BS ISO IEC 15459-5-2014 Information technology Automatic identification and data capture techniques Unique identification Individual returnable transport items (RTIs)《信息技术.pdf

1、BSI Standards Publication BS ISO/IEC 15459-5:2014 Information technology Automatic identification and data capture techniques Unique identification Part 5: Individual returnable transport items (RTIs)BS ISO/IEC 15459-5:2014 BRITISH STANDARD National foreword This British Standard is the UK implement

2、ation of ISO/IEC 15459-5:2014. It supersedes BS ISO/IEC 15459-5:2007 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee IST/34, Automatic identification and data capture techniques. A list of organizations represented on this committee can be obtained on

3、 request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014. Published by BSI Standards Limited 2014 ISBN 978 0 580 71968 4 ICS 35.040 Compliance with a B

4、ritish Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2014. Amendments issued since publication Date Text affectedBS ISO/IEC 15459-5:2014 Information technology Automatic id

5、entification and data capture techniques Unique identification Part 5: Individual returnable transport items (RTIs) Technologies de linformation Identification automatique et techniques de capture de donnes Identification unique Partie 5: Entits de transport retournables individuelles (RTIs) INTERNA

6、TIONAL STANDARD ISO/IEC 15459-5 Reference number ISO/IEC 15459-5:2014(E) Second edition 2014-11-15 ISO/IEC 2014 BS ISO/IEC 15459-5:2014ii ISO/IEC 2014 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2014 All rights reserved. Unless otherwise specified, no part of this publication may be rep

7、roduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the request

8、er. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ISO/IEC 15459-5:2014(E)BS ISO/IEC 15459-5:2014ISO/IEC 15459-5:2014(E)Contents Page Foreword iv Introduction v 1 Scope . 1 2 Normati

9、ve references 1 3 Terms and definitions . 1 4 Identities for individual returnable transport items (RTIs) . 1 5 Identity for returnable transport items (RTIs) 2 5.1 General . 2 5.2 Maximum number of characters permissible in a string . 2 5.3 Permissible character sets in an identity . 2 6 Implementa

10、tion of coding using AIDC media . 3 Annex A (informative) Unique identification of returnable transport items (RTIs) 4 Annex B (informative) Returnable versus recyclable and reusable items 6 Bibliography 9 ISO/IEC 2014 All rights reserved iiiBS ISO/IEC 15459-5:2014ISO/IEC 15459-5:2014(E) Foreword IS

11、O (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committ

12、ees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the wor

13、k. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criter

14、ia needed for the different types of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of paten

15、t rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade na

16、me used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Techni

17、cal Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information The committee responsible for this document is ISO/IEC JTC 1, Information technology, Subcommittee SC 31, Automatic identification and data capture techniques. This second edition cancels and replaces the first e

18、dition (ISO/IEC 15459-5:2007), which has been technically revised. ISO/IEC 15459 consists of the following parts (as a result of the reconstruction of previously published parts 1 to 8), under the general title Information technology Automatic identification and data capture techniques Unique identi

19、fication: Part 1: Individual transport units Part 2: Registration procedures Part 3: Common rules Part 4: Individual products and product packages Part 5: Individual returnable transport items (RTIs) Part 6: Groupingsiv ISO/IEC 2014 All rights reservedBS ISO/IEC 15459-5:2014ISO/IEC 15459-5:2014(E) I

20、ntroduction Unique identities can occur at many different levels, at item level, on the transport unit, on the returnable transport item, at grouping levels, and elsewhere. Such entities are often handled by several parties, both public and private, throughout their lifecycle. Each of these parties

21、must be able to identify and trace such distinct entities so that reference can be made to associated information such as quality inspection data, the chemical substance contained, the batch or lot number of parts, components or raw materials, etc. The associated information is typically held in som

22、e kind of database. The information can be accessed using EDI exchange or another appropriate access protocol, e.g. a directory access protocol. There are considerable benefits if the identity of the entity is represented as a bar code or other AIDC (Automatic Identification and Data Capture) media

23、and attached to or made a constituent part of that which is being uniquely identified so that it can be read electronically, thus minimizing errors; one identity can be used by all parties; each party can use the identity to look up its computer files to find the data associated with the entity. All

24、 AIDC technologies have the potential to encode an identity. It is expected that application standards, using various automatic identification technologies, will be developed based upon the identity as a prime key. These application standards, which can include additional rules for which level of id

25、entification should be used, are often made available from the Issuing Agency. The identity for returnable transport items (RTIs) defined in this part of ISO/IEC 15459, and represented in AIDC media attached to the RTIs, meets the needs defined in ISO/IEC 15459-3, Common rules. ISO/IEC 2014 All righ

26、ts reserved vBS ISO/IEC 15459-5:2014BS ISO/IEC 15459-5:2014Information technology Automatic identification and data capture techniques Unique identification Part 5: Individual returnable transport items (RTIs) 1 Scope This part of ISO/IEC 15459 specifies a unique string of characters for the identif

27、ication of individual returnable transport items (RTIs). The character string is intended to be represented in a bar code label or other AIDC media attached to the item to meet management needs. To address management needs different classes of identities are recognized in the various parts of ISO/IE

28、C 15459, which allows different requirements to be met by the identities associated with each class. The rules for the identification for RTIs, with the identity being relevant for the complete life cycle of the item, are defined and supported by example. 2 Normative references The following documen

29、ts, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/IEC 646, Information tec

30、hnology ISO 7-bit coded character set for information interchange ISO/IEC 15459-2, Information technology Automatic identification and data capture techniques Unique identification Part 2: Registration procedures ISO/IEC 15459-3, Information technology Automatic identification and data capture techn

31、iques Unique identification Part 3: Common rules ISO/IEC 19762-1, Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 1: General terms relating to AIDC GS1 General Specifications 3 Terms and definitions For the purposes of this document, the

32、terms and definitions given in ISO/IEC 19762-1 and ISO/IEC 15459-3 apply. 4 Identities for individual returnable transport items (RTIs) Each individual RTI shall be unambiguously identified by a qualifier and a string as defined in Clause 5 so that individual items of this type can be distinguished

33、from items of other types. The qualifier component of an identity for a returnable transport item may use any data format supported by ISO/IEC 15434 or ISO/IEC 9834-1. What formats to be used are to be specified by the INTERNATIONAL ST ANDARD ISO/IEC 15459-5:2014(E) ISO/IEC 2014 All rights reserved

34、1BS ISO/IEC 15459-5:2014ISO/IEC 15459-5:2014(E) Issuing Agency rules. For the purpose of this standard examples are not meant to be exhaustive, but rather representative of the full suite of data qualifiers possible to use and relevant to this standard; GS1 Application Identifiers 8003 or 8004 If th

35、is method is used to create the identity each unique identity issuer would select the appropriate GS1 Application Identifier, conforming to the requirements of the GS1 General Specification, to act as the qualifier of the identity. ASC MH 10 Data Identifier 25B If this method is used to create the i

36、dentity each unique identity issuer would select the appropriate ASC MH10 Data Identifier as required by the appropriate Issuing Agency to act as the qualifier of the identity. When employing an ISO/IEC compliant high capacity AIDC data carrier an additional option is the object identifiers: 1 0 154

37、59 5: for an RTI identifier for item management defined by the IAC. This is inde- pendent of, and unlike the structures below, does not support mapping to, GS1 Application Identifiers and ASC MH 10 Data Identifiers; 1 0 15459 5 1: for an RTI identifier for item management equivalent to GS1 Applicati

38、on Identi- fier 8003 or 8004; 1 0 15459 5 3: for an RTI identifier for item management equivalent to ASC MH 10 Data Identi- fier 25B; 5 Identity for returnable transport items (RTIs) 5.1 General An identity is assigned to an RTI by an identity issuer. This shall be done in accordance with the rules

39、established by an authorized Issuing Agency, as identified in ISO/IEC 15459-3 and ISO/IEC 15459-2. 5.2 Maximum number of characters permissible in a string The identity for individual RTIs shall not contain more than 50 characters. For efficient use within various AIDC data carrier systems, it is re

40、commended that the number of characters to be coded by one line linear bar code should not exceed 20 characters, and number of characters should be kept as short as possible regardless of the permissible maximum of 50 characters. 5.3 Permissible character sets in an identity The identity shall only

41、contain upper-case alphabetic characters and numeric digits of the invariant character set of ISO/IEC 646, see Annex A in ISO/IEC 15459-3. NOTE An Issuing Agency is permitted to make additional restrictions on the repertoire for identities using its IAC. Any data processing system shall be capable o

42、f processing identities using the full repertoire of characters permitted for identities for RTIs.2 ISO/IEC 2014 All rights reservedBS ISO/IEC 15459-5:2014ISO/IEC 15459-5:2014(E) 6 Implementation of coding using AIDC media All AIDC technologies have the potential to encode an identity. It is expecte

43、d that application standards for entities, using various automatic identification technologies, will be developed based upon the ISO/IEC 15459 identity as a prime key. These application standards may be made available from the Issuing Agency. ISO/IEC 2014 All rights reserved 3BS ISO/IEC 15459-5:2014

44、ISO/IEC 15459-5:2014(E) Annex A (informative) Unique identification of returnable transport items (RTIs) T he ex amples show n in t his A nnex are illust rat ive of t hose qua lif iers per mit ted and are not to be ex haust ive. A.1 Role of the Issuing Agency in providing application guidance for re

45、turnable transport items In addition to the requirements of an Issuing Agency, outlined elsewhere in ISO/IEC 15459, each Issuing Agency is expected to provide guidelines if individual RTI identification is relevant to its IAC domain. A.2 Considerations with returnable transport item identification T

46、o illustrate the usage of an individual identity, the hypothetical example is given using the two issuing agencies (IAs) recognized by the Registration Authority (RA), GS1 and ODETTE. The construction of the identity minimally includes the Issuing Agency Code (IAC), Company Identification Number (CI

47、N), and string component (ID) assuming that the ID is unambiguous within the CIN. In some cases IDs are not unambiguous within the CIN but are unambiguous within a specific asset type under the control of a company. If the ID is not unambiguous within the company, the identity must include a company

48、 asset type code, or similar. Thus the identity established by the identity issuer cannot be the same as that established by another. Moreover, ISO/IEC 15459-2 ensures all the identities are unambiguous. A.3 GS1 unique identification The rules of GS1, to whom the Issuing Agency Codes “0” till “9” ha

49、ve been allocated by the Registration Authority, are that the string for RTIs consists of no more than 14 numeric digits followed by no more than 16 alphanumeric characters. The first numeric string of characters is allocated by GS1 to the string issuer (company prefix) and the following characters are assigned by the string issuer. EXAMPLE 1 Typical RTI identity issued under the rules of GS1. In this example, the IAC/CIN/Asset Identity is “109875