a constituent part of that which is being uniquely identified so that it can be read electronically, thus minimizing errors; one identity can be used by all parties; each party can use the identity to look up its computer files

24、 to find the data associated with the entity. All AIDC technologies have the potential to encode an identity. It is expected that application standards, using various automatic identification technologies, will be developed based upon the identity as a prime key. These application standards, which c

25、an include additional rules for which level of identification should be used, are often made available from the Issuing Agency. The identity for products and product packages defined in this part of ISO/IEC 15459, and represented in AIDC media attached to the product or product package, meets the ne

26、eds defined in ISO/IEC 15459-3, Common Rules. ISO/IEC 2014 All rights reserved vBS ISO/IEC 15459-4:2014BS ISO/IEC 15459-4:2014Information technology Automatic identification and data capture techniques Unique identification Part 4: Individual products and product packages 1 Scope This part of ISO/IE

27、C 15459 specifies a unique string of characters for the identification of individual products and product packages. The character string is intended to be represented in a linear bar code symbol or two-dimensional symbol or other AIDC media attached to the entity to meet management needs. To address

28、 management needs different classes of identities are recognized in the various parts of ISO/IEC 15459, which allows different requirements to be met by the identities associated with each class. The rules for the identification of an individual occurrence of a product or product package, understood

29、 to mean the layers zero and one defined in the International Standards ISO 17367 and ISO 17366, respectively, are defined and supported by examples. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its applica

30、tion. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/IEC 646, Information technology ISO 7-bit coded character set for information interchange ISO 3779, Road vehicles Vehicle identifi

31、cation number (VIN) Content and structure ISO/IEC 15459-2, Information technology Automatic identification and data capture techniques Unique identification Part 2: Registration procedures ISO/IEC 15459-3, Information technology Automatic identification and data capture techniques Unique identificat

32、ion Part 3: Common rules ISO/IEC 19762-1, Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 1: General terms relating to AIDC GS1 General Specifications 3 Terms and definitions For the purposes of this document, the terms and definitions gi

33、ven in ISO/IEC 1 9 7 6 2 - 1 a n d ISO/IEC 15459-3 apply. 4 Identities for individual products and product packages Each individual product or product package (See Annex A) shall be unambiguously identified by a qualifier and a string as defined in Clause 5 so that individual products or product pac

34、kages of a given type can be distinguished from other types. The permitted combinations of qualifier and string are determined by the Issuing Agency. INTERNATIONAL ST ANDARD ISO/IEC 15459-4:2014(E) ISO/IEC 2014 All rights reserved 1BS ISO/IEC 15459-4:2014ISO/IEC 15459-4:2014(E) If there is only one

35、individual product in a product package, or one individual product is seen as dominant in the product package, the product package may use the identity as the included sole or dominant individual product (see Clause 4.1). In other cases a product package shall have its own identity, making it possib

36、le to differentiate the product package from the included individual products. Notwithstanding the above, where regulatory requirements or industry practice dictate it may be necessary to assign an identity to the only or all the individual products in a package. 4.1 Qualifiers for individual produc

37、ts and product packages The qualifier component of an identity for a product or product package may use any data format supported by ISO/IEC 15434 or ISO/IEC 9834-1. What formats may be used are to be specified by the Issuing Agency rules. For the purpose of this standard examples are not meant to b

38、e exhaustive, but rather representative of the full suite of data qualifiers possible to use and relevant to this standard; 4.1.1 Identity using a serial component GS1 Application Identifiers 8004 If this method is used to create the identity each unique identity issuer would select the appropriate

39、GS1 Application Identifier, conforming to the requirements of the GS1 General Specification, to act as the qualifier of the identity. ASC MH 10 Data Identifiers 25S or 3I If this method is used to create the identity each unique identity issuer would select the appropriate ASC MH10 Data Identifier a

40、s required by the appropriate Issuing Agency to act as the qualifier of the identity. NOTE The structure of an identity following “3I” is defined in ISO 3779, Road vehicles Vehicle identification number (VIN) Content and structure. “3I” is mentioned here to avoid multiple individual unique identitie

41、s being marked on or attached to a product. When employing an ISO/IEC compliant high capacity AIDC data carrier an additional option is the object identifiers: 1 0 15459 4 7: for a product package identifier for item management defined by the IAC. This is independent of, and unlike the structures be

42、low, does not support mapping to GS1 Application Identifiers and ASC MH 10 Data Identifiers. 1 0 15459 4: for a product identifier for item management defined by the IAC. This is inde- pendent of, and unlike the structures below, does not support mapping to GS1 Application Identifiers and ASC MH 10

43、Data Identifiers. 1 0 15459 4 2: for a product identifier for item management equivalent to GS1 Application Identifier 8004 1 0 15459 4 4: for a product identifier for item management equivalent to ASC MH10 Data Identifier 25S or 3I 4.1.2 Identity using a separate serial component GS1 Application Id

44、entifiers combination 01 plus 21 If this method is used to create the identity each unique identity issuer would select the appropriate GS1 Application Identifier, conforming to the requirements of the GS1 General Specification, to act as the qualifier of the identity.2 ISO/IEC 2014 All rights reser

45、vedBS ISO/IEC 15459-4:2014ISO/IEC 15459-4:2014(E) ASC MH 10 Data Identifiers combination 25P plus S If this method is used to create the identity each unique identity issuer would select the appropriate ASC MH10 Data Identifier as required by the appropriate Issuing Agency to act as the qualifier of

46、 the identity. When employing an ISO/IEC compliant AIDC data carrier an additional option is the object identifiers: 1 0 15459 4 3: for a product identifier for item management equivalent to a Serialised GTIN (GS1 Application Identifiers 01 plus 21) 1 0 15459 4 6: for a product identifier for item m

47、anagement equivalent to a serialised product (ASC MH 10 Data Identifiers 25Pplus S) 5 Identity for individual products and product packages 5.1 General An identity is assigned to an individual product or product package by an identity issuer. This shall be done in accordance with the rules establish

48、ed by an authorized Issuing Agency as identified in ISO/IEC 15459-3 and ISO/IEC 15459-2. 5.2 Maximum number of characters permissible in an identity The identity for individual products and product packages shall not contain more than 50 characters. For efficient use within various AIDC data carrier

49、 systems, it is recommended that the number of characters to be coded by one line linear bar code should not exceed 20 characters, and number of characters should be kept as short as possible regardless of the permissible maximum of 50 characters. 5.3 Permissible character sets in an identity The identity shall only contain upper-case alphabetic characters and numeric digits of the invariant character set of ISO/IEC 646, see Annex